Bitcoin Forum
September 22, 2020, 08:34:00 AM *
News: Latest Bitcoin Core release: 0.20.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1] 2 »
1  Economy / Collectibles / [ENDED] 2015 Denarium Brass Custom Value (loaded with 0.01 BTC) + Empty on: May 09, 2018, 08:35:13 PM

Up for auction is a 2015 Denarium Brass Custom Value (loaded with 0.01 BTC) + Empty Coin set which come in their original cards.  Both are brand new and only the Custom Value coin is loaded.  I don't see these show up often for sale, the balance (includes all forks) of the Custom Value coin can be verified here: https://www.walletexplorer.com/address/1NoAWXHoqjhZVSHzF7Cc3rsFWNqcPDGeZ

Starting bid: 0.01BTC
Min. bid increment: 0.001BTC

Shipping: free

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Payment is expected within 2 days of auctions end unless agreed upon otherwise.  I have the right to deny a deal with any user I feel is too new / un-trustworty.  Thanks for your understanding.

Ends: May 18th, 2018 @ 7:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
2  Economy / Collectibles / [ENDED] 2016 Ometeotl + Quetzalcoatl Full 6 Coin Set #16 on: April 08, 2018, 10:16:53 PM

Up for auction is a rare Ometeotl + Quetzalcoatl Full 6 Coin Set, all serial #16 which is low in the series.  The set comes with accompanying holograms and certificates, I'm not sure if this set is an error or not but I have 2 certs for the silver plated + 2 certs for the gold plated which I found odd and all 8 certificates will be included.  Have fun and happy bidding!   Smiley


Starting bid: 0.01BTC
Min. bid increment: 0.001BTC

Shipping: free

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Payment is expected within 2 days of auctions end unless agreed upon otherwise.  I have the right to deny a deal with any user I feel is too new / un-trustworty.  Thanks for your understanding.

Ends: April 13th, 2018 @ 7:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
3  Economy / Collectibles / [ENDED] NastyFans NastyPenny - 1 of 10 Made - RARE on: March 17, 2018, 11:19:33 AM

Up for auction is a very rare Copper NastyFans NastyPenny which was a hybrid coin created from a 2016 DAVE Bitcoin Penny DIY.  Only 10 of these were made and per the wiki (https://wiki.coin.community/wiki/NastyFans_NastyPenny) they are supposedly loaded with 0.01BTC each.  Have fun and happy bidding!   Smiley


Starting bid: 0.01BTC
Min. bid increment: 0.001BTC

Shipping: free

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Payment is expected within 2 days of auctions end unless agreed upon otherwise.  I have the right to deny a deal with any user I feel is too new / un-trustworty.  Thanks for your understanding.

Ends: March 23rd, 2018 @ 7:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
4  Economy / Goods / [WTB] GoPro Hero 4 Black - Brand New - accessories/batteries/sd cards not needed on: January 08, 2018, 08:49:04 PM
I'm looking to purchase a brand new GoPro Hero 4 Black, please post here or PM if you have one you'd be willing to sell.  I don't need any accessories/batteries/sd cards although I won't turn them down if they're bundled and not affecting the price severely.   Wink

It looks like they run around $150-250 new at the current time looking at ebay prices.

Escrow through Minerjones or another trusted 3rd party.

Thanks!
5  Economy / Collectibles / [ENDED] BitcoinPenny & Cryptopods Collab. Wooden Coins - 10 Total on: December 31, 2017, 11:59:12 PM
Up for auction are 10 wooden coins which were a collaboration between BitcoinPenny & Cryptopods.  These tokens have spectactular hand drawn insect art done by our own forum member, BitcoinPenny.  They were assembled by Digicoinuser and come bearing custom "1Wooden" addresses generated specifically for this project.  There is no private key depression and the wooden surfaces do not adhere a hologram as it would on a metal one, therefore the keys were printed on thicker archival paper.

Ant - Bee - Butterfly - Centipede - Dragonfly
Flea - Ladybug - Mantis - Wasp - Worm




Auction Information
Starting Bid: 0BTC
Minimum Bid Increment: 0.0005BTC
End Time: JANUARY 7th, 2018, 16:00:00 EDT Countdown Timer

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.


