someone using the wkniqht account is trying to scam people out of Bitcoin. Please ban the account and the ip address.

I have a for sale post that they are PM'ing buyers.

Since I am on a few Rental places I figure this is a good place to allow people to leave feedback on my gear.

I have bought and sold a few things on this site. Also renting our a lot of my farm. Enjoy

Thanks to the ease of use at MiningRigRentals.com I decided to add my entire Mining farm.

10.2 MH/s SCrypt and 4 TH/s SHA-256

The 10.2 MH/s SCrypt units are broken down

Arig0 [2.5MH/s ±5% avg] - https://www.miningrigrentals.com/rigs/652
Brig0 [2.55MH/s ±5% avg] - https://www.miningrigrentals.com/rigs/653
Crig0 [2.7MH/s ±5% avg] - https://www.miningrigrentals.com/rigs/650
Drig0 [2.5MH/s ±5% avg] - https://www.miningrigrentals.com/rigs/651

* Speed is based on CGMiner reporting for avg of the last 15 mins.

4 TH/s SHA-256 units are broken down.

Antminer1 [190GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/654
Antminer2 [175GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/655
Antminer3 [190GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/656
Antminer4 [200GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/667
Antminer5 [200GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/668
Antminer6 [175GH/s ±5% avg] -
Antminer7 [175GH/s ±5% avg] -
Antminer8 [190GH/s ±5% avg] -
Antminer9 [190GH/s ±5% avg] -
Antminer10 [190GH/s ±5% avg] - Disabled Until others rented
Antminer11 [190GH/s ±5% avg] - Disabled Until others rented
Antminer12 [190GH/s ±5% avg] - Disabled Until others rented
Antminer13 [190GH/s ±5% avg] - Disabled Until others rented
Antminer14 [190GH/s ±5% avg] - Disabled Until others rented
Antminer15 [190GH/s ±5% avg] - Disabled Until others rented
Antminer16 [200GH/s ±5% avg] - Disabled Until others rented
Antminer17 [200GH/s ±5% avg] - Disabled Until others rented
Antminer18 [195GH/s ±5% avg] - Disabled Until others rented
Antminer19 [195GH/s ±5% avg] - Disabled Until others rented
Antminer20 [195GH/s ±5% avg] - Disabled Until others rented
Avalon1 [83GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/688
Avalon2 [84GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/689
Avalon3 [83GH/s ±5% avg] - https://www.miningrigrentals.com/rigs/690/

All units are running in a Climate controlled environment. Multiple network connections.

If power is lost or mining is lost due to a VERY rare outage. I will credit mining time lost plus 1 hour.

Any questions or concerns you can contact me or through the website.

[July 13, 2014]

In Stock July 13, 2014 and Ready to ship next business day.

I have 15 0 Units up for sale. These Antminer S1's will come with 1 700w or 750w Dell PSU each unit. Ready to run. Power supply wires screw right into the antminer

Current Price is BTC0.23 Per Unit. Shipped in the United States. Shipping comes with Chicago Suburbs. Cash in hand purchases are fine also. I will ship only to the United States. I will be shipping USPS 2-3 Shipment. Shipped 24 hours after payment.





Note: I am not selling without PSU's. They are all converted to power up these units.

Note: There is no discount for buying multiple units. I am packing them up in a box Antminer/PSU together and shipped out.

Note: These are ready to run units. If you would like to have a certain IP address assigned. Pool assigned. Let me know and I will gladly enter this information so all you need to do is plug in, hook to a network and go.

Note: The PSU's are either 700W or 750W. I bought in different batches.

 

I have hardware for sale on http://www.btcmu.info/shop/

All Units are used and in working order. Stock QTY is listed.

http://www.btcmu.info/product/avalon-asic-72-ghs-batch-2/

http://www.btcmu.info/product/butterflylabs-mini-rig/

http://www.btcmu.info/product/butterflylabs-single-60-ghs/

Since I am being asked again. I figured I would post up my nodes.

First your Frontend Software (This is the front page of your pool)

Simplecoin 5.0
https://github.com/simplecoin/simplecoin

MMCFE (LiteCoin based)
https://github.com/Greedi/mmcFE

Then your backend Software. (This is your mining software people will connect too)
https://github.com/ArtForz/pushpool

Need help installing Pushpoold?
https://bitcointalk.org/index.php?topic=10321.0

This is not a easy task.. running a pool will take a lot of work and custom code.. IT IS NOT TURN KEY AND GO.

