Bitcoin Forum
July 15, 2024, 03:29:31 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1]
1  Bitcoin / Bitcoin Technical Support / Speeding up transaction with Electrum/Ledger -Transaction not showing? on: May 09, 2023, 01:46:47 PM
Hi All

I sent some BTC to Local Coin Swap on Saturday 06/05/2023 (UK) and did not check mempool and selected my usual low fee as i'm in no rush. 

-Fee   4,251 sat£0.94
-Fee rate   25.7 sat/vB

As i can see from reading on here it is very congested and its not processing.

I then went to 'bump it'/increase the fee using Electrum, i connect fine but to load my transaction history i have to select the middle option/path -

p2sh-segwit (p2wkph-p2sh)

The bottom option that it recommends in the guide does not load any transaction history at all?

GUIDE - https://support.ledger.com/hc/ru/articles/6183300395037-How-to-speed-up-a-stuck-Bitcoin-BTC-transaction-with-Electrum?docs=true

When all my transactions are loaded it does not show the transaction that is stuck? Also the odd thing is that when i sent it on the Saturday 6th it did show in Local Coin Swap but now it is has gone/removed.

When you try to look at your transaction history on LCS it only shows your trades and not what goes in/out of your wallet!

Anyone got any ideas on what is going on here and why the transaction does not show on Electrum but does on my ledger?

What are my next steps, what are my options if any? It makes no sense that its not showing on Electrum??

Here it is - https://mempool.space/tx/4d915efe1c467c2611896c2314c91f9b5283a32bb69fb399d6fb7f152990421e

Anyone help?

Cheers


2  Economy / Trading Discussion / Sold Bitcoin and received bank payment through Monese? Is it safe?! on: April 12, 2023, 08:49:07 AM
Hi all

I just sold a small amount of BTC that was held in an escrow until I receive payment into my Barclays current account.

The mine is have come through and is showing in my account but Iím unsure if they can do a charge back and scan me?!

Anyone dealt with this. I have googled it but canít get a clear answer.

Cheers
3  Bitcoin / Mining software (miners) / HELP -BMminer Version and Harware Version not found? Ebay purchase?? on: November 15, 2022, 04:11:57 PM
Hi All

Just purchased a miner of Ebay secondhand and plugged in to test its on old FW

Miner Type   Antminer S9
Hostname   antMiner
Model   GNU/Linux
Hardware Version   
Kernel Version   Linux 3.14.0-xilinx-g16220c3 #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
File System Version   Fri May 31 10:59:27 CST 2019
Logic Version   V1.3.22
BMminer Version   
Uptime   9
Load Average   0.30, 0.30, 0.14

Been running for over 40 mins and done one reboot, tried flashing with older Bitmain FW , fixed and auto frew, will not as its SSH locked.

I don't want to install BrainsOS yet as i may have it to return and have yet to find a way to downgrade from it (could i generate a backup and restore from there after flashing Brains via  NAND/SD?)

