Show Posts
|
Pages: [1] 2 »
|
hello i have lot of t2tz asics some of their hashboards not detect recently, as there is no repair center in my area, i want learn repair myself there is any tester tools for t2tz hashboards?
can anyone teach me how i can detect fault asic on hashboard t2tz?
Thanks
|
|
|
Hello i have an strange issue all was fine, but Firmware was for 2019, i updated it to 2020 and codes errors showing now...
sometimes 35 and sometimes 25
how i can fix this? there is any firmware able fix this this errors?
im sure this is known issue, but hope someone can help me.
Thanks.
|
|
|
Hello there is any custom firmware for m20s? i wanted use oil and wanted disable fan check from firmware (without simulator) if possible anyway, i want know if there is custom firmware for m20s
Thanks
|
|
|
hello i have lot of t17e, and each month i should send them to repair, now i want fix most of issue myself to decrease costs can anyone tell me what is issue for below two miner? 3hashboard detect 78 asic, but two of them can mining: log of miner1: https://paste.ubuntu.com/p/8wHdFtxwcQ/log of miner 2: https://paste.ubuntu.com/p/XhFHktXw4J/im starter at repairing hashboard, kindly please tell me, so i looking for same issue, note: it can be due voltage of hashboard? i mean if i copy data from other hashboard to non-work hashboard, may fix it? Thanks.
|
|
|
hello there is any method i able detect burned or break chip at t17e hashboards? as you know t17e hashboards break each month, and as i have lot of this model, i want detect chip and replace it myself for decrease cost if anyone can help, please let me know without testers possible? or i should have just testers? i can put hashboards on device and get voltage anything for detect break chip?
Thanks.
|
|
|
Hello,
for detect which chip damaget at hashboard t17e i should buy zeusbtc tools? or without them i can do this? im not Repairmanm, but i have lot of t17e and their chip damage every month, and when i send to repairman, they get full money for just one chip so i want learning myself just for change damaged chip
i have voltmeter + heater i need anything else?
if anyone can help me, so i send screenshot of hashboard here, so you tell me where i should put voltmetr to see if its damaged or not?
even if anyone can help me with cost, it appreciated, send me a skype or telegram ID
i just want learn how detect damaged chip and change it just.
Thanks.
|
|
|
Hello which firmware is best for replace with bitmain original firmware for t17e device ?
Thanks.
|
|
|
hello i wanted buy this devices, anyone used them and staisfy? i already purchased t17e and im not satisfy, so i want ask this two model of t2t is good? i mean not break hashboard easy or unable to repair?
second question,
around 30TH upto 50TH, which miner is good?
Thanks for your helps
|
|
|
hello, i have some t17e, i have question about temp sensor model below is model of a t17e set model: 2021-05-30 11:02:58:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2021-05-30 11:02:59:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor TMP451 2021-05-30 11:03:00:temperature.c:272:calibrate_temp_sensor_one_chain: chain 3 temp sensor NCT218 as you see two is NCT218 and one is TMP451 , should be similar ? there is any different if all be NCT218 or all be TMP451 ? Thanks for your help.
|
|
|
Hello can anyone tell me whether t17e psu is auto switch? i mean it will release 12V in start time, or will release 12V later? can anyone tell me more details about this?
Thanks.
|
|
|
hello. what is best voltage and Frequency for hashboards of t17e? i want set manually. screenshot: https://prnt.sc/ydpq3hi set below volt and freq, and it seems is cool, its fine? or its not good? screenshot: https://prnt.sc/ydt2uaThanks.
|
|
|
Hello how i can fix below log on t17e: i used hashboard from different devices, and seems one is different voltage, how i can fix it? 2021-01-21 10:35:24:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 1 fan_pwm : 100 2021-01-21 10:35:30:driver-btm-api.c:1309:init_miner_version: miner ID : 8004a4442b104814 2021-01-21 10:35:30:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023 2021-01-21 10:35:35:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 2, chip ft: A4V41, chip version: AB 2021-01-21 10:35:35:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 2, chip ft: A4V41, chip version: AB 2021-01-21 10:35:35:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB 2021-01-21 10:35:35:driver-btm-api.c:2172:get_calibration_voltage: calibration voltage is error data. 2021-01-21 10:35:35 voltage[0] = 1790 2021-01-21 10:35:35 voltage[1] = 1800 2021-01-21 10:35:35 voltage[2] = 1800 2021-01-21 10:35:35:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1790, max = 1800, will use max one. 2021-01-21 10:35:35:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed voltage_ref = 1800 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2060 2060 2050 2040 2030 1990 1990 1980 1970 1960 1930 1940 1920 1910 1900 1860 1940 1920 1910 1900 1860
Thanks.
|
|
|
hello i have few innosilicon t2tz and it stop working once a day and i should reboot it
i not saw any error log menu at innosilicon panel how i should access to error log of this miners?
alao there is a way i make this miners more heat point?
Thanks
|
|
|
Hello. i have a t17e, one of hashboards show found 78 asic, but Frequency is 0. screenshot: https://prnt.sc/wiziwii also saw below line at log: 2021-01-08 12:14:17:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 8 regs timeout. full log also is below: 021-01-08 12:13:14:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800 2021-01-08 12:13:17:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step. 2021-01-08 12:13:38:uart.c:69:set_baud: set UART baud to 115200 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-01-08 12:13:43:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-01-08 12:13:48:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-01-08 12:13:52:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0 2021-01-08 12:13:52:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic. 2021-01-08 12:13:52:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step. 2021-01-08 12:14:17:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003 2021-01-08 12:14:17:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203 2021-01-08 12:14:17:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00. 2021-01-08 12:14:17:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00. 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 03 core_domain 0: range too wide 0.390015 ~ 0.942993 = 0.552979 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 03 core_domain 1: range too wide 0.410889 ~ 0.942993 = 0.532104 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 03 core_domain 2: range too wide 0.410889 ~ 1.169312 = 0.758423 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 03 core_domain 3: range too wide 0.410889 ~ 1.558960 = 1.148071 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 07 core_domain 0: range too wide 0.137695 ~ 0.866455 = 0.728760 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 07 core_domain 1: range too wide 0.137695 ~ 0.866455 = 0.728760 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 07 core_domain 2: range too wide 0.137695 ~ 0.866455 = 0.728760 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 07 core_domain 3: range too wide 0.137695 ~ 0.866455 = 0.728760 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 08 core_domain 0: range too wide 0.374268 ~ 1.068604 = 0.694336 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 08 core_domain 1: range too wide 0.748535 ~ 1.068604 = 0.320068 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 08 core_domain 2: range too wide 0.750000 ~ 1.117310 = 0.367310 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 08 core_domain 3: range