I suggest using P2POOL software for anyone. A few people have asked what software they can run for private servers. Just use P2POOL. Below is a linked to a great How-To.

https://bitcointalk.org/index.php?topic=62842.0

http://www.btcmu.info/pools/160-avalon-update-march-1st.html

(From the Newsletter)

Clear for take off, abide a week late.

Deadline has arrived so an update is in order, earlier this week the shipping problem is more or less solved and we are gearing up to dispatch the units, due to the week of delay from before compounded with lingering issues with the recovery from CNY the outlook for shipping time-frames are the following:

Starting from next Monday, units will be en route to their country of destination and tracking numbers will follow maybe 2~3 days after (it is at this point onward which you can expect an email from us with the tracking information), we expect this process to continue to the 10th of March until all the units have been shipped out, if all is well people will get their units in-hand in the middle of March.

 
Trade-In Situation
After much thought, we believe we have figured out the best system for Trade-Ins that will allow people to continue to mine with their FPGA as long as possible yet still able to get their ASIC on the second batch on time. The process will work as follows:

A week before batch #2 is ready to ship, we will make an announcement to those who wish to trade-in their last generation units to sent in their units, once we receive the units a custom order will be made for you to pay the difference depending on what you have trade-in, remember 1 trade-in discount/coupon is allowed per 1 Avalon unit. For clarification the shipping priority is as such:

Sorted from Highest to Lowest.

Developers - e.g. bitcoin core dev and other bitcoin contributor we feel deserve this treatment.
Trade-Ins/Old Customers - your unit will ship soon as we receive the FPGA and you've paid the difference.
Regular Batch #2 Customers - Unfortunately you are not special.
 
Other Fun News
This scheduled newsletter had failed because we surpassed the free 2000 MailChimp quota and manual action was required.
Christmas comes early this year. The present we got was the BFL March 1st bet earnings.
Looking back, it was not terribly surprising that failure and delay comes from the only thing not taken cared in-house, Shipping.
Lessons learned. Batch #2 process will have improvements, minor design adjustments and other goodies.

[ONLY]

Looking to upgrade your poor performing e-cigarette? Looking to have something different from everyone else? Its time to pickup a Thag Built CHUCK. If you have been converted over to e-cigarette's and have been doing your research. Chucks have been one of the best selling custom made units around. Now accepting Bitcoin through this forum ONLY. Please PM me for Orders.

All Colors are listed here with pictures.
http://thagbuilt.com/color-options/

Custom Graphics for customers.
http://thagbuilt.com/custom-graphics/


1 CHUCK Shipped anywhere in US
1 CHUCK Shipped anywhere in Canada
1 CHUCK Shipped International.
2 CHUCKS and Shipped anywhere in the US

Accessories

Adapter Kit 510 to 801/901 with air channel for use with Cartomizers – add to existing order only
Adapter Kit 510 to 801/901 with air channel for use with Cartomizers. Includes US shipping

Cough, Cough, Wink, Wink… Expedited Production  

Battery and atomizer are NOT included.

CHUCK uses an 18650 (3.7v) battery and will typically last 3-4 days between battery swaps.
I tend to swap mine every 2 days just for optimal performance.
(2) 3.0 volt batteries can also be used for a 6 volt option. CR123′s will work as-is.

LITTLE CHUCK uses an 18350 or 16340 (3.7v) battery and lasts an entire day.

For those submitting custom graphics, the dimensions of the CHUCK are 2.85″ x 4.5″ and the dimensions of the LITTLE CHUCK are 2.85″ x 3″. Graphics may be submitted in any high-resolution format.

For those who are unsure which atomizer to order, there is a picture of common atomizers on the accessories page.
http://thagbuilt.com/accessories/

Every unit is hand-built, assembled and tested before shipping.
I will be taking orders and filling them on a first-come, first-served basis.
Unless of course you bribe me with a handsome sum of money.

Orders are placed into production once payment is received.

OFFICIAL DISCLAIMER:
This device houses a battery. Batteries can and have “vented” in the past. It is a very rare occurrence especially with PROTECTED BATTERIES, which I highly recommend, however the possibility is there. While it is of no relevance to the device they are housed in, none the less… here it is. Thag Built assumes NO responsibility for any personal injury, property damage or hurt feelings resulting from The CHUCK. By making payment, you are acknowledging this disclaimer and assume full responsibility and all the risks associated.