Kernel log below-

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
  • 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at f0006000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040196] pid_max: default: 32768 minimum: 301
[    0.040409] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040430] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042571] CPU: Testing write buffer coherency: ok
[    0.042895] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042952] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043171] L310 cache controller enabled
[    0.043190] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120988] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210365] SMP: Total of 2 processors activated.
[    0.210373] CPU: All CPU(s) started in SVC mode.
[    0.211040] devtmpfs: initialized
[    0.213465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214652] regulator-dummy: no parameters
[    0.221513] NET: Registered protocol family 16
[    0.223781] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226035] cpuidle: using governor ladder
[    0.226048] cpuidle: using governor menu
[    0.233386] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.234892] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.234905] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235009] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.256605] bio: create slab <bio-0> at 0
[    0.257992] vgaarb: loaded
[    0.258695] SCSI subsystem initialized
[    0.259581] usbcore: registered new interface driver usbfs
[    0.259756] usbcore: registered new interface driver hub
[    0.259986] usbcore: registered new device driver usb
[    0.260661] media: Linux media interface: v0.10
[    0.260816] Linux video capture interface: v2.00
[    0.261205] pps_core: LinuxPPS API ver. 1 registered
[    0.261217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261345] PTP clock support registered
[    0.261701] EDAC MC: Ver: 3.0.0
[    0.262877] Advanced Linux Sound Architecture Driver Initialized.
[    0.265594] DMA-API: preallocated 4096 debug entries
[    0.265607] DMA-API: debugging enabled by kernel config
[    0.265682] Switched to clocksource arm_global_timer
[    0.286667] NET: Registered protocol family 2
[    0.287307] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287402] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287561] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287627] TCP: reno registered
[    0.287645] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.287949] NET: Registered protocol family 1
[    0.288290] RPC: Registered named UNIX socket transport module.
[    0.288302] RPC: Registered udp transport module.
[    0.288311] RPC: Registered tcp transport module.
[    0.288319] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288332] PCI: CLS 0 bytes, default 64
[    0.288755] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290734] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292113] bounce pool size: 64 pages
[    0.292980] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293180] msgmni has been set to 1486
[    0.293938] io scheduler noop registered
[    0.293951] io scheduler deadline registered
[    0.293988] io scheduler cfq registered (default)
[    0.304955] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.304974] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427362] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999121] console [ttyPS0] enabled
[    1.003376] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.011002] [drm] Initialized drm 1.1.0 20060810
[    1.028016] brd: module loaded
[    1.037389] loop: module loaded
[    1.046993] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052747] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060848] libphy: XEMACPS mii bus: probed
[    1.065221] ------------- phy_id = 0x3625e62
[    1.070118] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085339] ehci-pci: EHCI PCI platform driver
[    1.092567] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099397] usbcore: registered new interface driver usb-storage
[    1.106261] mousedev: PS/2 mouse device common for all mice
[    1.112341] i2c /dev entries driver
[    1.119270] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124748] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130661] Xilinx Zynq CpuIdle Driver started
[    1.135498] sdhci: Secure Digital Host Controller Interface driver
[    1.141623] sdhci: Copyright(c) Pierre Ossman
[    1.146032] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152763] mmc0: no vqmmc regulator found
[    1.156810] mmc0: no vmmc regulator found
[    1.195706] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204393] usbcore: registered new interface driver usbhid
[    1.209908] usbhid: USB HID core driver
[    1.214613] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.220909] nand: Micron MT29F2G08ABAEAWP
[    1.224875] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.230814] Bad block table found at page 131008, version 0x01
[    1.237035] Bad block table found at page 130944, version 0x01
[    1.243007] nand_read_bbt: bad block at 0x000000140000
[    1.248165] 3 ofpart partitions found on MTD device pl353-nand
[    1.253916] Creating 3 MTD partitions on "pl353-nand":
[    1.259066] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.267097] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.274389] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.285114] TCP: cubic registered
[    1.288380] NET: Registered protocol family 17
[    1.293019] Registering SWP/SWPB emulation handler
[    1.298906] regulator-dummy: disabling
[    1.303173] UBI: attaching mtd1 to ubi0
[    1.829407] UBI: scanning is finished
[    1.840979] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.848055] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.854798] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.861502] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.868359] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.874328] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.881459] UBI: max/mean erase counter: 26/13, WL threshold: 4096, image sequence number: 267830735
[    1.890577] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.899792] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.899797] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.903698] ALSA device list:
[    1.903701]   No soundcards found.
[    1.920069] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.988499] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.994426] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.003568] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.013443] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.018517] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.030003] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.037201] devtmpfs: mounted
[    2.040309] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.884574] random: dd urandom read with 1 bits of entropy available
[    3.275721]
[    3.275721] bcm54xx_config_init
[    4.365729]
[    4.365729] bcm54xx_config_init
[    7.366556] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.372641] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.892852] In axi fpga driver!
[   19.895946] request_mem_region OK!
[   19.899314] AXI fpga dev virtual address is 0xf0200000
[   19.904418] *base_vir_addr = 0xc51e
[   19.919141] In fpga mem driver!
[   19.922430] request_mem_region OK!
[   19.926042] fpga mem virtual address is 0xf3000000
[   20.705009]
[   20.705009] bcm54xx_config_init
[   21.794883]
[   21.794883] bcm54xx_config_init
[   24.795410] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.801431] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  438.144645] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6efe000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5cf7000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 81749ccc6880881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=1
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[29] has core num=4
Chain[5] ASIC[35] has core num=2
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[15] has core num=4
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[41] has core num=1
Chain[6] ASIC[48] has core num=2
Chain[6] ASIC[54] has core num=1
Chain[6] ASIC[56] has core num=5
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[16] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,-3,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1831 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=29907 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=25927 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=19821 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 81749ccc6880881c
Checking fans...
get fan[4] speed=4560
get fan[5] speed=5760
get fan[4] speed=4560
get fan[5] speed=5760
get fan[4] speed=4560
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x47 0x0d 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x48 0x0b 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[29] has core num=4
Chain[J6] ASIC[35] has core num=2
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[15] has core num=4
Chain[J7] ASIC[16] has core num=1
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[48] has core num=2
Chain[J7] ASIC[54] has core num=1
Chain[J7] ASIC[56] has core num=5
Chain[J8] has core num in PIC
Chain[J8] ASIC[16] has core num=15
miner total rate=13551GH/s ideal_total_hash_rate = 13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637