too wide 0.750000 ~ 1.479126 = 0.729126 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 09 core_domain 2: range too wide 1.048096 ~ 1.190186 = 0.142090 2021-01-08 12:14:17:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 09 core_domain 3: range too wide 0.562500 ~ 1.586792 = 1.024292 2021-01-08 12:14:17:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 8 regs timeout. chain 0 domain 0: d0 0.403, d1 0.406, d2 0.379, d3 0.396, sum = 1.582947 chain 0 domain 1: d0 0.361, d1 0.366, d2 0.363, d3 0.364, sum = 1.454102 chain 0 domain 2: d0 0.404, d1 0.411, d2 0.406, d3 0.407, sum = 1.628357 chain 0 domain 3: d0 0.634, d1 0.067, d2 0.063, d3 0.065, sum = 0.829102 chain 0 domain 4: d0 0.382, d1 0.387, d2 0.383, d3 0.379, sum = 1.531616 chain 0 domain 5: d0 0.376, d1 0.381, d2 0.368, d3 0.364, sum = 1.488403 chain 0 domain 6: d0 0.385, d1 0.391, d2 0.369, d3 0.359, sum = 1.504089 chain 0 domain 7: d0 0.488, d1 0.000, d2 0.000, d3 0.000, sum = 0.488159 chain 0 domain 8: d0 0.624, d1 0.187, d2 0.184, d3 0.181, sum = 1.175293 chain 0 domain 9: d0 0.411, d1 0.385, d2 0.367, d3 0.249, sum = 1.412170 chain 0 domain 10: d0 0.379, d1 0.374, d2 0.375, d3 0.368, sum = 1.496033 chain 0 domain 11: d0 0.385, d1 0.381, d2 0.386, d3 0.379, sum = 1.531677 chain 0 domain 12: d0 0.372, d1 0.373, d2 0.370, d3 0.365, sum = 1.479919 chain 0 domain 00 core_domain 0: 0.401 0.003 -0.000 0.000 -0.001 0.000 chain 0 domain 00 core_domain 1: 0.806 0.004 -0.000 0.000 -0.001 0.000 chain 0 domain 00 core_domain 2: 1.187 0.001 -0.000 0.001 -0.002 -0.000 chain 0 domain 00 core_domain 3: 1.582 0.002 -0.000 0.001 -0.003 -0.001 chain 0 domain 01 core_domain 0: 0.365 -0.005 0.000 0.001 -0.000 0.001 chain 0 domain 01 core_domain 1: 0.733 -0.007 -0.001 0.001 0.000 0.000 chain 0 domain 01 core_domain 2: 1.093 -0.001 -0.004 0.002 0.000 -0.001 chain 0 domain 01 core_domain 3: 1.474 -0.020 -0.005 0.001 0.000 -0.002 chain 0 domain 02 core_domain 0: 0.402 0.003 0.001 0.000 -0.001 0.000 chain 0 domain 02 core_domain 1: 0.801 0.018 0.000 0.000 -0.003 0.000 chain 0 domain 02 core_domain 2: 1.210 0.016 -0.001 -0.001 -0.003 0.000 chain 0 domain 02 core_domain 3: 1.613 0.022 -0.002 -0.001 -0.004 0.000 chain 0 domain 03 core_domain 0: 0.390 0.360 -0.282 0.375 0.099 -0.532 chain 0 domain 03 core_domain 1: 0.791 -0.041 -0.282 0.375 0.099 -0.532 chain 0 domain 03 core_domain 2: 1.169 -0.419 -0.282 0.376 0.099 -0.532 chain 0 domain 03 core_domain 3: 1.559 -0.809 -0.282 0.376 0.099 -0.532 chain 0 domain 04 core_domain 0: 0.385 -0.002 -0.001 -0.001 0.001 0.000 chain 0 domain 04 core_domain 1: 0.764 0.010 -0.002 -0.003 0.001 0.000 chain 0 domain 04 core_domain 2: 1.143 0.013 -0.002 -0.003 0.004 0.000 chain 0 domain 04 core_domain 3: 1.496 0.045 -0.003 -0.004 0.005 0.000 chain 0 domain 05 core_domain 0: 0.382 -0.006 -0.002 0.000 -0.000 -0.001 chain 0 domain 05 core_domain 1: 0.764 -0.005 -0.004 -0.000 0.000 -0.002 chain 0 domain 05 core_domain 2: 1.134 -0.007 -0.006 -0.000 0.000 0.001 chain 0 domain 05 core_domain 3: 1.495 -0.005 -0.004 0.000 0.001 0.001 chain 0 domain 06 core_domain 0: 0.384 0.000 0.001 0.000 0.000 0.001 chain 0 domain 06 core_domain 1: 0.766 0.011 0.003 -0.001 -0.001 0.000 chain 0 domain 06 core_domain 2: 1.158 -0.018 0.004 -0.001 -0.000 -0.001 chain 0 domain 06 core_domain 3: 1.544 -0.048 0.001 -0.001 0.001 -0.001 chain 0 domain 07 core_domain 0: * 0.000 0.573 -0.436 0.729 -0.491 *-0.375 chain 0 domain 07 core_domain 1: * 0.000 0.573 -0.436 0.729 -0.491 *-0.375 chain 0 domain 07 core_domain 2: * 0.000 0.573 -0.436 0.729 -0.491 *-0.375 chain 0 domain 07 core_domain 3: * 0.000 0.573 -0.436 0.729 -0.491 *-0.375 chain 0 domain 08 core_domain 0: 0.376 -0.001 0.694 -0.267 -0.051 -0.376 chain 0 domain 08 core_domain 1: 0.750 -0.001 0.320 -0.267 -0.051 -0.001 chain 0 domain 08 core_domain 2: 1.117 -0.000 -0.048 -0.267 -0.051 0.364 chain 0 domain 08 core_domain 3: 1.479 0.000 -0.411 -0.267 -0.051 0.724 chain 0 domain 09 core_domain 0: 0.393 0.007 -0.002 -0.001 0.004 0.080 chain 0 domain 09 core_domain 1: 0.789 -0.001 -0.004 -0.002 0.005 0.058 chain 0 domain 09 core_domain 2: 1.189 0.001 -0.004 -0.004 0.006 -0.139 chain 0 domain 09 core_domain 3: 1.585 0.002 -0.006 -0.006 0.008 -1.020 chain 0 domain 10 core_domain 0: 0.380 -0.003 0.001 0.001 -0.001 -0.000 chain 0 domain 10 core_domain 1: 0.763 -0.014 0.001 0.001 0.001 -0.002 chain 0 domain 10 core_domain 2: 1.147 -0.026 0.002 0.002 0.001 -0.005 chain 0 domain 10 core_domain 3: 1.530 -0.042 0.003 0.000 0.001 -0.005 chain 0 domain 11 core_domain 0: 0.386 0.000 -0.000 -0.001 0.001 -0.002 chain 0 domain 11 core_domain 1: 0.775 -0.010 0.001 -0.003 0.003 -0.003 chain 0 domain 11 core_domain 2: 1.143 0.013 0.000 -0.003 0.001 -0.003 chain 0 domain 11 core_domain 3: 1.497 0.045 0.000 -0.004 0.001 -0.004 chain 0 domain 12 core_domain 0: 0.371 -0.002 0.003 -0.001 0.003 -0.002 chain 0 domain 12 core_domain 1: 0.747 -0.005 0.003 -0.003 0.003 -0.001 chain 0 domain 12 core_domain 2: 1.118 -0.007 0.005 -0.004 0.005 -0.003 chain 0 domain 12 core_domain 3: 1.484 -0.008 0.006 -0.006 0.007 -0.005 2021-01-08 12:14:19:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.382, d1 0.388, d2 0.383, d3 0.344, sum = 1.497559 chain 1 domain 1: d0 0.386, d1 0.388, d2 0.371, d3 0.374, sum = 1.519226 chain 1 domain 2: d0 0.369, d1 0.372, d2 0.362, d3 0.358, sum = 1.461060 chain 1 domain 3: d0 0.402, d1 0.399, d2 0.413, d3 0.405, sum = 1.619568 chain 1 domain 4: d0 0.378, d1 0.380, d2 0.385, d3 0.354, sum = 1.497192 chain 1 domain 5: d0 0.385, d1 0.376, d2 0.379, d3 0.357, sum = 1.496399 chain 1 domain 6: d0 0.382, d1 0.383, d2 0.375, d3 0.355, sum = 1.494568 chain 1 domain 7: d0 0.393, d1 0.396, d2 0.386, d3 0.391, sum = 1.565735 chain 1 domain 8: d0 0.389, d1 0.392, d2 0.384, d3 0.388, sum = 1.553406 chain 1 domain 9: d0 0.378, d1 0.378, d2 0.370, d3 0.366, sum = 1.491760 chain 1 domain 10: d0 0.393, d1 0.389, d2 0.401, d3 0.394, sum = 1.577454 chain 1 domain 11: d0 0.368, d1 0.376, d2 0.361, d3 0.368, sum = 1.473389 chain 1 domain 12: d0 0.374, d1 0.378, d2 0.375, d3 0.357, sum = 1.484253 2021-01-08 12:14:19:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.390, d1 0.387, d2 0.389, d3 0.388, sum = 1.554260 chain 2 domain 1: d0 0.378, d1 0.383, d2 0.382, d3 0.365, sum = 1.507263 chain 2 domain 2: d0 0.375, d1 0.377, d2 0.377, d3 0.371, sum = 1.500549 chain 2 domain 3: d0 0.378, d1 0.378, d2 0.379, d3 0.362, sum = 1.497437 chain 2 domain 4: d0 0.373, d1 0.379, d2 0.367, d3 0.372, sum = 1.491516 chain 2 domain 5: d0 0.392, d1 0.389, d2 0.391, d3 0.391, sum = 1.563782 chain 2 domain 6: d0 0.378, d1 0.373, d2 0.376, d3 0.367, sum = 1.493469 chain 2 domain 7: d0 0.387, d1 0.387, d2 0.380, d3 0.378, sum = 1.531921 chain 2 domain 8: d0 0.385, d1 0.385, d2 0.370, d3 0.366, sum = 1.506104 chain 2 domain 9: d0 0.368, d1 0.369, d2 0.364, d3 0.375, sum = 1.475952 chain 2 domain 10: d0 0.379, d1 0.378, d2 0.383, d3 0.362, sum = 1.501892 chain 2 domain 11: d0 0.379, d1 0.383, d2 0.375, d3 0.358, sum = 1.495056 chain 2 domain 12: d0 0.372, d1 0.371, d2 0.371, d3 0.372, sum = 1.485596 2021-01-08 12:14:19:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 07 volt 0.488 less then request 0.800 (index 0) 2021-01-08 12:14:19:driver-btm-api.c:2379:bitmain_board_init: FAULT: check_asic_number_until_volt_balance PASS but bitmain_board_config_init FAIL!!! 2021-01-08 12:14:22:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2021-01-08 12:14:23:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2021-01-08 12:14:29:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 21 2021-01-08 12:14:29:uart.c:69:set_baud: set UART baud to 3000000 2021-01-08 12:14:29 voltage[1] = 1820 2021-01-08 12:14:29 voltage[2] = 1840 2021-01-08 12:14:29:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1840 2021-01-08 12:14:29:thread.c:1538:create_check_miner_status_thread: create thread 