My motherboard requires 2 molex be connected for 13 gpus.
I'm using a server grade psu in conjunction with 160w pico power. The pico power has 22 awg wire which has 1 molex attached already.
My first thought was to add another molex to the pico power. However, based on @philipma1957 past experience, the pico may not be able to handle the extra (second molex) power being drawn by the board. It could melt the pico!
The current thinking is to add a molex on one of the lines coming from the server psu. But, since the server psu is 12v only, I will leave out the 5v which is usually used with a 4 pin molex.
Will this be problematic?
Thanks to @philipma1957 for helping thus far.