At the time of writing this , DIVI( Diviproject) is trading at $0.08454,
I see this project has been in the market since 2017 & has current Mcap of $218 Mil with rank #318

according to this

https://diviresearch.com/

They have two most significant Telecom licensing & Rumored multi year sports league partnership this quarter before EOY.

Are any of you guys into this project and what's your honest take on this project,
will this announcements, partnerships generate positive price action for this coin?

I have been staking DIVI for a while now and hold pretty close to 200k divi currently
The staking rewards are ample enough but it would be great to see the price rise which has been stable for quite a while during the bull run,

They have announcements on line like Mobile wallet launch & T1 listing of the coin, will this have +ve impact on price ??

I think it's still undervalued for what it has to offer.
It's been around for many years and team is very good.
I have been staking and Running Masternode & the rewards are pretty amazing and stable.

But the actual coin price has't risen much in comparison to other coins in the current bull run probably due to lack of exposure or something, but I think soon It's gonna move to crazy numbers.
So I am holding on tight.

Let me know your opinion if anyone is onto DIVI and what you make of this crypto.

So is it still possible to mine Ethereum with RX570's ?
Have some 570's from a year back and quite unknown towards the dag file.

Expert's suggestion needed.


Thanks

I did this

Radeon HD 6950 to HD 6970 Flashing Tools
http://downloads.guru3d.com/Radeon-HD-6950-to-HD-6970-Flashing-Tools-download-2658.html

And now i can't linux or windows, X freezes [[mi] EQ overflowing. The server is probably stuck in an infinite loop] and windows freezes at the windows logo.


Though i can run windows in safe mode, and i can run ubuntu in safe graphics mode.

I ran ati to flash it back, it did nothing.
And atiwinflash can't run in safemode........

[short]

The long story:

So i am running ubuntu 11.04, i had 3 6950 GPU's but couldn't run them stacked -sandwitched- the heat was killing the top card so i ran two GPUs and leaving the third on the box, and ordered the 16x extender and 14 days later -that's yesterday- i got it.

I was kinda shocked that the extender is so fricking short!!!!
Couldn't really get the GPU away from the MOBO, and since the crossfire bridge is short aswell i ended up laying the GPU on it's side...

Anyway i crossfired them and re-initiated X to rebuild the conf file then rebooted.

The third GPU was detected and i ran three instances of phoenix and everything was cool.

After many hours i came back to find only two phoenix instances have 1000+ shares and the other have only 100 shares, and no error messages, and for some reason i can't ctrl+c the bash screen..

Did it again and waited some hours -actually was @ work- and checked it again, same problem.

Note #1: GPU #0 is always fine, GPU #1 is the one doing that, GPU #2 is fine.
Note #2: GPU #1 -second- Won't get flashed, unlike the other GPU's
Note #3: The second -#1- GPU was working fine without adding the third GPU.
Note #4: The GPU's are identical MSI R6950 Twin Frozr III cards.
Note #5: GPU #1 -second- always has the lowest temp, and it is in the bottom position.

TL;DR version:
After added a third GPU the second one won't function properly and it won't mine after a certain time.

Thanks for any help on this.

Ubuntu fresh install

AMD-APP-SDK-v2.4-lnx64
pyopencl-2011.1.2
python-jsonrpc
icd-registration.tgz

and
catalyst11.4


ati-driver-installer-11-4-x86.x86_64.run
fglrx_8.841-0ubuntu1_amd64.deb
fglrx-amdcccle_8.841-0ubuntu1_amd64.deb
fglrx-dev_8.841-0ubuntu1_amd64.deb

It should be working but i get

Code:

Traceback (most recent call last):
  File "./phoenix.py", line 123, in <module>
    miner.start(options)
  File "/phoenix-1.50/Miner.py", line 75, in start
    self.kernel = self.options.makeKernel(KernelInterface(self))
  File "./phoenix.py", line 112, in makeKernel
    self.kernel = kernelModule.MiningKernel(requester)
  File "kernels/poclbm/__init__.py", line 132, in __init__
    platforms = cl.get_platforms()
pyopencl.LogicError: clGetPlatformIDs failed: platform not found khr

Code:

$ ./clinfo  |grep CL_DEVICE_TYPE_GPU
terminate called after throwing an instance of 'cl::Error'
  what():  clGetPlatformIDs

Edit: SOLVED

I had the wrong version of icd-registration.tgz extracted to /etc
I extracted the one that came with the AMD-APP-SDK-v2.4-lnx64.tgz and it worked.
 

[0]

Two GPU's temp just go 90+ within minutes of mining, and the other one is almost normal.

They are all MSI 6950 Twin Frozr III

I haven't done any overclocking or anything, default win7 i got with the PC.

While mining:
GPU1 temp:93
GPU2 temp:62
GPU3 temp:86


Without mining:
GPU1 temp:54
GPU1 temp:43
GPU1 temp:54



____________________________________
I noticed something while using phoenix mining software.

When i run with DEVICE=0 the GPU #1 temp goes up.
When i run with DEVICE=1 the GPU #3 temp goes up.
When i run with DEVICE=2 the GPU #2 temp goes up.

Is this normal?

<--- knows nothing about hardware.
____________________________________

And here is the setup (which i don't dare to touch)
http://i53.tinypic.com/25uo1s4.jpg


Is it a configuration thing? or this is normal.

And what's the red line the temp shouldn't go over? 100? 70?

Another little question: What do i use to see the temperature of the CPU?

I searched and got a program but it doesn't support my Sempron140.

I know the board has those answers some where but i looked and searched.

thanks