solved

[What you get:]

Hello Everyone,
i wanted to try something new and came now up with the following idea:

What you get:
The possibility to get the fastest and cheapest Gridseeds on the market probably remanufactured with best possible quality.
Each Unit will hash with at least 494kh/s and some will also be able to go even higher as i use high quality thermal pads to increase stability dramatically.
Also will each units fan ground rail be soldered to the 5V USB GND. That means Silent Fan, with NO EXTRA powerdraw on the 5V USB Rail.
Powerdraw per unit is 18W and for one package 180W.

Bidding:
You bid per package and one package includes ten miner units with an Hashratee of ~5Mh/s.
Bidding style: 1@950€ for example means (one package at the price of 950€).

Highest bid wins all the time. For Example: A says 10@950€ and B says 1@960€ then A will get 9 packages and B will get 1.
Auction will be done in € and biddings will be converted to BTC at the end of Auction.


Shipping:
Preparation time from day of payment till day of sending will be 5 days.
Shipping inside of Germany 6,99€
Shipping inside of EU 16,99€

Payment:
Amount of bidding will be exchanged to Bitcoin and being paid directly after Auction.
Exchange rate: (Kraken BTC/EUR).
If you take more than 6 hours to pay, the bought articels will go to the lower bidder.



Trustratings:
First
Second

Proof of how they work stable > 24h.
(Shows only units with offered modification.)



Summary:
You get silent and stable ~5Mh/s modded with best quality and head for little more OC at 180W
Starting bid: 950€
Lowest increment: 5€

Auction ends at 21.04.2014 at 18:00GMT.

[What i want:]

Hello Everyone,

i wanted to try something new and came now up with the following idea.
What i want:
A little income for my further studies at the university
What you want:
Cheap, stable and fast working Gridseeds
What you get:
The possibility to get the fastest and cheapest Gridseeds on the market probably remanufactured with best possible quality.
Each Unit will hash with at least 494kh/s and some will also be able to go even higher as i use high quality thermal pads to increase stability dramatically.
Also will each units fan ground rail be soldered to the 5V USB GND. That means Silent Fan, with NO EXTRA powerdraw on the 5V USB Rail.

Code:

So in short: 4940kh/s per package, all fans being silent and due to best thermal solution head for overclocking to about 530kh/s.

[/b]


Proof of how they work stable > 24h.
(I only highlighted the Units which i did with the mods i will actually do with the Units offered here.)

[Hallo liebe Forenuser,aufgrund mehrmaliger Nachfrage will ich nun einen Moddingservice von Privat zu Privat anbieten.Ich würde drei Modifikationen durchführen die ich wie folgt benennen werde:]

Hallo liebe Forenuser,

aufgrund mehrmaliger Nachfrage will ich nun einen Moddingservice von Privat zu Privat anbieten.
Ich würde drei Modifikationen durchführen die ich wie folgt benennen werde:

- OC+:

Durch erhöhung eines Vorwiderstandes wird den Chips eine höhere Voltzahl bereitgestellt. Dies lässt ein Übertakten bis 1150mhz (489kh/s) zu.
Wattverbrauch der Einheit liegt dann bei ~ 18 W.

- Silent Fan:

Die -12V Leitung des Lüfters wird über den 5V USB_GND abgeführt. Dadurch fällt bei dem Lüfter nurnoch eine Spannung von ~ 7V an und dieser dreht wesentlich leiser.
Vorteil dieser Lösung gegenüber einem Widerstand oder eine direkte anbindung des Lüfters an die USB Leitung ist, dass bei dieser Methode der USB Port keine weitere Belastung erfährt.
Leider sind die verlöteten Bauteile größentechnisch etwas unausgeglichen, was das Umlöten etwas zeitaufwendig macht.

- Stable Mod:

Ersetzen des Standard Kühlpads durch nichtleitende Wärmeleitpaste, zur Verbesserung der Wärmeabgabe.
Durch die verbesserte Wärmeabgabe bilden die Chips keine Hotspots und arbeiten wesentlich stabiler / effizienter.
Minimiert Hardware Fehler.
[Bild folgt]

Preisvorstellung:
10€ pro OC+
2,5€ pro Silent Mod
1,5€ pro Stable Mod

Akzeptierte Bezahlungsmethoden: Bargeld, Litecoin und Bitcoin.

Danksagung:
Zigs
[folgt]

erledigt

[No pre-order]

Price update, 29.03.2014

Hi miners out there,

I will sell dual-miners from gridseed, the gridseed GC3355. No pre-order. I will sell in-stock. Miners sold will be tested.

You can come and pick it up at anytime.

In Stock:
 > 200 pieces. Proof in the post below

Leistung:
up to 400KHash/s Scrypt, up to 11,25GHash SHA-256
Scrypt-only: 8W
SHA-256-only: 52W
Dual-mode: 60W


1-9  Gridseed 350 khash+ 180€
10+ Gridseed 350 khash+ 167€

1-9  Gridseed 480 khash+ 205€
10+ Gridseed 480 khash+ 199€

Included: USB-cable (1m), DC Plug, powercable.

for every 10 gridseeds you get a 13 port usb hub for 15€. - subject to availability
for 5 Gridseeds you get a PSU + DC adaptercable for 5 units for 15€. - subject to availability
for over 10 Gridseeds you get a 400W PSU (12V, high efficiency) for only 30€. - subject to availability


Only as long as it is in stock.
Buy now and request here: nemercry [at] t-online.de

New shipping prices:
Inside of Germany 6,99€
<7 units Inside of the European Union 16,99€
>7 units Inside of the European Union 21,99€ (on request)
Priority Mail only on request per Mail.