More common risks of CHUCK ownership are:

Being instantly elevated to a level of “coolness” never before imagined.
Being chased by beautiful models (male & female) who are madly in love with you & your CHUCK.
Constant nagging from your friends & family to borrow your CHUCK. (This is not recommended as they are seldom returned).
Being stared upon and ogled by jealous onlookers.

If you are prepared for this…. by all means, order away!

Any questions please contact me here.

More pictures and a poor quality video.. but a video has been shown.

https://bitcoinfoundation.org/blog/?p=112

I am selling Hashpower leases for Paypal payments. 5% mark up plus Paypal fee's (about 1.8%).

You are purchasing a service. This service is provided through Hashpower and myself.

Here is how it works. You send me your worker login/password and I will send the shares to that location. (Must be a Hashpower listed pool). Pricing is based on current lowest PPS price.

To purchase please contact me via PM. You will be invoiced for Computer processing service rental. Once paid I will then send the services to the pool that you request.

Here is the current pricing. Pricing is good for 24 hours from this time/date stamp or next update. 10/24/2012 12:00pm Central

50,000 share lease. $11.20
100,000 share lease. $22.39
250,000 share lease. $55.96

Hashpower, you've got it, you want to buy it, we are here for you!
Introducing the fair-value bitcoin share marketplace!
Buy Shares

Buy shares at a competitve and fair market price with a competitive market demand. Take advantage of the large hashrates our workers have to offer.
Sell Shares

Sell your hashpower to the public at great rates. Prices are based on market demand, not on some arbitrary equation. No more guessing the price to set your workers at. Always get the best price! No more hassle!
Manage Your Hashpower

With our interface, you can manage your workers from anywhere in the world! You can prioritize pools, watch real-time stats, and buy or sell your shares seamlessly without ever having to take your workers down.

 
Visit http://www.hashpower.com
or stop in the irc channel on freenode #hashpower

Just like it says. Selling 100k shares at 1.92 btc. 200+ gh/s on demand. You click when ready to go!

Larger shares can be purchased also. PST

Please send private messages only.

[Top Ten Pools]

  Top Ten Pools
    
    

1.50BTC	4501 GH/s
2.BTC Guild	4073 GH/s
3.Deepbit	3380 GH/s
4.Slush's	2466 GH/s
5.BitMinter	1998 GH/s
6.EclipseMC	1625 GH/s
7.OZCoin	958 GH/s
8.MT. Red	686 GH/s
9.LTZod	415 GH/s
10.P2Pool	362 GH/s

   
    Courtesy of organofcorti weekly pool watch Updated 11/18/2012
    
    
    Current PPS Rates
    
    

1.Mt. Red	0.0000148422250378
2.BTCOxygen	0.00001454538053712080
3.Bitparking	0.00001447
4.50BTC	0.00001439
5.OzCoin	0.00001425
6.ABC Pool	0.0000141297982361
7.BTC Guild	0.00001410011437419091
8.EclipseMC	0.000014100113785984
9.NMCBit	0.0000138528423169
10.Deepbit	0.00001335800253409
11.HHTT	0.00001231

   
    Current Difficulty as of 11/22/2012 3368767.14053294
    
    All Information Can be found on http://www.btcmu.info/
    Neighborhood Pool Watch http://organofcorti.blogspot.com/

Anyone know how long it takes for Support to email you back? I have a defective lower fan that I have on one of my singles I just received. Waited 2 months for these things and I get a fan that goes out on one. Was hoping to get an email back today.

Anyone know long long it takes normally?

Brand new replacement I just got from Diamond Media yesterday. Radeon HD 7970. This was a replacement for a 5970 I had to send in for warranty and they send me this as they cant get 5970's anymore.

Price is $400 US plus shipping (Shipping from the US). I will accept BTC or Paypal as payment.

Please private message me if your interested.