Auction bid format examples
all @ 0.0005BTC
or
Ant @ 0.0005BTC
or
Ant, Bee @ 0.0005BTC


Insect Themed Wooden Coins



Shipping
All bids include shipping and international shipping will be handled by minerjones.  If you decide to utilize escrow, a mutually agreed upon party can be selected and the buyer pays any escrow fees.
6  Economy / Collectibles / Digi's Custom Coin Miner Storage Boxes - 1oz, 2oz, Anacs, & Extra Storage! on: September 08, 2017, 02:34:39 AM
Today I'm releasing a new coin storage case, "Digi's Custom Coin Miner" Storage Boxes - a cryptocurrency themed Storage Box!


Coin Miner Storage Boxes

Each one has been printed with my own 3D printing machine and was hand assembled & checked for fitment.  They're a coin storage case I've designed styled around popular Bitcoin miners and they can hold 1oz/2oz coins, along with ANACS/other graded slabs.  Multiple insert designs and two different coin slot sizes allow a wide variety of coins & slabs to be housed in the cases.  These took me quite a bit of time to create and I'm glad to finally bring them to the community.

The default "fan grate" is closed and keeps the box dust free, there's also an open model which allows the fan blade to spin when air is blown over it:


Open Fan Grates (left) vs Closed Fan Grates (right)

Multiple varieties of inserts are available which makes your Storage Box unique to your needs.  The inserts are removable for the ability to change the boxes layout whenever you'd like, please be aware that less desirable inserts (single & double coin/single ANACS) will be printed on demand.  The inserts are sized for generic 1oz & 2oz rounds along with ANACS Slabs.  Before purchasing let me know which insert(s) you would like and based on the below "Insert Sizing Guide", if the 1oz coin slots (if applicable) are to be Small or Regular.


Insert Varieties

Extra Inserts can be purchased with any Storage Box and a free mining themed sticker (for the top) will be provided with every box.  If you do not want an insert for your box, a small amount can be knocked off the price.


Insert Sizing Guide (tested for fitment)
Two insert sizes: Small 1oz Slot Width + Regular 1oz Slot Width

Small 1oz Slot Width:
 - Casascius in custom capsule (loose fit)
 - Cryptoimperator BTC
 - Cryptoimperator DOGE
 - Cryptoimperator Silver
 - Cryptopods
 - Cryptovault
 - F*d BTC
 - Friends of Satoshi
 - Ravenbit
 
Regular 1oz Slot Width:
 - BTCC 1/2 BTC
 - Bitpiece
 - Cas 25BTC in custom capsule
 - Denarium smaller capsules
 - Cryptolator
 - F*d BTC/ETH Silver
 - Game Coins
 - Gox Coins
 - Monero Coins
 - NastyFans 1oz
 - Physibit Poker Chips
 - Satori Coins in Direct Fit 39mm
 - Shibanu DOGE
 - Silk Road Anonymous Mint Tokens
 
2oz Slot Width (same for Small + Regular):
 - BTCC 1 BTC
 - Dignitas Coins 2oz
 - NastyFans 2oz
 - SQL Coins
 
ANACS Slot:
 - PCGS
 - ANACS (some slabs are oversized/bulged in width and may require a little filing of the insert slot nub)


Quantity Available
10 - Closed Fan Grate Storage Box
1 - Open Fan Grate Storage Box

There are ~8 Acrylic Storage Box Tops left and depending on popularity I will decide whether that should be the default box layout going forward.
In the grand scope, they're quite limited with less than 75 total quantity projected until the end of this year.


Price + Shipping
Storage Box w/acrylic see through top =
Storage Box w/standard top =
DIY Storage Box (unassembled) w/standard top =
Extra Inserts = ea.

Shipping is free within the US and depending on your location internationally, there may be a small fee.  


Payment address
PM for payment


Dimensions and Warnings
Approx. dimensions with lid + fans: L: 135.5m, W: 60mm, H: 67.5mm
Approx. interior dimensions: L: 104mm, W: 53mm, H: 60mm

Coin Slot Warning:
Some coins fit much tighter than others, be mindful of the pressure placed on the capsule when inserted.  A few capsules I had required being fully closed before they were able to be inserted as intended.