2021-01-08 12:14:29:thread.c:1528:create_show_miner_status_thread: create thread 2021-01-08 12:14:29:thread.c:1503:create_temperature_monitor_thread: create thread 2021-01-08 12:14:29:thread.c:1580:create_fan_monitor_thread: create thread 2021-01-08 12:14:29:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true 2021-01-08 12:14:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 25, chip_temp 24 ~ 31, now 6.0s, target 32.0 2021-01-08 12:14:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 25, chip_temp 23 ~ 30, now 7.0s, target 32.2 2021-01-08 12:14:36:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 55 2021-01-08 12:14:36:frequency.c:665:inc_freq_with_fixed_vco: set to 55M, get pcb 20 ~ 25, chip_temp 23 ~ 30 2021-01-08 12:14:36:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-01-08 12:14:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-01-08 12:14:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 55 clock_counter_limit 5, no check, skip. 2021-01-08 12:14:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 26, chip_temp 23 ~ 33, now 26.0s, target 35.3 2021-01-08 12:14:55:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 64 2021-01-08 12:14:55:frequency.c:665:inc_freq_with_fixed_vco: set to 64M, get pcb 21 ~ 26, chip_temp 23 ~ 33 2021-01-08 12:14:55:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-01-08 12:14:55:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 64 clock_counter_limit 7, no check, skip. 2021-01-08 12:15:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 27, chip_temp 24 ~ 32, now 34.0s, target 36.7 2021-01-08 12:15:03:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 75 2021-01-08 12:17:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 41, chip_temp 31 ~ 58, now 191.2s, target 56.9 2021-01-08 12:17:40:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 58 > 56.9 target_temp. 2021-01-08 12:17:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 40, chip_temp 31 ~ 57, now 197.2s, target 57.9 2021-01-08 12:17:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 40, chip_temp 31 ~ 56, now 198.2s, target 58.0 2021-01-08 12:17:47:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 385 2021-01-08 12:17:47:frequency.c:665:inc_freq_with_fixed_vco: set to 385M, get pcb 24 ~ 40, chip_temp 31 ~ 56 2021-01-08 12:17:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-01-08 12:17:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 385 clock_counter_limit 58, no check, skip. 2021-01-08 12:17:49:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.401, d1 0.391, d2 0.390, d3 0.394, sum = 1.577209 chain 1 domain 1: d0 0.396, d1 0.392, d2 0.396, d3 0.395, sum = 1.579651 chain 1 domain 2: d0 0.395, d1 0.387, d2 0.406, d3 0.396, sum = 1.583801 chain 1 domain 3: d0 0.414, d1 0.400, d2 0.399, d3 0.404, sum = 1.617126 chain 1 domain 4: d0 0.398, d1 0.394, d2 0.410, d3 0.400, sum = 1.601929 chain 1 domain 5: d0 0.409, d1 0.405, d2 0.393, d3 0.402, sum = 1.609558 chain 1 domain 6: d0 0.404, d1 0.391, d2 0.408, d3 0.401, sum = 1.603882 chain 1 domain 7: d0 0.402, d1 0.405, d2 0.390, d3 0.399, sum = 1.595947 chain 1 domain 8: d0 0.409, d1 0.395, d2 0.399, d3 0.401, sum = 1.604553 chain 1 domain 9: d0 0.403, d1 0.401, d2 0.377, d3 0.394, sum = 1.575378 chain 1 domain 10: d0 0.410, d1 0.403, d2 0.405, d3 0.406, sum = 1.622742 chain 1 domain 11: d0 0.397, d1 0.395, d2 0.392, d3 0.395, sum = 1.579041 chain 1 domain 12: d0 0.392, d1 0.390, d2 0.389, d3 0.390, sum = 1.560852 2021-01-08 12:17:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.408, d1 0.397, d2 0.407, d3 0.404, sum = 1.616699 chain 2 domain 1: d0 0.397, d1 0.401, d2 0.387, d3 0.395, sum = 1.580017 chain 2 domain 2: d0 0.398, d1 0.403, d2 0.397, d3 0.400, sum = 1.598267 chain 2 domain 3: d0 0.399, d1 0.401, d2 0.394, d3 0.398, sum = 1.592957 chain 2 domain 4: d0 0.397, d1 0.397, d2 0.393, d3 0.396, sum = 1.582581 chain 2 domain 5: d0 0.404, d1 0.398, d2 0.410, d3 0.404, sum = 1.615967 chain 2 domain 6: d0 0.396, d1 0.400, d2 0.386, d3 0.394, sum = 1.576294 chain 2 domain 7: d0 0.394, d1 0.399, d2 0.398, d3 0.397, sum = 1.588440 chain 2 domain 8: d0 0.397, d1 0.392, d2 0.399, d3 0.396, sum = 1.583557 chain 2 domain 9: d0 0.399, d1 0.400, d2 0.376, d3 0.391, sum = 1.566040 chain 2 domain 10: d0 0.401, d1 0.407, d2 0.398, d3 0.402, sum = 1.607788 chain 2 domain 11: d0 0.398, d1 0.398, d2 0.390, d3 0.395, sum = 1.581360 chain 2 domain 12: d0 0.392, d1 0.390, d2 0.390, d3 0.390, sum = 1.561279 2021-01-08 12:17:50:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:17:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 23 ~ 42, chip_temp 34 ~ 64, now 207.4s, target 59.6 2021-01-08 12:18:44:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 71 > 67.6 target_temp. 2021-01-08 12:18:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 49, chip_temp 35 ~ 71, now 261.4s, target 68.6 2021-01-08 12:18:50:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 71 > 68.6 target_temp. 2021-01-08 12:18:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 35 ~ 70, now 267.4s, target 69.6 2021-01-08 12:18:56:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 70 > 69.6 target_temp. 2021-01-08 12:19:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 35 ~ 71, now 273.4s, target 70.6 2021-01-08 12:19:02:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 71 > 70.6 target_temp. 2021-01-08 12:19:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 35 ~ 70, now 279.4s, target 71.6 2021-01-08 12:19:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 51, chip_temp 35 ~ 72, now 280.4s, target 71.7 2021-01-08 12:19:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 72 > 71.7 target_temp. 2021-01-08 12:19:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 35 ~ 72, now 286.4s, target 72.7 2021-01-08 12:19:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 49, chip_temp 35 ~ 74, now 287.4s, target 72.9 2021-01-08 12:19:16:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 74 > 72.9 target_temp. 2021-01-08 12:19:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 47, chip_temp 36 ~ 72, now 293.4s, target 73.9 2021-01-08 12:19:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 34 ~ 71, now 294.4s, target 74.1 2021-01-08 12:19:23:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 450 2021-01-08 12:19:23:frequency.c:665:inc_freq_with_fixed_vco: set to 450M, get pcb 26 ~ 50, chip_temp 34 ~ 71 2021-01-08 12:19:23:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2070, step by step. 2021-01-08 12:19:31:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.396, d1 0.388, d2 0.379, d3 0.387, sum = 1.549988 chain 1 domain 1: d0 0.393, d1 0.381, d2 0.380, d3 0.385, sum = 1.538940 chain 1 domain 2: d0 0.386, d1 0.380, d2 0.384, d3 0.362, sum = 1.511353 chain 1 domain 3: d0 0.403, d1 0.400, d2 0.413, d3 0.405, sum = 1.621948 chain 1 domain 4: d0 0.399, d1 0.385, d2 0.391, d3 0.392, sum = 1.566711 chain 1 domain 5: d0 0.403, d1 0.389, d2 0.396, d3 0.396, sum = 1.584473 chain 1 domain 6: d0 0.397, d1 0.384, d2 0.389, d3 0.390, sum = 1.559692 chain 1 domain 7: d0 0.399, d1 0.403, d2 0.398, d3 0.400, sum = 1.599976 chain 1 domain 8: d0 0.399, d1 0.405, d2 0.379, d3 0.394, sum = 1.577087 chain 1 domain 9: d0 0.396, d1 0.383, d2 0.385, d3 0.388, sum = 1.552124 chain 1 domain 10: d0 0.404, d1 0.391, d2 0.409, d3 0.401, sum = 1.604980 chain 1 domain 11: d0 0.392, d1 0.389, d2 0.388, d3 0.390, sum = 1.559082 chain 1 domain 12: d0 0.385, d1 0.384, d2 0.383, d3 0.379, sum = 1.530884 2021-01-08 12:19:31:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.398, d1 0.395, d2 0.394, d3 0.396, sum = 1.583130 chain 2 domain 1: d0 0.391, d1 0.389, d2 0.387, d3 0.389, sum = 1.556335 chain 2 domain 2: d0 0.396, d1 0.389, d2 0.414, d3 0.399, sum = 1.597290 chain 2 domain 3: d0 0.396, d1 0.388, d2 0.388, d3 0.390, sum = 1.561829 chain 2 domain 