Why is search disabled I can't search for anything now.  When will it be fixed?

Bitmain release date for any L3+ are now March 21st.  4 damn months. So they get you to buy the miner and they will mine with them for 4 months killing the value than release just as they did with D3.  Even worse they only take BCH so forcing a pump into BCH.  This company needs competition that is real because they killed D3 in the 3 months it took to get the D3 they were mining with them so difficutly rocketed up and we get no ROI on them!  Barely make anything off them.

This company has gotten to be crooked scammers that will get the miners to buy the equipment so they can mine the value out of the coin than dump them on the miners worthless!

BEWARE their pre-orders are NO GOOD!   I got my confirmation Friday so had bank to wire money Monday!  Well I saw on Twitter that they are sold out!  Thinking my pre-order should still be good contacted them by Skype and was told to keep the money!  

Basically they DO NOT HONOR pre-orders!  If I had not checked I would of been out over $1500!   What a SCAM!  I have to cancel with bank first thing in morning!

Wonders how many people have gotten screwed by them?

I have (2) Antminer D3 arriving on the November 20th batch shipment.  Asking $1300/ea.  Willing to use Escrow of if you are in the Central Florida area can meet in person. 

I have a Baikal Giant+ 2000 MH/s.

My asking price is $1500.00 or reasonable offer.  I am open to using Escrow or a reasonable trade in mining hardware.

I paid $2800 for my miner and I have a bad hash board on this unit.  The miner will stop mining or responding from 10 hours to 24 hours!  The board the PI came on would not work on the left hand side and finally I got it working by moving the PI board to the other red hash board. It started working but very unstable telling me that there is a problem with that one board at the very least.

They have looked at it but have refuses to fix it!  I reported it while it was still within 30 days on 9/8 and it's now 10/4 and I still have a very unreliable monitor!  Do not buy any of these units!

I finally setup an email alert though does not help me at work where I can not use my phone due to PCI Compliance. You can see the number of times it has failed since 9/29 to today.

My miner arrived DOA.  It would not connect or hash. I contacted them and got no response at all except to give my skype number.. show pictures of problem and the problem has been reported since 9/8 and no solution.

One of the hash boards is pretty much dead!  I can't use the PI controller on the one side.. so I been running it only on the 1 hash board side but now it's completey dying.. will not stay running at all keeps failing and requires power cycling it. 

Defective unit and they will not fix it!

So think twice about buying from them if this is the support you get with there product! I have emailed there support and even skype there support and nada!

Before I was only getting a single email notifying me of a new POST.   Now I can't watch any threads as I am getting 50+ emails a day for new posts.. What the heck changed to the alert notifications?  This is ridiculous and I am going to have to unsubscribe from all threads now

How the hell do you set this thing up?  It came with no manual so I have no idea where to start.

Please help.

Zpool.ca turns out to be a scam.. 32 hours and no damn payout.

Summary   Miners   Shares   Hashrate*   Reject*
decred   2   1.6418%   6.5 GH/s   

Details   Extra   Algo   Diff   ES**   Hashrate*   Reject*
dual      decred   18      5.5 GH/s
dual      decred   4      938.2 MH/s


32 hours and no payout.

Suprnova is not safe as you can not payout directly to a wallet address and it does not have Google Authenticator 2FA.

So I am looking for a reliable and not a scam Decred Pool.

Any recommendations?

Ok I am totally confused with all it's lingo so in basic terms is this going a good direction for us or are we going to get screwed as miners for Ethereum?

http://www.carbonvote.com/

Can someone please explain this in nice clear easy way for what it means for us as miners?

I am avoiding using Nanopool they seem to be having issues with payouts not getting to destination.  All 3 of my payouts lost and my friend had 1 of his 3 lost.