ANACS Warning:
The ANACS fitment is tight and it should not bend the slot pegs more than 5-10 degrees when fully inserted.  During extensive testing for fitment I found some ANACS slabs (~1/10) were oversized/thicker/bulged and if they're forced into the ANACS holder to have the lid close fully this could cause one of the pegs to break on the insert.  I'd advise checking your slab fitment before fully inserting them, if it's tight you can remedy it by filing/sanding the insert pegs to remove a little bit of material.
7  Economy / Collectibles / [AUCTION] ColdCoin Physical Bitcoin Cold Storage Wallet - Spy Coin - RARE on: June 24, 2017, 03:25:53 AM


Up for auction is a very rare ColdCoin Physical Bitcoin that comes apart and can store a key combo / micro SD card hidden inside.  Few of these ever made it into users hands and they were a really unique design.  It's brand new and was opened once to make sure the item wasn't seized.  This youtube video shows how it works with the provided tool - https://www.youtube.com/watch?v=IHPVztTqg2E

Have fun and happy bidding!    Smiley


Starting bid: 0.01BTC
Min. bid increment: 0.005BTC

Shipping US: free
Shipping not US: 0.005BTC
Payment address: 19hJ9bi2PRgmmGNGXoQwE4wcBPbFLK1whR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Payment is expected within 2 days of auctions end unless agreed upon otherwise.  I have the right to deny a deal with any user I feel is too new / un-trustworty.  Thanks for your understanding.

Ends: June 30th, 2017 @ 7:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
8  Economy / Collectibles / [Interest Check] WTS - Casascius 2013 MS 69 1Ag Set 1BTC, 0.5BTC, 0.1BTC Silver on: May 24, 2017, 10:53:34 PM
Any interest in this mint Casascius 2013 1Ag Set?  Located in the US they're all MS 69 and I'd let them go for the right offer.



I have the right to deny a deal with any user I feel is too new / un-trustworty.  Thanks for your understanding.
9  Economy / Collectibles / [WTS] NaTTyMiNd MASSIVE 5oz Eleutheria 0.999 Silver Wallet #19 Goddess Coin on: May 07, 2017, 12:14:23 AM
For sale here is a NaTTyMiNd 5oz Silver Wallet #19.  You heard right, 5oz - there are very few Silver Crypto coins in 5oz.  Smiley

There were only 50 made, it's unfunded and comes with the COA.  The coins have a Litecoin and Bitcoin address attached to them, a massive 5oz dual wallet - get yours today for a great price!







More photos: http://imgur.com/a/QdiP3


I'm looking to sell it @ 0.5BTC shipped in the US.  International shipping will be determined based upon destination.

Thanks!
10  Economy / Goods / [WTB] Cross & Parker Writing Instruments / Pens on: April 10, 2017, 12:01:51 AM
I'm looking for oldschool Cross & Parker Writing Instruments, preferably unused in the original case / sheath.  If the ink is dried out that will be fine but I would like to have the original ink cartridge.

Some of the Cross pens are gold / silver plated and they will receive a premium, Parker pens are usually cheaper and I'd be more interested in the limited editions or ones with gold + silver plating.

Thanks!
11  Economy / Collectibles / [AUCTION] #1 Microsoul Block Halving Set - 2oz Silver 0.1 BTC ea. ENDED on: April 03, 2017, 04:11:07 AM








Up for auction is the #1 Microsoul Block Halving Set, they are a massive 2oz .999 silver as shown next to the full size Bitcoin dice.  One is completely gold plated and each coin is funded with 0.1 BTC in mint condition from gravitate.  These were approximately 0.4 BTC each when sold and the auction starts at less than half the cost of 1 coin.  I'm also including the 8 Bitcoin dice as an added bonus.  Have fun and happy bidding!    Smiley


Starting bid: 0.35BTC
Min. bid increment: 0.01BTC

Shipping US: free
Shipping not US: 0.005BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Payment is expected within 2 days of auctions end unless agreed upon otherwise.

Ends: April 7th, 2017 @ 9:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
12  Economy / Collectibles / [WTS] PaperSafe 2015 1BTC #2 Satoshi Note Signed Artist Proof w/UV Effects RARE on: March 05, 2017, 11:52:44 AM


Mint condition, in sealed paper protector
This is the second PaperSafe note ever sold publicly from the manufacturer and is #2/10 in the rare Satoshi Note UV Effect Artist Proof Series A Limited.  The UV notes from PaperSafe are some of my favorite items in my collection, this one has only been under UV light for photos and has otherwise lived in long term storage.

It's listed on my emporium at 0.5BTC shipped but I'm willing to let it go for lower if the offer is right.