Miner fix freq ...
totalRate = 13551, fixed_totalRate = 13635
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637

max freq = 637
totalRate = 13551, fixed_totalRate = 13500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:43 remote:46 offset:28
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] PIC temp offset: 62,-3,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[7] chip[244] local:38 remote:39 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,-5,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[8] chip[244] local:38 remote:41 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4526 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4523 voltage limit=940 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 940
single board rate=4502 voltage limit=940 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
start thread for read temp
setStartTimePoint total_tv_start_sys=810 total_tv_end_sys=811
restartNum = 2 , auto-reinit enabled...
bring_up_pcb_temp = 51
setting to working voltage...
voltage_check_done
avg hash rate = 0.000000, ideal hash rate = 13500
hash rate is low...
Fatal Error: network connection lost!
max pcb temperature:67, fan num:2, error counter:1
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=67
Chain[5] Chip[62] junction temperature=78
Special fix Chain[5] Chip[62] middle Temp = 82
Done read temp on Chain[5]
Chain[6] Chip[62] junction temperature=77
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=62
Chain[7] Chip[62] junction temperature=73
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
Max pcb temp : 67
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

Cheers

EDIT

I should also add red leds on all 3 boards, constant red led onfront/status led, cards are warm/its blowing warm air and fans are fine and speeds are altering slightly?

4  Bitcoin / Mining support / HELP PLEASE -Lost ALL my miners after internet outage? on: November 07, 2022, 12:14:59 PM
Hi

I noticed seven of my remote s9 miners were off online and when i looked up there was an internet fault in the area that lasted 14 hurs outage. (Virgin Media) and never had problems before)

I have just been to location and some were just ticking over/not mining, some where totally dead so i checked main 13a fuses and they had blown?

I replaced them/tried new leads and had 3 go BANG when the PSU's blew?

I now have 2 miners that i am running, but both are just ticking over and getting tuner failed, there is not any voltage being displayed on monitir screen when it tries to tune either?

Plus sometimes i get this error message -'Hashchain refused to start I2C error', sometimes i do not, plus its random on 2 miners.

All are running BrainsOS+ and are a mixture of cards that i know brains does not like......But i updated them to Brains a few weeks ago and all has seen fine since this outage.

I have brought 5 miners to my location on my network now and i'm fetting the same results??

Any ideas?

I'm running one now at mine at its TUNER FAILED but it did not even display any hashrate/voltage/frequency/asics???

Don't knwo where to start here tbh... But i know Brains does not like mixing control boards/cards and this is what these miners are....

I have older model control bards here and i bet the one i'm thinking that if i fit an old board with old Bitmain FW it would boot up...

Anyone help please....

Thanks
5  Bitcoin / Mining software (miners) / S9 cards only run on older FW? BrainsOS fails on them?? on: October 25, 2022, 08:49:49 PM
Hi

I put together an s9 with an old board and spare cards with old 2017 FW on it and it ran fine for 3 hours, i the upgraded to BrainsOS and it ran again, tuned fine.

I have just returned home 4 hours later and miner is not running, i have tried restarting miner and sometimes one card runs to full Th, sometimes hust Gh and ramps down.

I have tried other psu's, disconnecting cards, running one card (tried disabling card/s in FW settings but this does nothimg imo??).