4: d0 0.396, d1 0.388, d2 0.400, d3 0.394, sum = 1.577637 chain 2 domain 5: d0 0.399, d1 0.404, d2 0.390, d3 0.398, sum = 1.591492 chain 2 domain 6: d0 0.395, d1 0.394, d2 0.378, d3 0.389, sum = 1.555969 chain 2 domain 7: d0 0.386, d1 0.383, d2 0.387, d3 0.385, sum = 1.542175 chain 2 domain 8: d0 0.390, d1 0.385, d2 0.413, d3 0.396, sum = 1.584961 chain 2 domain 9: d0 0.391, d1 0.383, d2 0.381, d3 0.385, sum = 1.539978 chain 2 domain 10: d0 0.394, d1 0.388, d2 0.414, d3 0.398, sum = 1.593323 chain 2 domain 11: d0 0.393, d1 0.392, d2 0.389, d3 0.391, sum = 1.565796 chain 2 domain 12: d0 0.387, d1 0.384, d2 0.383, d3 0.379, sum = 1.533203 2021-01-08 12:19:31:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:19:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-01-08 12:19:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 450 clock_counter_limit 69, no check, skip. 2021-01-08 12:19:34:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.391, d1 0.397, d2 0.377, d3 0.388, sum = 1.552795 chain 1 domain 1: d0 0.391, d1 0.388, d2 0.379, d3 0.379, sum = 1.536499 chain 1 domain 2: d0 0.385, d1 0.391, d2 0.372, d3 0.374, sum = 1.522156 chain 1 domain 3: d0 0.407, d1 0.390, d2 0.395, d3 0.397, sum = 1.589478 chain 1 domain 4: d0 0.393, d1 0.395, d2 0.386, d3 0.391, sum = 1.564697 chain 1 domain 5: d0 0.406, d1 0.381, d2 0.393, d3 0.393, sum = 1.573608 chain 1 domain 6: d0 0.391, d1 0.402, d2 0.393, d3 0.395, sum = 1.581360 chain 1 domain 7: d0 0.399, d1 0.402, d2 0.394, d3 0.398, sum = 1.593689 chain 1 domain 8: d0 0.397, d1 0.407, d2 0.381, d3 0.395, sum = 1.580139 chain 1 domain 9: d0 0.393, d1 0.387, d2 0.402, d3 0.394, sum = 1.575562 chain 1 domain 10: d0 0.401, d1 0.394, d2 0.394, d3 0.396, sum = 1.585022 chain 1 domain 11: d0 0.392, d1 0.387, d2 0.389, d3 0.389, sum = 1.557251 chain 1 domain 12: d0 0.385, d1 0.383, d2 0.382, d3 0.374, sum = 1.524048 2021-01-08 12:19:34:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.397, d1 0.400, d2 0.388, d3 0.395, sum = 1.580322 chain 2 domain 1: d0 0.397, d1 0.384, d2 0.386, d3 0.389, sum = 1.555420 chain 2 domain 2: d0 0.397, d1 0.403, d2 0.399, d3 0.399, sum = 1.597961 chain 2 domain 3: d0 0.396, d1 0.399, d2 0.398, d3 0.397, sum = 1.590149 chain 2 domain 4: d0 0.395, d1 0.389, d2 0.390, d3 0.391, sum = 1.565125 chain 2 domain 5: d0 0.403, d1 0.390, d2 0.394, d3 0.396, sum = 1.582336 chain 2 domain 6: d0 0.391, d1 0.395, d2 0.381, d3 0.389, sum = 1.555115 chain 2 domain 7: d0 0.391, d1 0.393, d2 0.375, d3 0.386, sum = 1.545654 chain 2 domain 8: d0 0.392, d1 0.385, d2 0.384, d3 0.387, sum = 1.547363 chain 2 domain 9: d0 0.391, d1 0.382, d2 0.383, d3 0.385, sum = 1.541077 chain 2 domain 10: d0 0.393, d1 0.394, d2 0.399, d3 0.395, sum = 1.581055 chain 2 domain 11: d0 0.396, d1 0.399, d2 0.374, d3 0.389, sum = 1.557312 chain 2 domain 12: d0 0.387, d1 0.384, d2 0.383, d3 0.379, sum = 1.532593 2021-01-08 12:19:34:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:19:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 51, chip_temp 36 ~ 75, now 311.8s, target 77.0 2021-01-08 12:19:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 50, chip_temp 35 ~ 74, now 312.8s, target 77.1 2021-01-08 12:19:41:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 540 2021-01-08 12:19:41:frequency.c:665:inc_freq_with_fixed_vco: set to 540M, get pcb 26 ~ 50, chip_temp 35 ~ 74 2021-01-08 12:19:41:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1980, step by step. 2021-01-08 12:19:51:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.375, d1 0.380, d2 0.360, d3 0.378, sum = 1.493408 chain 1 domain 1: d0 0.379, d1 0.366, d2 0.379, d3 0.349, sum = 1.473328 chain 1 domain 2: d0 0.370, d1 0.376, d2 0.355, d3 0.371, sum = 1.471802 chain 1 domain 3: d0 0.391, d1 0.381, d2 0.367, d3 0.379, sum = 1.517578 chain 1 domain 4: d0 0.379, d1 0.383, d2 0.379, d3 0.349, sum = 1.490540 chain 1 domain 5: d0 0.383, d1 0.385, d2 0.370, d3 0.357, sum = 1.495239 chain 1 domain 6: d0 0.374, d1 0.373, d2 0.384, d3 0.354, sum = 1.485046 chain 1 domain 7: d0 0.386, d1 0.372, d2 0.372, d3 0.364, sum = 1.494202 chain 1 domain 8: d0 0.379, d1 0.374, d2 0.375, d3 0.376, sum = 1.503662 chain 1 domain 9: d0 0.377, d1 0.367, d2 0.388, d3 0.350, sum = 1.481079 chain 1 domain 10: d0 0.383, d1 0.377, d2 0.394, d3 0.342, sum = 1.496216 chain 1 domain 11: d0 0.376, d1 0.371, d2 0.369, d3 0.371, sum = 1.487854 chain 1 domain 12: d0 0.368, d1 0.367, d2 0.366, d3 0.366, sum = 1.466614 2021-01-08 12:19:52:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.381, d1 0.377, d2 0.379, d3 0.357, sum = 1.494324 chain 2 domain 1: d0 0.377, d1 0.382, d2 0.370, d3 0.366, sum = 1.495361 chain 2 domain 2: d0 0.376, d1 0.378, d2 0.371, d3 0.366, sum = 1.490906 chain 2 domain 3: d0 0.383, d1 0.378, d2 0.378, d3 0.358, sum = 1.497131 chain 2 domain 4: d0 0.383, d1 0.376, d2 0.365, d3 0.366, sum = 1.489929 chain 2 domain 5: d0 0.388, d1 0.385, d2 0.364, d3 0.357, sum = 1.493958 chain 2 domain 6: d0 0.374, d1 0.373, d2 0.379, d3 0.365, sum = 1.490479 chain 2 domain 7: d0 0.370, d1 0.375, d2 0.354, d3 0.382, sum = 1.480774 chain 2 domain 8: d0 0.380, d1 0.367, d2 0.392, d3 0.354, sum = 1.493286 chain 2 domain 9: d0 0.381, d1 0.368, d2 0.373, d3 0.371, sum = 1.492249 chain 2 domain 10: d0 0.375, d1 0.381, d2 0.370, d3 0.368, sum = 1.494934 chain 2 domain 11: d0 0.383, d1 0.370, d2 0.366, d3 0.367, sum = 1.486023 chain 2 domain 12: d0 0.370, d1 0.367, d2 0.367, d3 0.368, sum = 1.472839 2021-01-08 12:19:52:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:19:52:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-01-08 12:19:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 540 clock_counter_limit 83, no check, skip. 2021-01-08 12:19:54:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.376, d1 0.381, d2 0.374, d3 0.348, sum = 1.478699 chain 1 domain 1: d0 0.371, d1 0.373, d2 0.380, d3 0.349, sum = 1.472839 chain 1 domain 2: d0 0.370, d1 0.367, d2 0.368, d3 0.367, sum = 1.471924 chain 1 domain 3: d0 0.383, d1 0.377, d2 0.380, d3 0.357, sum = 1.497131 chain 1 domain 4: d0 0.381, d1 0.376, d2 0.363, d3 0.376, sum = 1.495422 chain 1 domain 5: d0 0.380, d1 0.372, d2 0.397, d3 0.343, sum = 1.492249 chain 1 domain 6: d0 0.373, d1 0.376, d2 0.366, d3 0.375, sum = 1.489990 chain 1 domain 7: d0 0.379, d1 0.374, d2 0.389, d3 0.350, sum = 1.491394 chain 1 domain 8: d0 0.384, d1 0.386, d2 0.364, d3 0.358, sum = 1.492798 chain 1 domain 9: d0 0.376, d1 0.367, d2 0.366, d3 0.384, sum = 1.492615 chain 1 domain 10: d0 0.386, d1 0.379, d2 0.373, d3 0.370, sum = 1.508240 chain 1 domain 11: d0 0.375, d1 0.372, d2 0.369, d3 0.371, sum = 1.487061 chain 1 domain 12: d0 0.368, d1 0.366, d2 0.365, d3 0.366, sum = 1.464294 2021-01-08 12:19:55:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.380, d1 0.380, d2 0.390, d3 0.383, sum = 1.533203 chain 2 domain 1: d0 0.376, d1 0.381, d2 0.367, d3 0.368, sum = 1.492188 chain 2 domain 2: d0 0.377, d1 0.374, d2 0.374, d3 0.367, sum = 1.491577 chain 2 domain 3: d0 0.377, d1 0.372, d2 0.371, d3 0.370, sum = 1.490601 chain 2 domain 4: d0 0.377, d1 0.375, d2 0.373, d3 0.367, sum = 1.491516 chain 2 domain 5: d0 0.380, d1 0.385, d2 0.385, d3 0.384, sum = 1.534485 chain 2 domain 6: d0 0.374, d1 0.371, d2 0.376, d3 0.367, sum = 1.488464 chain 2 domain 7: d0 0.371, d1 0.365, d2 0.367, d3 0.360, sum = 1.463135 chain 2 domain 8: d0 0.381, d1 0.375, d2 0.355, d3 0.377, sum = 1.487305 chain 2 domain 9: d0 0.378, d1 0.378, d2 0.349, d3 0.380, sum = 1.484619 chain 2 domain 10: d0 0.375, d1 0.373, d2 0.372, d3 0.372, sum = 1.492737 chain 2 domain 11: d0 0.376, d1 0.369, d2 0.391, d3 0.356, sum = 1.491699 chain 2 domain 12: d0 0.369, d1 0.367, d2 0.367, d3 0.367, sum = 1.469666 2021-01-08 12:19:55:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:19:55:frequency.c:717:inc_freq_with_fixed_step: chain = 2, freq_start = 540, freq_end = 620, freq_step = 5, is_higher_voltage = true 2021-01-08 12:19:55:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 545 clock_counter_limit 84, no check, skip. 2021-01-08 12:19:57:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 550 clock_counter_limit 85, no check, skip. 2021-01-08 12:19:59:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1910, step by step. 2021-01-08 12:20:09:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.362, d1 0.359, d2 0.357, d3 0.356, sum = 1.434448 chain 1 domain 1: d0 0.365, d1 0.354, d2 0.364, d3 0.349, sum = 1.432434 chain 1 domain 2: d0 0.356, d1 0.353, d2 0.356, d3 0.354, sum = 1.418701 chain 1 domain 3: d0 0.373, d1 0.360, d2 0.386, d3 0.361, sum = 1.480164 chain 1 domain 4: d0 0.365, d1 0.368, d2 0.360, d3 0.351, sum = 1.443787 chain 1 domain 5: d0 0.371, d1 0.358, d2 0.366, d3 0.353, sum = 1.447815 chain 1 domain 6: d0 0.363, d1 0.356, d2 0.359, d3 0.371, sum = 1.448853 chain 1 domain 7: d0 0.365, d1 0.375, d2 0.358, d3 0.375, sum = 1.473267 chain 1 domain 8: d0 0.370, d1 0.370, d2 0.350, d3 0.356, sum = 1.446228 chain 1 domain 9: d0 0.366, d1 0.352, d2 0.357, d3 0.352, sum = 1.426819 chain 1 domain 10: d0 0.367, d1 0.367, d2 0.373, d3 0.356, sum = 1.463257 chain 1 domain 11: d0 0.363, d1 0.357, d2 0.359, d3 0.358, sum = 1.435730 chain 1 domain 12: d0 0.354, d1 0.354, d2 0.353, d3 0.352, sum = 1.413818 2021-01-08 12:20:09:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.367, d1 0.364, d2 0.374, d3 0.379, sum = 1.483704 chain 2 domain 1: d0 0.367, d1 0.365, d2 0.345, d3 0.367, sum = 1.444336 chain 2 domain 2: d0 0.370, d1 0.364, d2 0.364, d3 0.378, sum = 1.476196 chain 2 domain 3: d0 0.365, d1 0.357, d2 0.373, d3 0.374, sum = 1.468811 chain 2 domain 4: d0 0.363, d1 0.370, d2 0.352, d3 0.367, sum = 1.453247 chain 2 domain 5: d0 0.367, d1 0.364, d2 0.379, d3 0.372, sum = 1.481506 chain 2 domain 6: d0 0.360, d1 0.358, d2 0.358, d3 0.361, sum = 1.437561 chain 2 domain 7: d0 0.361, d1 0.363, d2 0.338, d3 0.349, sum = 1.410889 chain 2 domain 8: d0 0.360, d1 0.355, d2 0.382, d3 0.352, sum = 1.448486 chain 2 domain 9: d0 0.361, d1 0.353, d2 0.360, d3 0.377, sum = 1.451416 chain 2 domain 10: d0 0.361, d1 0.367, d2 0.356, d3 0.358, sum = 1.442017 chain 2 domain 11: d0 0.366, d1 0.366, d2 0.363, d3 0.348, sum = 1.443359 chain 2 domain 12: d0 0.356, d1 0.354, d2 0.354, d3 0.355, sum = 1.418274 2021-01-08 12:20:10:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-01-08 12:20:10:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 555 clock_counter_limit 85, no check, skip. 2021-01-08 12:20:12:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 560 clock_counter_limit 86, no check, skip. 2021-01-08 12:20:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 565 clock_counter_limit 87, no check, skip. 2021-01-08 12:20:16:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 570 clock_counter_limit 88, no check, skip. 2021-01-08 12:20:18:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 575 clock_counter_limit 89, no check, skip. 2021-01-08 12:20:20:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 580 clock_counter_limit 89, no check, skip. 2021-01-08 12:20:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 585 clock_counter_limit 90, no check, skip. 2021-01-08 12:20:24:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 590 clock_counter_limit 91, no check, skip. 2021-01-08 12:20:26:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 595 clock_counter_limit 92, no check, skip. 2021-01-08 12:20:28:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 600 clock_counter_limit 93, no check, skip. 2021-01-08 12:20:30:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 605 clock_counter_limit 93, no check, skip. 2021-01-08 12:20:32:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 610 clock_counter_limit 94, no check, skip. 2021-01-08 12:20:34:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 615 clock_counter_limit 95, no check, skip. 2021-01-08 12:20:36:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 620 clock_counter_limit 96, no check, skip. 2021-01-08 12:20:38:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5 2021-01-08 12:20:46:driver-btm-api.c:666:set_timeout: freq = 620, percent = 90, hcn = 707788, timeout = 1140 2021-01-08 12:20:46:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1840, step by step. 2021-01-08 12:20:56:thread.c:1533:create_check_system_status_thread: create thread 2021-01-08 12:20:56:thread.c:1508:create_asic_status_monitor_thread: create thread 2021-01-08 12:20:57:driver-btm-api.c:2599:bitmain_soc_init: Init done! 2021-01-08 12:21:01:driver-btm-api.c:247:set_miner_status: STATUS_OKAY 2021-01-08 12:21:02:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 35743 2021-01-08 12:21:02:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 32000 2021-01-08 12:21:06:driver-btm-api.c:1634:dhash_chip_send_job: Version num 1 2021-01-08 12:21:24:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8 2021-01-08 12:21:24:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1610108484, block_ntime 1610108483
|
|
|
Hello. i have a t17e. one hashboard is 91 degree, screenshot below: https://image.prntscr.com/image/-VuinsLYS8aov1m8Gkey1Q.pngnow i want know if it has any issue? should i do send hashboard to repair? or its normall? how i can check its which hashboard? i mean its Chain[0] or Chain[1] or Chain[2]? log is below: request_mem_region OK! 2020-12-24 21:27:18:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1820, max = 1830, will use max one. 2020-12-24 21:27:18:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed voltage_ref = 1830
2020-12-24 21:27:18:thread.c:1523:create_read_nonce_reg_thread: create thread 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-12-24 21:27:25:driver-btm-api.c:2344:bitmain_board_init: Fan check passed. 2020-12-24 21:27:26:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-12-24 21:27:28:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-12-24 21:27:29:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-12-24 21:27:31:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-12-24 21:27:32:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-12-24 21:27:34:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-12-24 21:27:34:thread.c:1518:create_pic_heart_beat_thread: create thread 2020-12-24 21:27:36:power_api.c:241:power_init: power type version: 0x0042 2020-12-24 21:27:37:power_api.c:259:power_init: Power init: 2020-12-24 21:27:37:power_api.c:260:power_init: current_voltage_raw = 1932 2020-12-24 21:27:37:power_api.c:261:power_init: highest_voltage_raw = 2000 2020-12-24 21:27:37:power_api.c:262:power_init: working_voltage_raw = 1800 2020-12-24 21:27:37:power_api.c:263:power_init: higher_voltage_raw = 1850 2020-12-24 21:27:37:power_api.c:264:power_init: check_asic_voltage_raw = 1800 2020-12-24 21:27:37:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish. 2020-12-24 21:28:39:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic: 2020-12-24 21:28:39:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800 2020-12-24 21:28:42:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step. 2020-12-24 21:28:56:uart.c:69:set_baud: set UART baud to 115200 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:00:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:05:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:09:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0 2020-12-24 21:29:09:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic. 2020-12-24 21:29:09:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-12-24 21:29:34:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003 2020-12-24 21:29:34:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203 2020-12-24 21:29:34:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.391, d1 0.391, d2 0.379, d3 0.387, sum = 