Total paid: 7.7519 PASC

3   2017-03-01 16:48:01   1.4939 PASC   Confirmed
2   2017-03-01 12:55:46   2.3006 PASC   Confirmed
1   2017-03-01 06:38:26   3.9574 PASC   Confirmed

1st payment confirmation
http://explorer.pascalcoin.org/findoperation.php?ophash=970A0100BE5B0400520302004235413941443335463130393746323842333139

2nd payment confirmation
http://explorer.pascalcoin.org/findoperation.php?ophash=D90A0100BE5B0400C20902003430434545344437434442314531374632314444

3rd payment confirmation
http://explorer.pascalcoin.org/findoperation.php?ophash=0A0B0100BE5B0400080E02003134383745333945374632314132334241383439

The payload is correct and deposit address is correct but yet I have no FUNDS in my Polo account.

So unless you feel like gambling I personally would not use Nanopool until they figure out why there payments are not reliable to Poloniex.

I tried Suprnova but it does not work as it requires something called a public key which it appears we do not have for Poloniex deposit address.  I have tried Coinotron and it says improperly formatted payout address.

So that appears to be 2 broken sites that do not work with Poloniex so what pools out there that do?

I am going to stop mining on Suprnova it does not have 2FA and I was hacked already before.  Now I only want 2FA security like Google Authenticator as text emails are a joke.

Anyone suggest a good pool to mine DCR on with 2FA?

I have Windows 10 and it keeps blowing up.. It will run great at default 27-28 MH/s for each RX 480.. I reboot than bam I am down to a lousy 19-20 MH/s!  I have to system restore.. than damn system restore blows up and I can't restore back anymore.. Anyone else having issues with Windows 10?  I am about to try the damn Windows 7 more than 6 GPU hack as I have 7 GPU cards!

XFX RX 480 8GB Hard Swap Edition

Whenever I try to backup my BIOS I only get a 256kb file so when I attempt to edit with Polaris Editor it complains so I am afraid of using the modified BIOS.  Why will Winflash not do the 512kb backup?

I am looking for a custom ethereum mining BIOS for the RX 480 RS 8GB Hardswap Fan Edition.  Anyone have one or know where I can find one?

Windows 10
MSI Gaming Z97 5 motherboard
5 XFX RX 480 8GB

I have Windows 10 with 5 GPU's.  3 are on powered risers but it keeps crashing with blue screen..  Last error was...

Video_TDR_Failure (atikmpag.sys)

GPU: 8GB RX 470 or RX 480?   (prices are so close. Not sure which is best)
Mobo: MSI Z97 Gaming 5  (It will run 7 GPU's in it.  If it does not effect performance I may install a spare R9 280x or R9 380x I have in it also.)
CPU: Intel 1150 socket.  Not sure which CPU to use as I am really unfamiliar with Intel processors.  Maybe nice to let it mine some ZCash or other CPU coin so what would you recommend for CPU?
Memory: 16GB DDR kit in the system
Hard Drive: 256GB SSD (128GB and 256GB are almost same price)
EVGA 1000GQ, 80+ GOLD 1000W, Semi Modular, EVGA ECO Mode, 5 Year Warranty, Power Supply 210-GQ-1000-V1

[OS:]

Woot!  I increased my earnings big time now.

OS: Windows 7 64 bit
Miners: nheqminer_v0.3a, genoil-0.4.1, Claymore 8.0.7
nheqminer (CPU, R9 280x): = 37 Sol/s
genoil-0.4.1 (RX 480, R9 380x): = 21.78 Sol/s
Claymore (mining Eth): = 45.6 MH/s
Pools: Coinotron and Suprnova
CPU: AMD FX-8370 Eight-Core Processor

Claymore by itself 60 MH/s
nheqminer by itself 50 Sol/s

Total Mining now.  Ethereum: 45.6 MH/s   ZCash: 58.78 Sol/s.  

I actually increased over my solo mining of ZCash.

If you do not have older cards like R9 280x you may get by with just genoil-0.4.1 for GPU and nheqminer for CPU mining.

Ok now many will probably want to know what my start scripts are setup as so here you go.

My 3 start scripts for the mining

Code:

@echo off
set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal <worker.name> -esm 2 -epsw <password> -allpools 1 -ethi 1,1,1
@echo on

Code:

genoil.exe -c zec.suprnova.cc:2142 -u <worker.name> -p <password> -g 1 2

Code:

nheqminer_suprnova.exe -u <worker.name> -p <password> -t 4 -od 0