I did not screenshot or write down the message it gave a TUNER FAILED and the error on each card was somwehere alomg the lines of chips not recognided/renemeratopn or somthing?).

I tried downgrading to older FW but it wull not??

So i found an old card with FW -Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016 and it is npw running runs fine?

I was on the verge of binning/selling these cards as faulty but they are all working/good temps/all asics showning, HW errors fine......

What is going here and i presumed if you upgraded to BrainsOS it removed SSH lock thus allowing you to install older FW.

I have just saved an S9 just by using different the older FW! <akes me wonder what other cards i have binned that would of worked fine on older FW!

Any ideas?

Cheers
6  Bitcoin / Hardware / Advice -What soldering station? Ends melted on x3 hashboards? Replace?? on: October 25, 2022, 12:59:01 PM
Hi

I noticed an S9i miner that was not over locked but has been running at a higher rate since installing brains OS

Just noticed it was off and all the supply wires from PSU had melted/plus the ends?

Plus all x9 connections on all 3 boards are all melted and I have just broken the burnt plastic off for now.

Iíve ordered x50 ends for the hash boards.

Do PSU still powers your and has 12v on the main hex bolts.

1. What solder station/solder/flux/tip cleaner do I need to repair these?

2.  Can you purchase the pre made ends (x10) in total that I can just bolt back on the PSU?

I have an ancient soldering iron and the lead if stuff/short and was not good so looking ti get an Ďall in oneí Halís decent station.

Anyone advise please

Thanks.
7  Bitcoin / Hardware / How reliable is the AntMiner S19 Pro? on: September 24, 2022, 09:07:30 PM
Hi all.

Thinking of purchasing an S19 Pro or similar.

Iím basically wanting to upgrade from my S9s but iím worried about reliability.

Would you say they are better than S9s?

Do they like being turned off and stripped for a monthly clean/blast of compressed air?

I would basically be replacing approx x8 S9s but as you know these are relatively cheap.

I have to clean monthly as my location seems it even with dust prevention measures in place.

Are they Ďbetter builtí than S9s as I think they only have chips/heat sinks on one side of each board.


I also presume the noise levels will be drastically reduced by one S19 to several S9s.

Itís a big investment for me so I need it to last.

Whatís peoples opinions please.

Thanks.
8  Bitcoin / Hardware / Advice -Adding additional 6 pin PCIE outputs on a PC modular Power Supply? on: September 20, 2022, 07:44:16 PM
Hi All

I have a few modular/semi modular PC psu's and was thinking of using the  to pwer some S9 miners with 2 cards. Most of what i have are 1000w or higher.

They will be worthless selling so might be better put to use on some S9s powered with2 cards, so i would need x7 ouputs all together.

I think i could use an existing hard wired PCIE (6 pin or not) to power the control board.

Then on the dedicated high amp PCIE modular ouputs could i not solder on connections and 'share' the load so x2 on each output?

I have only seen x8 to x2 PCIE cables so could i not just splice in and solder another?

If this works i could do a few more miers in thsi set up as it would be low power and quite when set to 700/800w.

Anyone done this or got an opinion on it?

The PSU's will either go to waste tbh.

Pics attached.

https://imgur.com/a/Kdjxb0v


Thanks
9  Bitcoin / Mining support / What speed Internet or bandwidth do i need? How do i check? Swapping ISP? on: September 07, 2022, 08:18:38 AM
Hi All

I currently run x10 S9s @ approx 140-150Th and i'm with Virgin Media 100Mb  Broadband (just done test and it's 97.38 Mb/s, 9.94 Mb/s).

The prices are now ridiculous and they only offer deals to new customers and all my deals/offers are ended and i'm paying x3.5 times what a new customer would get.

I'm looking to swap to Vodaphone Superfast 100 Broadband (as another comparison for the same price as Vodaphone a new customer with Virgin would get 213Mb).

I have to say i have been with Virgin for years and it's been quite reliable but the costs are a rip off imo, i culd be a 'new customer' again after leaving for 1 year and get back a great deal!

How do i know what i need to check? I'm pretty sure my IP Box freezes with my provider set up i pay subs too due to my miners and it's now unusable (Bee movie works perfect but the GUI/interface etc freezes on my provider i pay).

Also when changing i could be left with no internet, could a MiFi sim card unit work temporarily or would it eat too much data?