13  Economy / Collectibles / NastyFans Minted Seat Certificates - Custom Business Card Size Laminated on: January 29, 2017, 08:00:20 AM
Minted Seat Certificate Samples




During the holiday season I created some NastyFans Certificates to accompany Minted Seats as gifts and I was very happy with how they turned out.  I would like to extend this service to the forum and I'm open to create a certificate for any NastyFans Minted Seat coin.  The QR code links to the NastyFans analyzer for that specific address and they can be created for Silver 1oz, 2oz, 5oz, 10oz, Gold Highlighted & Fine Gold Minted Seats.

To create a Certificate for your coin(s) I will need the first 9+ characters of your public key(s).  After that I'll pick up the details from the NastyFans analyzer and confirm the public address, coin type, and # of seats with you before printing.  

The Certificates are one sided and can be made in a 2-sided version with optional customizations.  This project will support NastyFans and 10% of the sale price will be donated to support coin distributions.

Thanks for checking it out!   Smiley



Thanks for all the support with this project, it has come to an end.   Cool
14  Economy / Collectibles / [AUCTION] Bitcoin Penny set w/Doodle - 4 2015, 1 2016 w/hologram - ends Nov 11 on: November 06, 2016, 04:19:43 AM

Up for auction is a nice set of 5 Bitcoin pennies in air-tites, four from 2015 and one from 2016 with hologram.  They do not normally come in air-tites and an uncatalogued doodle is also included with this auction.  There was a little more than 100 hologram style pennies made and the back of the doodle will not be shown unless the winner wants it revealed.  Smiley


Starting bid: 0.02BTC
Bid increments: 0.005BTC

Shipping US: FREE
Shipping not US: 0.005BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes has passed without a bid or an hour of extensions.

Ends: Nov 11th, 2016 @ 7:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
15  Economy / Goods / ★ Digis 3D Printing / Design Service ★ -= Crypto, Logos, Figurines, Custom Parts on: November 06, 2016, 04:00:26 AM
Status: AVAILABLE
Below is an image of some items I've printed and the different colors I have available.







Pac Guy: http://www.thingiverse.com/thing:612888
PacMan Ghost: http://www.thingiverse.com/thing:557527
DOOM Logo: http://www.thingiverse.com/thing:96216
Bitcoin Stand: http://www.thingiverse.com/thing:493516
Venus Box: http://www.thingiverse.com/thing:1559232
Gas Mask Soldier: http://www.thingiverse.com/thing:527918
Finger Digger 2.0: http://www.thingiverse.com/thing:1427173
Pixel Octopus: http://www.thingiverse.com/thing:2216321
Terminator skull: http://www.thingiverse.com/thing:455609
Treefrog: http://www.thingiverse.com/thing:18479
Radioactive Coaster: http://www.thingiverse.com/thing:104845
Velociraptor: http://www.thingiverse.com/thing:1332078
Rocktopus SD Card Holder: http://www.thingiverse.com/thing:1867916
C-Series Cyclops: http://www.thingiverse.com/thing:1373869
Tartaran Shock Trooper: http://www.thingiverse.com/thing:26795
Small Raspberry Pi B+/2/3 Case: http://www.thingiverse.com/thing:559858
Large Raspberry Pi 2/3 Case: http://www.thingiverse.com/thing:1810943
Evil Pumpkin Head: http://www.thingiverse.com/thing:1841957
Fruit Tree: http://www.thingiverse.com/thing:724096
Black skull & crossbones logo - created by me using Photoshop and Simplify3D


To do something different, I'm going to try offering printing/design services on the forum.  If you have an idea for an item that you want to become physical reality, there is a large possibility I can design the part(s) and create the assembly in a 3D printed fashion providing the 3D printed item(s) and/or final .STL files.  It's great for prototyping and offering this service ensures you don't have to possess the CAD skills, 3D printing experience/equipment, or machinery maintenance knowledge.  You get to "design" the item, choose the color, sizing, and quantity - while functioning as a client and receiving status updates throughout the process.

