I have a pretty basic motherboard, being a Gigabyte GA-M61PME-S2P

It has 1 PCIe x16 slot, and I tried putting my Asus 5770 graphics card in it, but the system wouldn't boot - it just kept making a ticking noise (when booting normally, it makes that noise just once on power-on, so hearing the noise repeated says to me it is trying to restart itself about every 2 seconds).

As far as I can tell, the BIOS settings seem correct (they specify to use the graphics card when there is one).

It boots normally again when I unplug the card. Any suggestions?

Would be a shame if I couldn't get it working, as I had to take to my case with tin-snips to make the card fit! ...lol

I have an Asus M4A87TD motherboard, with one PCI-e x16 slot, one PCI-e x4 slot, and one PCI-e x1 slot.

I'd like to run a 5770 card from the x1 slot, and a 5850 card from the x16 slot. Is that likely to overheat any connections on the motherboard? (The graphics cards presumably draw most of their power from a connection directly to the PSU, right?)

Thanks!

I have an Asus M4A87TD motherboard with a 5700 gfx card. I'd like to add another graphics card for mining.

I understand my motherboard has one PCIe 2.0 x16 slot, (currently the 5770 will be in there), one PCIe 2.0 x4 slot, and one PCIe 2.0 x1 slot. Does this mean I could add 2 more cards if I wanted to?

Thanks

[27W]

Ok, I have to do some posts in the newbies forum to get greater access, so I'll try to share something worthwhile.

I've been mining for about a week now and my head is spinning from all the reading I've done on the topic. A key factor in profitability of mining is obviously cost of the power to run the equipment, especially for an amateur user like me who just wants to get some value out of a graphics card. I have a power meter, so measuring my current wattage is as easy as plugging the box into it.

The hardware in my box is bottom-end gaming and is about 15 months old. I bought what I think is good quality brands but economical hardware and it's proved faultless so far. In particular I made an effort to get an efficient (but value for money) PSU, so unbranded equipment at least will probably use a few % more power than mine.

Hardware:
Corsair 400W PSU
ASUS Radeon (ATI) EAH5770
AMD Phenom II X2 555 3.2Ghz CPU
Seagate 500GB 7200 16MB SATA
(Running Win 7)

Power consumption (excluding monitor):
Idle: 27W
GPU Mining (Phoenix miner, 1 thread, 92% load on GPU, CPU load about 10%): 69.5 Watts, 161 Mhash/s
GPU Mining (Phoenix miner, 2 threads, 96% load on GPU, CPU load about 10%): 70.5 W, 167 Mhash/s (but with substantially more stale blocks)
GPU & CPU Mining (Phoenix miner for GPU - 1 thread, Bitcoin app for CPU, 1 GPU thread, CPU load 100%): 94.5 W, 165 Mhash/s from GPU, 1.9Mhash/s from CPU

Cost of power = NZ$0.21168/kWh

I'm guessing that CPU mining is so inefficient I won't recoup my power costs, so I won't look into that further.

Consumption of GPU mining (if I'm using the computer anyway) = just the additional cost of the GPU load = 69.5-27 = 42.5W
Consumption of GPU mining (if I'd've otherwise shut down the PC) = 69.5W

The PC often is left on during the day for a number of hrs, let's say 10.5hrs average.
Daily cost = 10.5hrs * (42.5W/1000W) + (24hrs - 10.5hrs) * (69.5W/1000W) * $0.21168/kWh = 1.3845kWh * $0.21168kWH = NZ$0.29307096

It's winter in NZ right now, so the waste heat actually saves on space heating too. Our heat pump (fairly old) is probably 2.5:1 efficiency or worse, so the actual net cost is probably more like NZ$0.20/day.

(If I couldn't make good use of the waste heat and the time the PC was on, the cost would be about NZ$0.353)

NZ$1 = approx US$0.80 I think, so net power costs are about US$0.16/day

My earnings over the approx 5 days I've had the GPU mining set up have averaged about 0.15BTC/day through pooled mining, which if valued at US$15 per BTC would earn me US$2.25/day for my 16 cents.

If I'd done some work in the office instead of writing this, I probably could've earned more than a weeks mining, but I guess it's nice to have an interesting hobby...

ps: My GPU output drops by around 10Mhash/s when leaving Firefox open (with about 20-30 tabs open mind you, due to my crazy browsing habits)

Have tried following the instructions for guiminer to set up GPU mining. Installed the AMD APP SDK software, and running "Geeks3D GPU CAPS Viewer" I see OpenCL(CPU) is now ticked, however under OpenCL it says "No GPU Support". The GL tests in the CAPS Viewer app work swimmingly though.

Can anyone share how can I make use of my GPU? Thanks!

GUIMiner version: v2011-06-14
Operating system: Windows 7 Home Premium
Miner backend: Will use whatever will work with my GPU!
Video card: ATI Radeon HD 5770
Server: mineco.in