This is something i have always wondered but have been to scared to change tbh but in these tough times i have no choice....

Thanks
10  Bitcoin / Mining / Liquid Cooled Mining - Has anyone build a simple system with one or two cards ? on: August 30, 2022, 10:21:11 AM
Hi All

I have a few spare cards/control boards that are not used and was thinking of making a simple oil cooled system that has no circulation or a simple cooling system.

It would be just to keep noise down basically, could i not just drop/suspend mining boards in a solution along t=with the PSU (fan removed( plus the control board with 'fan jumpers/simulators)? Or is there now software to do this?

RUB (Really Useful Box's) seem sturdy enough.

Anyone done this?

Cheers.  Smiley
11  Bitcoin / Mining software (miners) / ADVICE -Can not upgrade to s9_Web_Package_(BraiinsOS+) -Cannot Find Signature!!! on: August 03, 2022, 11:05:21 AM
Hi All

I am trying to udate all my miners to the latest Braiins OS+ as i use Slushpool.

I am aware that FW is locked on some models in after 2019 and i have searched and found this tool/guide to unlock but mine in 2018 FW PLUS the link the S9 unlocking tool is not working?

Here -https://bitcointalk.org/index.php?topic=5203992.0

I am only trying to update to genuine (not downgrade) so surely it should work?



I have the following S9 -

Miner Type   Antminer S9
Hostname   antMiner
Model   GNU/Linux
Hardware Version   30.0.1.3
Kernel Version   Linux 3.14.0-xilinx-g16220c3 #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
File System Version   Wed Jul 31 16:18:27 CST 2019
Logic Version   V1.3.58
BMminer Version   2.0.0
Uptime   20
Load Average   0.13, 0.26, 0.19

This is what i am trying to upgrade to- s9_Web_Package_(BraiinsOS+)

Here -

Upgrade from stock firmware to Braiins OS+
Uses web interface of (pre-2019 versions) stock firmware to upgrade. This web package can also be used for batch installation using BTC Tools

-https://braiins.com/os/plus/download

Any ideas on how to proceed?

Thanks
12  Bitcoin / Hardware / Just purchased an S9 Miner off Ebay and it has one heatsink missing? Still Mines on: March 19, 2022, 02:42:14 PM
Hi all

Just purchased another S9 of Ebay and opened it up to check/clean (most screws were loose/been opened) to clean before setting up and mining.

Board 8 has a heatsink totally missing YET it is still hashing ok??

How can this be? I presumed chips were all in series, so if one goes down the rest/all do??

I can provide any pics as requested.

Thanks

https://imgur.com/a/MYFcofS
13  Bitcoin / Hardware / Anyone recommend an ATX powers supply for an Antminer with 1 or 2 cards? on: March 14, 2022, 01:48:43 PM
Hi All

I am looking to run an Antminer S9 with just one or two cards, reduce fan speeds and use a quite ATX style PSU instead of the loud 1600/1800w server type with blaring fans.

I have been searching and i also have a 750w ATX psu at hand but they only have one 6 pin PCIE style connector and a load of other 5v/12v sata connectors i think they are?

Is there an ATX PC style PSU available with 4 or 7 PCIE plugs on it (i will try with one card first so 4 plugs will suffice/1 control board, 3 to hash board).

Does anybody know of one and what wattage  would need for 1 card or 2 cards/fans/controller.

Thanks
14  Bitcoin / Hardware / Advice - What are these extra PCBs/Chips on these S9 boards? on: March 11, 2022, 01:13:33 PM
Hi All

Just purchased an S9 cheap and openend it up to check/clean and found they have added PCB boards?

Never seen these before anywhere on other S9 boards.

Anyone know what they are and why they are there?

Thanks

https://imgur.com/F3Pr7PF

https://imgur.com/ETk5XcR
15  Bitcoin / Hardware wallets / Advice Please - Ledger Live will not accept my password? on: July 28, 2021, 09:43:11 PM
Hi All

Tried to log into LL and it states it's incorrect/reset it etc....Then i would have to add each coin agsin i presume/synch all the networks..

The problem is the password is 100% correct!!

I have tried everything, copy/paste, recover from last accessed (Win10).  cleared cache.....