You can choose to have something custom designed or you can find something from thingiverse.com that is already available.  I'm not sure of the price structure yet for custom work, but it will have to be broken down depending on if the item(s) requires CAD time and how many prototypes have to be created.  Most models/parts don't require more than one print, but complex assemblies with mating parts and some models from thingiverse don't play well with the slicer (3D printing software).  I'm currently using Simplify3D which is an extremely well tuned piece of software that rarely has an issue.  The filament (ABS plastic) has a cost but it's quite minimal unless you want a large item printed in multiple quantities.  The printing will be done in one chosen color (your choice) since the machine is the most reliable that way and multi-color prints currently require special .STL files until newer software is available.  My machine has the capability to do dual color prints and I may offer this service in the future.  The printed part(s) can be post-processed using sanding, painting, and various other methods.  I will be offering optional full sanding services as an extra for post-processing and you can paint/seal the item with any method that's out there.

You can rest assured that your idea/design will be safe and won't be posted or shared anywhere without your explicit permission.  I'll be operating on the premise that everyones custom design is private unless otherwise specified.  If you have any question about the process, pricing, or color availability, please feel free to PM me or post on this thread.


Sample Cryptocurrency & Custom designed models
I custom designed the Bitcoin Toast stamp (~3.9in square) and Ethereum Capsule (~4.25in tall assembly) in CAD based off images I saw that other individuals posted on the internet.  The Bitcoin logo stand was downloaded from thingiverse.



Printer information
My printer is an upgraded MakerBot Replicator 2X Clone.  It's finely tuned and can churn out long or complex prints that may take the whole spool of filament.  The maximum size that I can print is 9in W x 6in D x 6in H and my printers maximum resolution is 0.1mm (very fine detail).  The prints come out much better than most other 3D printed items you see on the internet because I have machine knowledge which allows me to tune the settings for greater output quality.  During the process there may be bumps in the road (required maintenance) for which I expect to overcome each one in a timely and effective manner.  I'm operating one printer at the moment so I can only guarantee/take on so much work at a time and will strive to keep this thread updated with my status at the top.


3D Printing general information
3D printing takes time dependent on how large the item is.  Small items can be printed in a matter of minutes/hours, while larger items can take multiple hours or even days.  On thingiverse, there are a few models which aren't really meant to be printed and may not be printer friendly for the 3D Printing I do, FDM (fused deposition modeling).  If you select one of these models for printing I will let you know it isn't something my printer can support.  As you can see from the Terminator skull (has removable CPU housing!) in the sample image, intricate designs are possible while preserving detail and this shouldn't dissuade you from selecting something intricate.

Some items require support structure to be built with the part and this can leave a "mark" where the support is touching the part.  Usually the support is from below and allows the part to build effectively in mid-air, it can be sanded or painted afterwards to post-process these "marks" out.  I utilize ABS filament for printing as it holds up really well to UV rays and high temperatures/heat.  On occasion, ABS warps a minor amount near some of the edges but this usually doesn't affect assembly and is also corrected via post-processing.


Pricing
For extremely large prints, filament payment will be required up front.  Final pricing TBD based on initial requests.  Thigiverse items will be printed at near the cost of filament and there will not be a large premium on the custom design service or printer time.

In the "Sample Cryptocurrency" image above, the Bitcoin Toast Symbol would be approximately $8 shipped, the Ethereum Capsule $18 shipped, and the Bitcoin Stand logo $8 shipped - all US shipping quotes.  International shipping will have to be quoted based on destination.  Special packaging may be required for certain printed parts if they have delicate features.

I will update this post with further information once I iron out all the details and pricing.  Thanks for checking it out and find something you like on http://www.thingiverse.com!  Smiley
16  Economy / Collectibles / [AUCTION] 2012 Casascius 1BTC Brass + 5BTC Nickel Unused on: September 25, 2016, 02:30:47 PM


Up for auction are two unused Casascius coins with keys placed on the back, a 1BTC Brass & 5BTC Nickel.  I placed them in air-tites which stop them from moving around.  They are in a good, uncleaned condition.


Starting bid: 0.01BTC
Min. bid increment: 0.005BTC

Shipping US: free
Shipping not US: 0.005BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Ends: September 30th, 2016 @ 11:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)


Addresses of these coins:
https://casascius.uberbills.com/?address=1CSVPA5tWbQRHExhQ3PmKG6QhhzZpCTLEA
https://casascius.uberbills.com/?address=1Cs9t3hiVktcLZgsUNuZGcqZE8Y17rD9ww
17  Economy / Auctions / [AUCTION] 2012 Casascius 1BTC Brass Redeemed w/Hologram Graded MS 64 on: September 25, 2016, 02:28:07 PM

Up for auction is a Redeemed Graded MS 64 2012 Casascius 1BTC Brass. It has been opened and redeemed with the coin placed back into the slab and held together with a rubber band.  The hologram still shines quite nicely.