1.548706 chain 0 domain 1: d0 0.383, d1 0.388, d2 0.383, d3 0.375, sum = 1.529724 chain 0 domain 2: d0 0.379, d1 0.375, d2 0.388, d3 0.356, sum = 1.497864 chain 0 domain 3: d0 0.374, d1 0.372, d2 0.365, d3 0.376, sum = 1.487610 chain 0 domain 4: d0 0.392, d1 0.390, d2 0.385, d3 0.389, sum = 1.554993 chain 0 domain 5: d0 0.388, d1 0.385, d2 0.397, d3 0.390, sum = 1.560364 chain 0 domain 6: d0 0.389, d1 0.390, d2 0.377, d3 0.366, sum = 1.521973 chain 0 domain 7: d0 0.398, d1 0.392, d2 0.398, d3 0.396, sum = 1.583313 chain 0 domain 8: d0 0.376, d1 0.382, d2 0.383, d3 0.353, sum = 1.494934 chain 0 domain 9: d0 0.389, d1 0.390, d2 0.384, d3 0.387, sum = 1.549988 chain 0 domain 10: d0 0.373, d1 0.380, d2 0.367, d3 0.372, sum = 1.491638 chain 0 domain 11: d0 0.380, d1 0.372, d2 0.386, d3 0.358, sum = 1.494873 chain 0 domain 12: d0 0.360, d1 0.363, d2 0.362, d3 0.361, sum = 1.445984 2020-12-24 21:29:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.379, d1 0.389, d2 0.381, d3 0.348, sum = 1.497314 chain 1 domain 1: d0 0.410, d1 0.405, d2 0.388, d3 0.401, sum = 1.604614 chain 1 domain 2: d0 0.395, d1 0.395, d2 0.398, d3 0.396, sum = 1.583618 chain 1 domain 3: d0 0.360, d1 0.373, d2 0.377, d3 0.375, sum = 1.485352 chain 1 domain 4: d0 0.381, d1 0.385, d2 0.398, d3 0.388, sum = 1.551758 chain 1 domain 5: d0 0.377, d1 0.374, d2 0.389, d3 0.371, sum = 1.511902 chain 1 domain 6: d0 0.400, d1 0.400, d2 0.411, d3 0.404, sum = 1.615234 chain 1 domain 7: d0 0.391, d1 0.399, d2 0.384, d3 0.391, sum = 1.564697 chain 1 domain 8: d0 0.362, d1 0.375, d2 0.370, d3 0.381, sum = 1.488220 chain 1 domain 9: d0 0.369, d1 0.380, d2 0.381, d3 0.363, sum = 1.493347 chain 1 domain 10: d0 0.366, d1 0.372, d2 0.389, d3 0.359, sum = 1.484924 chain 1 domain 11: d0 0.372, d1 0.380, d2 0.374, d3 0.369, sum = 1.494629 chain 1 domain 12: d0 0.365, d1 0.371, d2 0.371, d3 0.370, sum = 1.477722 2020-12-24 21:29:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.384, d1 0.376, d2 0.395, d3 0.385, sum = 1.540344 chain 2 domain 1: d0 0.390, d1 0.389, d2 0.384, d3 0.387, sum = 1.550110 chain 2 domain 2: d0 0.398, d1 0.402, d2 0.382, d3 0.394, sum = 1.574707 chain 2 domain 3: d0 0.379, d1 0.378, d2 0.390, d3 0.350, sum = 1.496155 chain 2 domain 4: d0 0.391, d1 0.384, d2 0.385, d3 0.387, sum = 1.547668 chain 2 domain 5: d0 0.381, d1 0.384, d2 0.372, d3 0.366, sum = 1.502563 chain 2 domain 6: d0 0.386, d1 0.393, d2 0.373, d3 0.384, sum = 1.535828 chain 2 domain 7: d0 0.364, d1 0.373, d2 0.361, d3 0.374, sum = 1.472229 chain 2 domain 8: d0 0.382, d1 0.389, d2 0.398, d3 0.390, sum = 1.559021 chain 2 domain 9: d0 0.383, d1 0.384, d2 0.366, d3 0.369, sum = 1.502014 chain 2 domain 10: d0 0.375, d1 0.374, d2 0.385, d3 0.358, sum = 1.491516 chain 2 domain 11: d0 0.393, d1 0.387, d2 0.399, d3 0.393, sum = 1.571472 chain 2 domain 12: d0 0.368, d1 0.369, d2 0.369, d3 0.370, sum = 1.476440 2020-12-24 21:29:35:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:29:37:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-12-24 21:29:38:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2020-12-24 21:29:40:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2020-12-24 21:29:45:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 8 2020-12-24 21:29:45:uart.c:69:set_baud: set UART baud to 3000000 2020-12-24 21:29:45 voltage[0] = 1830 2020-12-24 21:29:45 voltage[1] = 1820 2020-12-24 21:29:45 voltage[2] = 1830 2020-12-24 21:29:45:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1820, max = 1830, will use max one. 2020-12-24 21:29:45:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1830 2020-12-24 21:29:45:thread.c:1538:create_check_miner_status_thread: create thread 2020-12-24 21:29:45:thread.c:1528:create_show_miner_status_thread: create thread 2020-12-24 21:29:45:thread.c:1503:create_temperature_monitor_thread: create thread 2020-12-24 21:29:45:thread.c:1580:create_fan_monitor_thread: create thread 2020-12-24 21:29:45:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 530, is_higher_voltage = true 2020-12-24 21:29:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 13 ~ 21, now 6.0s, target 21.0 2020-12-24 21:29:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 13 ~ 21, now 7.0s, target 21.2 2020-12-24 21:29:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 12 ~ 21, now 8.0s, target 21.3 2020-12-24 21:29:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 15, chip_temp 12 ~ 21, now 9.0s, target 21.5 2020-12-24 21:29:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 22, now 10.0s, target 21.7 2020-12-24 21:29:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 22 > 21.7 target_temp. 2020-12-24 21:30:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 12 ~ 21, now 16.0s, target 22.7 2020-12-24 21:30:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 12 ~ 22, now 17.0s, target 22.8 2020-12-24 21:30:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 22, now 18.0s, target 23.0 2020-12-24 21:30:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 13 ~ 22, now 19.0s, target 23.2 2020-12-24 21:30:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 20, now 20.0s, target 23.3 2020-12-24 21:30:05:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 54 2020-12-24 21:30:05:frequency.c:665:inc_freq_with_fixed_vco: set to 54M, get pcb 9 ~ 16, chip_temp 13 ~ 20 2020-12-24 21:30:05:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-12-24 21:30:18:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:18:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 54 clock_counter_limit 5, no check, skip. 2020-12-24 21:30:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 14 ~ 23, now 40.7s, target 26.8 2020-12-24 21:30:26:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 63 2020-12-24 21:30:26:frequency.c:665:inc_freq_with_fixed_vco: set to 63M, get pcb 9 ~ 16, chip_temp 14 ~ 23 2020-12-24 21:30:26:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:26:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 63 clock_counter_limit 7, no check, skip. 2020-12-24 21:30:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 17, chip_temp 14 ~ 25, now 48.8s, target 28.1 2020-12-24 21:30:34:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 73 2020-12-24 21:30:34:frequency.c:665:inc_freq_with_fixed_vco: set to 73M, get pcb 9 ~ 17, chip_temp 14 ~ 25 2020-12-24 21:30:34:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:34:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 73 clock_counter_limit 8, no check, skip. 2020-12-24 21:30:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 17, chip_temp 14 ~ 25, now 56.8s, target 29.5 2020-12-24 21:30:42:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 75 2020-12-24 21:30:42:frequency.c:665:inc_freq_with_fixed_vco: set to 75M, get pcb 10 ~ 17, chip_temp 14 ~ 25 2020-12-24 21:30:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 75 clock_counter_limit 9, no check, skip. 2020-12-24 21:30:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 19, chip_temp 15 ~ 25, now 64.8s, target 30.8 2020-12-24 21:30:50:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 88 2020-12-24 21:30:50:frequency.c:665:inc_freq_with_fixed_vco: set to 88M, get pcb 10 ~ 19, chip_temp 15 ~ 25 2020-12-24 21:30:50:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 88 clock_counter_limit 11, no check, skip. 2020-12-24 21:30:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 19, chip_temp 15 ~ 26, now 72.8s, target 29.1 2020-12-24 21:30:58:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 94 2020-12-24 21:30:58:frequency.c:665:inc_freq_with_fixed_vco: set to 94M, get pcb 9 ~ 19, chip_temp 15 ~ 26 2020-12-24 21:30:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 94 clock_counter_limit 12, no check, skip. 2020-12-24 21:31:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 20, chip_temp 15 ~ 28, now 80.8s, target 30.5 2020-12-24 