I have a computer with one MSI Radeon RX 470 card in it. When it is the primary graphics adapter MSI Afterburner can read the settings and I can overclock the memory. I tried enabling the onboard graphics as well for the primary display thinking the RX 470 would hash faster. But when I did this MSI Afterburner could no longer read the settings from the RX 470 and it thought there were four RX 470 GPUs in the computer, when in fact there is only one, and it could not read any of these phantom cards. But Claymore Dual Miner could still see the one RX 470 and it was hashing. In order for MSI Afterburner to be able to read the card and set the memory clock it has to be enabled in the computer bios as the primary adapter. Is this a limitation of the bios on my motherboard? I was hoping to use the onboard graphics to let the RX 470 only mine coins but without being able to overclock the memory with MSI Afterburner I got the same hashing speeds regardless if it was set to primary adapter or not.

What would be the best way to mod this card for better hashing rates? I see people taking about modding the bios and moving memory straps 1500 to all higher memory frequencies. Is there anything else to be done? When I run MSI Afterburner the voltage is fixed (slider disabled) and everything I have tried to enable it has failed (config file change, etc.). Here is the info from my bios. The card has Samsung memory.

In the 2.0.4 windows installer version when you try to create a new wallet with a BTC Chip (hardware wallet) the program just shuts down. Can never get the wallet created. Chip already is initialized with a seed and PIN.

Need 10 GPB gift card code for use on Amazon.co.uk. Willing to pay 60% value in btc. Please PM if you have legit code for sale.

If a Trezor has two or more accounts (not addresses) can Multibit access all the accounts or only the first one?

When I try to send btc Multibit is setting the fee too low. It is setting it to 0.00001". When the minimum fee should be no less than "0.0001". This lower than desired by network fee is resulting in txs taking many. many blocks to get mined. The donation I sent to Multbit took nine blocks to get mined due to this low fee. There is no way for the user to fix this fee. Please look into this and set the correct minimum fee so txs will propogate and be mined within a block or two. Thanks.

First off I would like the ability for Mulibit to remember the XPUB (master public key) so transactions can be viewed without unlocking the Trezor device.

Then bases on having the XPUB saved, I would like to be able to view all public addresses used and their current balance. I would like to see the change addresses and their balances also. I believe this would be a useful and popular feature.

My last concern is how MultiBit HD 0.0.6beta is unlocking the Trezor and leaving it unlocked until you exit the browser or unplug the Trezor. This means if I leave my Trezor plugged in after unlocking it, and I step away from my computer, someone could send a transaction by pushing confirmation keys on the Trezor twice, without the need to enter my PIN. I would like the option of having Multibit relock the Trezor each and every time it uses the PIN to unlock the device. After starting Trezor PIN is entered to unencrypt the wallet file using the Trezor device but is stays unlocked as long as it remains connected to the computer and Multibit is running. I would like the option of having the Trezor relocked and having to enter the PIN for every send transaction I perform. In this way nobody can send fund using Multibit and My Trezor if I left it on my computer unlocked out of stupidity.

Also, the ability to change tx fees. I sent $2.00 to your Mulitbit donation address and the tx fee the program used was only. 0.00001 BTC and it took nine blocks for the tx to get mined and confirmed. If I had the ability I would have changed the tx fee to 0.0001 for more normal processing the expected timeframe.

I really like having an alternative to the Trezor and BWALLET online wallet sites. This implementation is something that I have wanted for a while now.

Thank you.

Any people in Thailand interested in getting into a group buy to buy a five pack of U3 Batch 3 units? Let me know and see if we can get something together fast to grab a five pack. Cost with shipping would be around $52 each.

I have 6 coupons good for $400 off the Bitmain S4 units. If you need these please make an offer by PM. Also have a couple $50 off S3+ coupons if anyone is interested. Thanks.

Other forum members were nice enough to send me S3 coupons. I have three left I am giving away. Please PM me with how many of the coupons you want and your bitmain ID. The coupons are only good the main bitmain site from China, not the USA site.  The coupons are valid until November 13, 2014 and one coupon can be used per Antminer purchased. Bitamain requires a minimum purchase of two Antminers.

$50 Amazon Gift Card. Tx can be escrowed if buyer prefers. Make offer in BTC or a huge amount of DGB. Card has never been opened to expose it's gift code. $50 value on Amazon.com card.

I can provide unlock codes (Network Unlock:NCK and Service Provide Unlock:SPCK) for LG phones (some older models have NCK unlock only). I will provide them for any IMEI for 0.015 BTC. If someone wants escrow from reputable member I am open to that also. Please note: No unlock codes for Verizon, Sprint or Tracphone (including Straight Talk). All others okay except some South American providers. If no unlock code available for IMEI I will refund the BTC. If code does not work (video proof) I will refund the BTC. Please PM me if interested. We have codes for 99.9% of eligible LG phones.

Make offer by PM in BTC please.