Starting bid: 0.02BTC
Min. bid increment: 0.005BTC

Shipping US: free
Shipping not US: 0.005BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Ends: September 30th, 2016 @ 10:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
18  Economy / Collectibles / [AUCTION] 5 Coin Serialized Set of Lealana 0.1BTC Brass Unfunded, 2005-2009 on: September 25, 2016, 02:25:17 PM


Up for auction is a nice serialized set of Lealana 0.1BTC Brass coins.  They are unfunded/marked buyer funded and are great numbers - 2005, 2006, 2007, 2008, & 2009.


Starting bid: 0.05BTC
Min. bid increment: 0.01BTC

Shipping US: free
Shipping not US: 0.005BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

Sniping is allowed, a bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes have passed without a bid or an hour after the scheduled end time.

Ends: September 30th, 2016 @ 9:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
19  Economy / Collectibles / ★ Digis Coin Emporium ★ -= Kialara, Coinographic, Finite By Design =- on: May 29, 2016, 02:55:08 AM
I have a couple items for sale below which I can part with, they are in great condition. 


Kialara Moon Bar 100K Bits #184 w/1oz silver insert
0.12BTC shipped - brand new, has a piece of the moon inside, comes in red sleeve + numbered plastic bag


2017 Finite By Design Ethereum Ether Coin Set DIY .999 Fine Silver #35 Silver + #55 Gold Plated
0.025BTC shipped - all coins are in mint condition and come with hologram


2014 Coinographic 1LTC Silver Plated Graded MS 65
0.02BTC shipped - can't guarantee funding of this coin but it's in great shape


Finite By Design Ethereum Ether Bar Set #13
0.02BTC shipped - all bars are new and come with COA + hologram set, one business card included
 - buy all 4 #13 Finite By Design Bars and get a discount


Finite By Design Bitcoin Bar #13
0.016BTC shipped - bar is new and comes with COA + hologram
 - buy all 4 #13 Finite By Design Bars and get a discount


2016 Finite By Design Satoshi Nakamoto 3 Coin Set #100 MS65
0.016BTC shipped - these were graded early, may grade much better now


Bitcoin Pennies in Airtites (2018 JULIE, 2017 IRIE DIY)
2017 IRIE DIY - $15 / shipped ea., multiple avail
2018 JULIE - $10 / shipped ea., multiple avail
2018 S. Nakamoto - SOLD OUT
2016 DAVE DIY - SOLD OUT




Payment address
1GDY5UtF7NYByfN8uBcRLNzHvyhHF53XaJ

Please add ~0.001BTC to the price for international shipping and discounts are available for combined purchases.

If you decide to utilize escrow, a mutually agreed upon party can be selected and the buyer pays any escrow fees.


This thread will be constantly updating, stay tuned!   Smiley


SOLD
MS 68 NastyFans One Seat - 1oz .999 Fine Gilted Silver photos: http://imgur.com/a/Ap9XZ
Luckybit Copper #20 DIY photos: http://imgur.com/a/RSXSW
PF 69 Supernet Unity 1oz .999 Silver #75 photos: https://imgur.com/a/rbf3L
Unobtanium UNO Bar #80 Silver Plated photo: https://i.imgur.com/vVFoRLm.jpg
SQL Series 2 Copper Coin #135 photo: https://i.imgur.com/IfnG5tE.jpg
2015 Shibanu 50K Doge DIY photos: http://imgur.com/a/68irW
20  Economy / Auctions / [AUCTION] Sol Noctis Silver Coin Graded MS 67 2014! on: May 21, 2016, 04:11:59 AM

(images are from the coin you are bidding on Wink)

Up for auction is a very nice graded Sol Noctis silver coin.


Starting bid: 0.01BTC
Bid increments: 0.01BTC

Shipping US: 0.01BTC
Shipping not US: 0.02BTC
Payment address: 1FpF3yguQVsKGVVdA8GRP5fYzEp8yiH2PR

A bid in the final minute will extend the auction by 10 minutes.  After that, another bid will extend it again and it will end when 10 minutes has passed without a bid or an hour of extensions.

Ends: May 27th, 2016 @ 10:00:00 PM PDT (http://www.timeanddate.com/worldclock/usa/los-angeles)
Pages: [1] 2 »
Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!