Local Pickup in 70569 Stuttgart possible (Germany).


How to pay?
We only accept bitcoins and litecoin. After 6 confirmations it's yours..
By ordering 10 or more miners the package will be sent the same day. Otherwise it will be sent at least the next morning.

BTC: 1PhC61cnZ3Lsy5BngqsKbsUxWA43ZqzVW3
LTC: LW1DWCo5gio1893B4m7niyrtrkLJz8MRBz

Exchangerates can be seen at:
BTC/EUR @ Kraken.de
LTC/EUR @ Kraken.de


Scam?!
I'm a member of the bitcointalk-community since 2012 and graduated in engineering. I also did transactions through this forum and have a positive trust rating. Just have a look at the pictures, really. We already sold a lot on bitcointalk.


How to order:
Send an email to nemercry [at] t-online.de or write me a PM with the desired amount of gridseeds, payment method and shipping.
Shortly after I will tell you if we still have enough stock and guide you through the payment.
To make this even quicker just reply me your transaction IDs.


Shipping only withing EU and UK

If you have any questions left just PM me or write an email, I will answer quickly.

payment adresses:
BTC: 1PhC61cnZ3Lsy5BngqsKbsUxWA43ZqzVW3
LTC: LW1DWCo5gio1893B4m7niyrtrkLJz8MRBz



In-Stock Proof:

Units Hashing Proof:

I will add a more long term stable proof the following days.
But for now the results are looking very good. Also the soldering is very good. We already achieved 420khash/s with very few HW-errors (negligible).
The applied mod is this one : 2-Pin Bridge mod



Gridseed @ 350kh/s and 850 mhz, Not Modded unit


Gridseed @ 400kh/s and 950 mhz, Modded Unit

Power Draw:
Be aware that this is the overall Powerdraw.
I've got a really messy psu working here it should be around ~82% power efficiency or less.


Gridseed @ 350kh/s and 850 mhz, Not Modded unit
Overall powerdraw: 9,8W (8,036W Gridseed device, 1,764W PSU)


Gridseed @ 400kh/s and 950 mhz, Modded Unit
Overall powerdraw: 11,1W (9,102W Gridseed device, 1,998W PSU)

Without fans the power consumption will go down further (roughly 2W, updates will follow) - a fan in litecoin-only-mode is not needed (safe).

Tax? Customs?
Order within the EU or UK and there are no taxes/custom duties or whatsoever to be paid.

Things what will follow shortly:
- Adding Payment method.
- More detailed explanation of different things
- 420khash proof
- usb cables

--- done ----

Hello Guyz and Girlz,

i'z want to setup a doge Pool.
I aim it to be the much wow, most amaze, very support and main profit pool to be.
(*serious mode on*)


I want to open a Mining Pool for the new Dogecoin. The goal of this is to provide a stable and efficient mining pool. Server hardware for this project does exist and i know of some mining software, to set up things, for Bitcoin for example. I for myself really do like the Eloipool software for example. But when it comes to the scrypt coins i do not know much about.
I do have certain programming skills and can do some for my own, but i do not want to create the wheel new.
I also do know much about Linux and i am fully able to set up them in a safe way to hgihly reduce the probability of being hacked or ddosed.


Is there any software you could provide me with or which you could advise to use for me ? Have you probably done something like that and can give me a little tutorial on how to go with something like that ?

My favour would be to take the Eloipool and modifiy it to work with the Dogecoin. But as i did not program the pool software my very own it would possibly take a large time to do so. Which i prefer to use on making it more safe and reliable instead of building the basics.

I really do appreciate your help a lot.

Regards

Hello,


i own one share at the following Groupbuy of some Terraminer IV Devices.
The Share is from the first device and is 67GH/s per Share.
Due to the reason that i am in need of money right now, i am willing to sell it for the same price as the current buy in price for the third device at 1.1BTC.

GB: https://bitcointalk.org/index.php?topic=278460.0

Payment adress: 13niA2BjbXg3p3g6YvUy1RCm79AwB9tzgc


Regards

SOLD

Hello all,

I am looking for one Saturn and/or one Jupiter to buy.
It needs to be inside of the EU and will be done through an Escrow.

Saturn: 16BTC + Shipping
Jupiter: 30BTC + Shipping

On negotiation basis.

Please write me a short PM when you got some to sell.
Regards

SOLD

[I'm auctioning 8 Shares of my Metabank Groupbuy from pidobirs GB. Youre bidding on all 8 shares.]

I'm auctioning 8 Shares of my Metabank Groupbuy from pidobirs GB. Youre bidding on all 8 shares.
https://bitcointalk.org/index.php?topic=224332.0

Each shares entitles you 5GH/s makes in sum 40GH/s.
The official document which proves my ownership is here:
https://docs.google.com/spreadsheet/ccc?key=0AkwpY6JRicSddG96ZW9sbzhoMFoyT0xLWFVjOFR5LWc#gid=2

Metabank already sent out devices and announced to ship larger quantities by the end of the week.

After the auction you will pay the amount to 13niA2BjbXg3p3g6YvUy1RCm79AwB9tzgc and post it officially in the upper GB thread.
Pidobir will then grant you the shares, when the shares are transfered.


Auction ends on 13/03/21 19:00 UTC
Timer removed. End time: 2013-09-21+19:00:00UTC

Auction starts at 8 @ 8.5 BTC

Min bid increment: 0.05 BTC

Hallo suche GPU Mining rig im Bereich von 1000 - 2000 Mh/s.
Falls einer diese abgeben möchte, bitte melden.
Sollte ein gut funktionierendes Rig sein, was per Post versendet werden kann.

Gruß