I wanted to just put this out here for peoples backup pools. I couldnt find the orignal post so here is a link to it

Thanks to ThiagoCMC

https://bitcointalk.org/index.php?topic=62842.0

Since I have been asked many many times I am going to post where to get software to run a pool

First your Frontend Software

Simplecoin 5.0
https://github.com/simplecoin/simplecoin

Then your backend Software.
https://github.com/ArtForz/pushpool

Need help installing Pushpoold?
https://bitcointalk.org/index.php?topic=10321.0

This is not a easy task.. running a pool will take a lot of work and custom code.. IT IS NOT TURN KEY AND GO.

Why did I not post up MMCFE?

Because MMCFE is BROKEN.. anyone mining on a MMCFE pool is at risk of blocks not being reported. In fact the only Litecoin MMCFE pool i know that has fixed this is g2x3k. (Pool-X)

Good luck running your pool Its a thankless job.

NOTICE: Sold to David_Benz.



Units are sold.

[P2P Pool]

First Find yourself a Litecoin Pool.

Elitist Jerks = 3% Fee PPS http://www.ejpool.info
Ozcoin = 2% Fee DGM https://lc.ozcoin.net
Litecoinpool.org = 4% Fee PPS http://litecoinpool.org
Pool-X = 2% Fee PPLNS http://pool-x.eu


P2P Pool HowTo: https://bitcointalk.org/index.php?topic=62842.0

For more information about Litecoin Pools. Visit
https://github.com/coblee/litecoin/wiki/Comparison-of-mining-pools


Minerd using scrypt for litecoin [Windows/ or Linux]

Note : 64 Bit has been known to increase speeds

Replace pool.ejpool.info:9332 with any pool that you have chosen in the examples below


Windows:
extract https://github.com/pooler/cpuminer/downloads into a folder end edit "MINE 2 THREADS.bat"

Code:

@echo on
ECHO "Example Litecoin miner startup file (1 thread, localhost, set your own user and password)"
ECHO.

minerd.exe --algo scrypt --s 6 --threads 4 --url http://pool.ejpool.info:9332 --userpass username.1:password

put in your worker details you command for starting minerd.exe shuld look sumthing like (depending on your machine):

Code:

minerd.exe --url http://pool.ejpool.info:9332 --userpass user:password --threads 2

(replace user and password with details from "My Workers" and --threads with amount of cpu cores you wish to use)

Its working when you see the following.
[2011-10-16 20:27:39] thread 1: 84652 hashes, 3.34 khash/sec
[2011-10-16 20:27:44] thread 1: 6717 hashes, 3.43 khash/sec
[2011-10-16 20:27:44] PROOF OF WORK RESULT: true (yay!!!)

Linux (Ubuntu):

Code:

sudo apt-get install make automake build-essential libcurl4-openssl-dev git libdb4.8++-dev
git clone git://github.com/pooler/cpuminer.git
cd cpuminer
./autogen.sh
./configure CFLAGS="-O3"
make

Code:

./minerd --url http://pool.ejpool.info:9332 --userpass user:password --threads 2

(replace user and password with details from "My Workers" and --threads with amount of cpu cores you wish to use)

Linux (CentOS):

Code:

sudo yum -y groupinstall "Development Tools"
sudo yum -y install git libcurl-devel python-devel screen rsync

git clone git://github.com/pooler/cpuminer.git
cd cpuminer
./autogen.sh
./configure CFLAGS="-O3"
make

Code:

./minerd --url https://pool.ejpool.info:9332 --userpass user:password --threads 2

(replace user and password with details from "My Workers" and --threads N with amount of cpu cores you wish to use)

If you have issues with Ubuntu or CentOS please come into our IRC channel and we will be more than happy to help you.

MAC(OSX): Binaries can be downloaded here.
https://github.com/pooler/cpuminer/downloads


Thanks to Pooler for all the great work he has done with cpuminer!

IF you feel anything needs to be added or changed in this short little how to.. please let me know.

NOTE: If you get missing libcurl for 64 bit linux. Here is how to resolve it. Make sure to rerun ./autogen.sh after you install libcurl

Code:

cd /root
wget http://curl.haxx.se/download/curl-7.24.0.tar.gz
gzip -d curl-7.24.0.tar.gz
tar -xvf curl-7.24.0.tar
cd curl-7.24.0
./configure
make
make install
cp /root/curl-7.24.0/docs/libcurl/libcurl.m4 /usr/share/aclocal/libcurl.m4
ln -s /usr/local/lib/libcurl.so.4 /lib64/libcurl.so.4

POOL IS CLOSED