Hi guys, not sure where else to post this. I tired Facebook and reddit but with no luck. I purchased a bitcoin 2021 ticket for Miami a few days ago and found out I will not be able to go because of personal reasons. And now, I can't get a refund. Is there anybody that would be interested in the ticket?
Here is the conference. https://b.tc/conference

Hello,
I have a Asrock h110 pro btc+ with 8 AMD GPUs. Im using 6 RX580 and 3 RX5700. The problem I have is that they are not detected by RaveOS or the BIOS. It cannot be the risers because they cannot all be broken. I only get 1 GPU to register when I only connect only one. I tried connecting 2 GPUs and does not work. Only when I connect one. I also tried connecting all of them, and none of them work.
Things I tried.
-Updated BIOS
-Enable 4G encode.
-Set PCIe support to Auto, Gen1, Gen2
-Enable/Disabled onboard graphics.
-Preferred Legacy boot mode
-Disable virtualization.
Here is some pictures of how they are connected and how it shows up on the BIOS.
Thanks
https://drive.google.com/drive/folders/1D7BsnPlTva9fi6LkuZJ7IMiP_ZyosDaZ?usp=sharing

Hello,
I have a Asrock h110 pro btc+ with 8 AMD GPUs. Im using 6 RX580 and 3 RX5700. The problem I have is that they are not detected by RaveOS or the BIOS. It cannot be the risers because they cannot all be broken. I only get 1 GPU to register when I only connect only one. I tried connecting 2 GPUs and does not work. Only when I connect one. I also tried connecting all of them, and none of them work.
Things I tried.
-Updated BIOS
-Enable 4G encode.
-Set PCIe support to Auto, Gen1, Gen2
-Enable/Disabled onboard graphics.
-Preferred Legacy boot mode
-Disable virtualization.
Here is some pictures of how they are connected and how it shows up on the BIOS.
Thanks
https://drive.google.com/drive/folders/1D7BsnPlTva9fi6LkuZJ7IMiP_ZyosDaZ?usp=sharing

Hello,

I recently got all the part for my mining rig but I got a big problem. It just does not turn on. I installed the CPU, RAM, etc. I try to turn it on without any GPUs and it just turns on for a fraction of a second. I thought it was the PSU did not have enough power, but it doest even work without the GPUs. It ONLY works when I unplug the power to the CPU. Here is a parts list

-ASRock H110 Pro BTC+

-Celeron G490 LGA1151

-2x DDR4 2666

-Varago PSU 600W (pic in the folder)

-GPUs (not connected)

I got two of these Varago PSU in case I needed more power, but I cant even turn on the mobo without the GPUs. I even tried connecting both PSUs to the mobo. One to the main power and the processor, and the other PSU to the extra power ports. I also tried to connect one PSU to the main mobo power and the other PSU to the CPU power and same result. Still does the same thing. I tried to look for an answer online but could not find anything. I tried to remove the RAM and put it in again, nothing. Removed the CPU and fan and installed it again, nothing. I am not sure what the problem is. All the components are new. Here is a video showing the problem and a pic of the PSU. https://drive.google.com/drive/folders/1D7BsnPlTva9fi6LkuZJ7IMiP_ZyosDaZ?usp=sharing