21:31:06:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 106 2020-12-24 21:31:06:frequency.c:665:inc_freq_with_fixed_vco: set to 106M, get pcb 9 ~ 20, chip_temp 15 ~ 28 2020-12-24 21:31:06:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:06:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 106 clock_counter_limit 13, no check, skip. 2020-12-24 21:31:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 20, chip_temp 15 ~ 29, now 88.8s, target 31.8 2020-12-24 21:31:14:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 110 2020-12-24 21:31:14:frequency.c:665:inc_freq_with_fixed_vco: set to 110M, get pcb 10 ~ 20, chip_temp 15 ~ 29 2020-12-24 21:31:14:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 110 clock_counter_limit 14, no check, skip. 2020-12-24 21:31:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 20, chip_temp 15 ~ 31, now 96.8s, target 33.1 2020-12-24 21:31:22:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 126 2020-12-24 21:31:22:frequency.c:665:inc_freq_with_fixed_vco: set to 126M, get pcb 10 ~ 20, chip_temp 15 ~ 31 2020-12-24 21:31:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 126 clock_counter_limit 17, no check, skip. 2020-12-24 21:31:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 21, chip_temp 16 ~ 32, now 104.8s, target 34.5 2020-12-24 21:31:30:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 132 2020-12-24 21:31:30:frequency.c:665:inc_freq_with_fixed_vco: set to 132M, get pcb 10 ~ 21, chip_temp 16 ~ 32 2020-12-24 21:31:30:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:30:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 132 clock_counter_limit 18, no check, skip. 2020-12-24 21:31:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 21, chip_temp 14 ~ 33, now 112.8s, target 35.8 2020-12-24 21:31:38:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 147 2020-12-24 21:31:38:frequency.c:665:inc_freq_with_fixed_vco: set to 147M, get pcb 10 ~ 21, chip_temp 14 ~ 33 2020-12-24 21:31:38:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:38:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 147 clock_counter_limit 20, no check, skip. 2020-12-24 21:31:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 23, chip_temp 17 ~ 35, now 120.9s, target 37.1 2020-12-24 21:31:46:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 176 2020-12-24 21:31:46:frequency.c:665:inc_freq_with_fixed_vco: set to 176M, get pcb 10 ~ 23, chip_temp 17 ~ 35 2020-12-24 21:31:46:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:46:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 176 clock_counter_limit 25, no check, skip. 2020-12-24 21:31:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 24, chip_temp 17 ~ 37, now 128.9s, target 38.5 2020-12-24 21:31:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 24, chip_temp 17 ~ 38, now 129.9s, target 38.6 2020-12-24 21:31:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 24, chip_temp 17 ~ 37, now 130.9s, target 38.8 2020-12-24 21:31:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 25, chip_temp 16 ~ 37, now 131.9s, target 39.0 2020-12-24 21:31:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 24, chip_temp 16 ~ 37, now 132.9s, target 39.1 2020-12-24 21:31:58:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 189 2020-12-24 21:31:58:frequency.c:665:inc_freq_with_fixed_vco: set to 189M, get pcb 10 ~ 24, chip_temp 16 ~ 37 2020-12-24 21:31:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 189 clock_counter_limit 27, no check, skip. 2020-12-24 21:32:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 25, chip_temp 18 ~ 41, now 140.9s, target 40.5 2020-12-24 21:32:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 41 > 40.5 target_temp. 2020-12-24 21:32:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 27, chip_temp 17 ~ 41, now 146.9s, target 41.5 2020-12-24 21:32:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 26, chip_temp 17 ~ 40, now 147.9s, target 41.6 2020-12-24 21:32:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 41, now 148.9s, target 41.8 2020-12-24 21:32:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 43, now 149.9s, target 42.0 2020-12-24 21:32:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 43 > 42.0 target_temp. 2020-12-24 21:32:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 42, now 155.9s, target 43.0 2020-12-24 21:32:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 42, now 156.9s, target 43.2 2020-12-24 21:32:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 17 ~ 42, now 157.9s, target 43.3 2020-12-24 21:32:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 17 ~ 43, now 158.9s, target 43.5 2020-12-24 21:32:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 43, now 159.9s, target 43.7 2020-12-24 21:32:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 43, now 160.9s, target 43.8 2020-12-24 21:32:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 29, chip_temp 17 ~ 42, now 161.9s, target 44.0 2020-12-24 21:32:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 43, now 162.9s, target 44.2 2020-12-24 21:32:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 29, chip_temp 18 ~ 42, now 163.9s, target 44.3 2020-12-24 21:32:29:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 220 2020-12-24 21:32:29:frequency.c:665:inc_freq_with_fixed_vco: set to 220M, get pcb 11 ~ 29, chip_temp 18 ~ 42 2020-12-24 21:32:29:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:32:29:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 220 clock_counter_limit 32, no check, skip. 2020-12-24 21:32:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 30, chip_temp 19 ~ 46, now 172.0s, target 45.7 2020-12-24 21:32:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 45.7 target_temp. 2020-12-24 21:32:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 18 ~ 46, now 178.0s, target 46.7 2020-12-24 21:32:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 47, now 179.0s, target 46.8 2020-12-24 21:32:44:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 46.8 target_temp. 2020-12-24 21:32:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 47, now 185.0s, target 47.8 2020-12-24 21:32:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 47, now 186.0s, target 48.0 2020-12-24 21:32:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 48, now 187.0s, target 48.2 2020-12-24 21:32:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 48, now 188.0s, target 48.3 2020-12-24 21:32:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 19 ~ 47, now 189.0s, target 48.5 2020-12-24 21:32:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 47, now 190.0s, target 48.7 2020-12-24 21:32:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 19 ~ 48, now 191.0s, target 48.8 2020-12-24 21:32:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 18 ~ 49, now 192.0s, target 49.0 2020-12-24 21:32:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 49 > 49.0 target_temp. 2020-12-24 21:33:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 19 ~ 48, now 198.0s, target 50.0 2020-12-24 21:33:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 33, chip_temp 19 ~ 48, now 199.0s, target 50.2 2020-12-24 21:33:04:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 265 2020-12-24 21:33:04:frequency.c:665:inc_freq_with_fixed_vco: set to 265M, get pcb 11 ~ 33, chip_temp 19 ~ 48 2020-12-24 21:33:04:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:33:04:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 265 clock_counter_limit 39, no check, skip. 2020-12-24 21:33:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 33, chip_temp 19 ~ 52, now 207.0s, target 51.5 2020-12-24 21:33:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 52 > 51.5 target_temp. 2020-12-24 21:33:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 19 ~ 52, now 213.0s, target 52.5 