I have messaged Ledger but WHY has this happened guys?

Is there anything else i could try??

Thanks

16  Bitcoin / Hardware / Antminer Board Cleaning -Anyone had results with an Ultrasonic Cleaner? on: May 13, 2021, 06:45:08 PM
Hi All

I mainly use S9/i's due to price and replacement of hash boards being relatively cheap.

I have had some i put in a pile to sell as they do not work or bring a whole S9 down (constant restarting etc), BUT then i have gone to use them weeks or months later and they are fine??

The ONLY thing i have done is cleaned them with a stiff  brush and them blasted them with contact cleaner.

I'm wondering if anyone has had any success with using an Ultrasonic Cleaner and the relevant fluid?

This 6.5l seems to accommodate a whole hash board plus i suspect the fluid would last a long time if you clean the boards as i explained above.

https://www.ebay.co.uk/itm/154339501013?hash=item23ef59e3d5:g:lHQAAOSwQUFgMgJm

Anyone got any views/opinions on this?

Thanks
17  Bitcoin / Hardware wallets / ADVICE - Selling Fee's when sending from Ledger Nano S ? Sewit/Segwit 2?? on: March 14, 2021, 11:45:45 AM
Hi All

I hold my BTC on a Ledger Nano S and have just sent approx £1000 and i manually adjusted fees to £5 to70 sat/Byte  (it shows  as 70 0.0001176 BTC (71.1 sat/vB) on https://blockstream.info ??)  -I man in NO rush for the transaction hence low fees and i used this link that monitors the current Blockchain traffic/how busy - https://bitcoinfees.earn.com/

Not sure what a vB is, never hears of it, it's always been satoshis per Kb to me from reading up?

I also had a this message -'SEGWIT FEE SAVINGS   This transaction saved 26% on fees by upgrading to SegWit and could save 13% more by fully upgrading to native SegWit-Bech32'

I did some googling and i'm confused, from reading i presumed i was using SegWit as the OLD version was Legacy and everyone updated years ago?

I'm not sure what Segwit-Bech32 is or how i would transfer to that??

How do i make sure i am using either of above to save on fees guys?

Thanks

18  Bitcoin / Mining support / ADVICE-Can disconnect or disable one chip from an S9 Board? Heatsink fallen off! on: January 23, 2021, 02:58:45 PM
Hi All.

I removed my boards from an S9 to clean but dropped one by accident and the heatsink has fallen off. Luckily the chip is still attached to the board.

Is there a way to fix this? Can i just isolate that chip by removing some components or cutting a track? Or is there a way to reattach the heatsink with some form of glue/compound?

Any advice much appreciated as board is only a few weeks old and it seems a waste to lose a whole board from one heatsink that is easily accesible as it's on the corner of the board.

Thanks in advance for replies.
19  Other / Beginners & Help / Advice - What wallet for iphone/ios? Electrum is not supported?? on: January 04, 2021, 01:01:37 PM
Hi All

I use Electrum wallet on my laptop and have a friend that wants to install a wallet on his iphone.

I have read the sticky at the top and it gives this -

Mobile Wallets for iOS

Breadwallet
Breadwalletís combination of simplicity and security has made it the most popular iOS wallet. iPhone users in search of their first Bitcoin wallet should findBreadwallet easy to understand.

BlockStream Green
BlockStream Green is also available in the App Store.

Edge
Edge (formerly Airbitz) is also available in the App Store.

Unstoppable (iOS)
It is easy to use, reliable, secure crypto wallet with focus on privacy. Truly decentralized, works directly with Bitcoin network. Open source, code is publicly available. One of few wallets verified by walletscrutiny.com to be exactly as published code on GitHub. Available on App Store. User-friendly design, non-custodial secure storage, privacy oriented features.


Which one closely resembles Electrum (with a recovery seed and 2fa etc?

Thanks
20  Bitcoin / Pools / ADVICE PLEASE -Which pool is best suited for miners not running 24/7? on: October 29, 2020, 05:00:48 PM
Hi All

I been given x2 S9 miners and have them set up and running on Slushpool BUT it's pay out method means it's hit and miss if i get any returns as i can only run miners for sporadic times approx 13 hours a day.

Can anyone recommend a decent pool that would be more suited to this scenario?

Thanks
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!