So now that I moved my miners to RVN I want to make money with ETH but I don't have 32 ETH to stake, more like 1.5 ETH. Is there a pool for staking how does it work? Is there a reputable pool for staking? I was going to do ethermine but they don't allow staking from the USA. I'm not gonna sell unless the prices goes way up again and I'm fine with just holding it but I'd like to earn interest or wherever if someone could help point me in the right direction.

I need to buy 2x APW8 16.32V - 20.04V power supply for Antminer S15. I'm in the USA and willing to pay shipping or if in CA i could drive for pickup.

I have 3x S15 and 2 of them the power supply just took a shit in November, I sent them off to myrig for repair and they cant fix them. So now i have 2 miners and no power supply. I've looked everywhere and i cant find any APW8 power supplies 16.32V - 20.04V.

I was looking around and noticed that the APW9 is 14.5V-21V and looks like the same hookup as the APW8 but it has 2 input ports for power so my question is will the APW9 work on an S15 miner and why is there 2 power ports does that mean i need 2x 240v lines for each power supply if i was to use it?

If nothing else where can i buy a APW8 16.32V - 20.04V

I haven't opened ravencoin core in a while and i noticed a strange deposit that i didn't make into my account. the Tx hash is below. can someone explain why i have 1 SCAMCOIN in my RVN wallet and WTF it is or where it came from? I'm rather confused here on this one, thanks.
Oh and on my Tx list in RVN core under type where it normally says received with it says assets received, WTF does that mean?

https://explorer.ravenland.org/tx/2b74b5fc46b867d3e70086a2ba7b0d2158e9b2b8469442d7b4bbeea4dec0619a

Code:

Status: 30184 confirmations
Date: 5/2/2021 14:29
From: unknown
To: RHx6duJEVwDhxNDVsk5Y3g59oZLTqYNaY3 (own address)
Credit: 1 SCAMCOIN
Net RVN amount: 0.00000000 RVN
Transaction ID: 2b74b5fc46b867d3e70086a2ba7b0d2158e9b2b8469442d7b4bbeea4dec0619a
Transaction total size: 454 bytes
Output index: 0

Ive been mining ETH for over a year on phoenix and decide to switch to RVN and i can get NB miner to work fine but i heard i could get a few extra mh from team red miner. i set it up as right as i can tell  and when it loads it says it timed out trying to connect to the pool. pics attached for ref. in my config ive tried the way the strantum is written and tried -p with a blank spot and ive tried with it as 1 like the pool says but nothing seems to work. I'm super confused and its prob something stupid that i missed please let me know any ideas to make it work.

I'm at my wit's end here I can't figure out WTF is wrong with my mining rig.
Today it just crashed randomly and I can't get it to work again.
Did DDU and installed 20.8.1
Running 5.4c and tried 5.5c with no change
Tried changing my OC on afterburner to stock speed or lower no change
I got 6x 570 8gb, biostar TB350-BTC, AMD ryzen 3 1200, and 8gb 2400 ram. the computer turns on and runs just fine and I can use it with no issues until it try to mine then it goes to shit.
Usually within seconds of the last GPU DAG generated thing coming up and all 6 cards reading their individual speeds screen goes blank and I gotta reboot.
Tried changing the config file to -gt 0 instead of 15 no change. actually it got worse when I did that as soon as the auto tune popped up it crashed in seconds before the DAG was even done I think. I don't but it def crashes faster when the -gt is set to anything besides 15 which is where it's been at for like a year and a half with no issue.
I've also cleared the CMOS and redid the bios settings, I also tried loading the bios defaults. I also just updated the bios to the newest one with no change, I was only 1 bios very behind the current so not much of an update I suppose. Although after the bios update it mines for a second then right before it crashed I noticed GPU4 went from 35c to 513c then it crashed but with a BSOD instead of a black screen, bsod said vga failure. Normally mining temp is like 65-70c but since it is just starting that's why it's 35c. How can it runaway spike like that?
So I did 1 card at a time and ran for 5 min and nothing happened. Then I ran 4 nothing then 5 nothing all 6 are running for 9 min as I type this and all is well running at stock everything no dials have been adjusted in afterburner. I'll keep it running and monitor till I go to bed. But I still don't what's wrong. This seems like a I fixed it and I didn't do anything situation and it's pissing me off.

So I've been mining BTC for like 5 years now but have started GPU mining in the last few months and am a bit confused on mining calculators.
With BTC the calculators are always quite accurate.
But I mined ETC for 2 months and I made about 0.62 ETC/day and the calculators said I should be making 1.3ETC/day. So I switched to ETH and it says I will only make 0.01 ETC/day but I'm mining 0.025 ETC/day.
Why are calculators so accurate on some and sooooo wildly off on other coins?

My PSU for my S15 broke and cant be repaired (I tried and it didn't end well), I need a new power supply for the miner. it is the APW8 16.32V-20.04V model that came off the miner. I'm in So-Cal if anyone is within like 3 hour drive I can pickup to save shipping hassle. Open to reasonable offers.

So I went full retard this morning… my housing complex has quiet hours 2200-0600 and someone made a complaint for my miners so for the last few days now I have to unplug them at night.
I have 3x S9 and 3x S15 the S9 run off 120v and the S15 on 240v. When I plugged them in this morning I plugged one S15 with the 120v plug and it turned on and I went back to bed till like 5 min later I heard the breaker trip and I went to investigate.
Now my S15 will not power on at all nothing no lights or fans. Is there any cheap way to solve this? Or how do I go about trying to fix it?