2020-12-24 21:33:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 20 ~ 52, now 214.0s, target 52.7 2020-12-24 21:33:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 34, chip_temp 20 ~ 53, now 215.0s, target 52.8 2020-12-24 21:33:20:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 52.8 target_temp. 2020-12-24 21:33:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 36, chip_temp 20 ~ 54, now 221.0s, target 53.8 2020-12-24 21:33:26:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 54 > 53.8 target_temp. 2020-12-24 21:33:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 54, now 227.0s, target 54.8 2020-12-24 21:33:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 36, chip_temp 20 ~ 54, now 228.0s, target 55.0 2020-12-24 21:33:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 54, now 229.0s, target 55.2 2020-12-24 21:33:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 56, now 230.0s, target 55.3 2020-12-24 21:33:35:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 55.3 target_temp. 2020-12-24 21:33:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 21 ~ 55, now 236.0s, target 56.3 2020-12-24 21:33:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 21 ~ 56, now 237.0s, target 56.5 2020-12-24 21:33:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 56, now 238.0s, target 56.7 2020-12-24 21:33:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 38, chip_temp 20 ~ 56, now 239.0s, target 56.8 2020-12-24 21:33:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 38, chip_temp 21 ~ 57, now 240.0s, target 57.0 2020-12-24 21:33:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 38, chip_temp 21 ~ 56, now 241.0s, target 57.2 2020-12-24 21:33:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 38, chip_temp 20 ~ 55, now 242.0s, target 57.3 2020-12-24 21:33:47:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 378 2020-12-24 21:33:47:frequency.c:665:inc_freq_with_fixed_vco: set to 378M, get pcb 13 ~ 38, chip_temp 20 ~ 55 2020-12-24 21:33:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:33:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 378 clock_counter_limit 57, no check, skip. 2020-12-24 21:33:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.406, d1 0.410, d2 0.402, d3 0.406, sum = 1.623291 chain 0 domain 1: d0 0.403, d1 0.391, d2 0.416, d3 0.403, sum = 1.613464 chain 0 domain 2: d0 0.401, d1 0.395, d2 0.402, d3 0.399, sum = 1.598083 chain 0 domain 3: d0 0.405, d1 0.383, d2 0.406, d3 0.398, sum = 1.593323 chain 0 domain 4: d0 0.405, d1 0.393, d2 0.426, d3 0.408, sum = 1.631836 chain 0 domain 5: d0 0.397, d1 0.401, d2 0.393, d3 0.397, sum = 1.588257 chain 0 domain 6: d0 0.397, d1 0.397, d2 0.419, d3 0.404, sum = 1.618042 chain 0 domain 7: d0 0.406, d1 0.392, d2 0.423, d3 0.407, sum = 1.628296 chain 0 domain 8: d0 0.398, d1 0.394, d2 0.418, d3 0.403, sum = 1.613403 chain 0 domain 9: d0 0.402, d1 0.411, d2 0.402, d3 0.405, sum = 1.619934 chain 0 domain 10: d0 0.399, d1 0.392, d2 0.417, d3 0.402, sum = 1.610413 chain 0 domain 11: d0 0.402, d1 0.392, d2 0.392, d3 0.395, sum = 1.580811 chain 0 domain 12: d0 0.388, d1 0.387, d2 0.386, d3 0.387, sum = 1.549011 2020-12-24 21:33:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 12: d0 0.392, d1 0.391, d2 0.390, d3 0.391, sum = 1.563049 2020-12-24 21:33:51:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.404, d1 0.399, d2 0.396, d3 0.399, sum = 1.598328 chain 2 domain 1: d0 0.409, d1 0.404, d2 0.377, d3 0.397, sum = 1.587036 chain 2 domain 2: d0 0.402, d1 0.397, d2 0.404, d3 0.401, sum = 1.603882 chain 2 domain 3: d0 0.405, d1 0.406, d2 0.391, d3 0.401, sum = 1.603333 chain 2 domain 4: d0 0.403, d1 0.396, d2 0.426, d3 0.408, sum = 1.632141 chain 2 domain 5: d0 0.403, d1 0.395, d2 0.417, d3 0.405, sum = 1.619141 chain 2 domain 6: d0 0.396, d1 0.397, d2 0.393, d3 0.395, sum = 1.581421 chain 2 domain 7: d0 0.391, d1 0.386, d2 0.411, d3 0.396, sum = 1.583679 chain 2 domain 8: d0 0.400, d1 0.409, d2 0.398, d3 0.402, sum = 1.609741 chain 2 domain 9: d0 0.398, d1 0.404, d2 0.381, d3 0.394, sum = 1.578003 chain 2 domain 10: d0 0.398, d1 0.406, d2 0.405, d3 0.403, sum = 1.611206 chain 2 domain 11: d0 0.406, d1 0.401, d2 0.405, d3 0.404, sum = 1.614929 chain 2 domain 12: d0 0.391, d1 0.388, d2 0.388, d3 0.389, sum = 1.555481 2020-12-24 21:33:51:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:33:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 40, chip_temp 24 ~ 64, now 251.6s, target 58.9 2020-12-24 21:33:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 58.9 target_temp. 2020-12-24 21:34:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 40, chip_temp 24 ~ 68, now 257.6s, target 59.9 2020-12-24 21:34:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 68 > 59.9 target_temp. 2020-12-24 21:34:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 42, chip_temp 22 ~ 69, now 263.6s, target 60.9 2020-12-24 21:34:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 60.9 target_temp. 2020-12-24 21:34:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 43, chip_temp 24 ~ 73, now 269.6s, target 61.9 2020-12-24 21:34:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 73 > 61.9 target_temp. 2020-12-24 21:34:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 45, chip_temp 24 ~ 72, now 275.6s, target 62.9 2020-12-24 21:34:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 72 > 62.9 target_temp. 2020-12-24 21:34:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 24 ~ 74, now 281.6s, target 63.9 2020-12-24 21:34:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 74 > 63.9 target_temp. 2020-12-24 21:34:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 25 ~ 76, now 287.6s, target 64.9 2020-12-24 21:34:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 76 > 64.9 target_temp. 2020-12-24 21:34:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 49, chip_temp 24 ~ 75, now 293.6s, target 65.9 2020-12-24 21:34:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 75 > 65.9 target_temp. 2020-12-24 21:34:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 50, chip_temp 24 ~ 77, now 299.7s, target 66.9 2020-12-24 21:34:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 66.9 target_temp. 2020-12-24 21:34:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 51, chip_temp 24 ~ 78, now 305.7s, target 67.9 2020-12-24 21:34:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 67.9 target_temp. 2020-12-24 21:34:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 24 ~ 79, now 311.7s, target 68.9 2020-12-24 21:34:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 68.9 target_temp. 2020-12-24 21:35:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 53, chip_temp 25 ~ 78, now 317.7s, target 69.9 2020-12-24 21:35:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 69.9 target_temp. 2020-12-24 21:35:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 52, chip_temp 24 ~ 79, now 323.7s, target 70.9 2020-12-24 21:35:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 70.9 target_temp. 2020-12-24 21:35:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 24 ~ 80, now 329.7s, target 71.9 2020-12-24 21:35:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 71.9 target_temp. 2020-12-24 21:35:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 24 ~ 80, now 335.7s, target 72.9 2020-12-24 21:35:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 72.9 target_temp. 2020-12-24 21:35:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 25 ~ 80, now 341.7s, target 73.9 2020-12-24 21:35:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 73.9 target_temp. 2020-12-24 21:35:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 80, now 347.7s, target 74.9 2020-12-24 21:35:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 74.9 target_temp. 2020-12-24 21:35:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 25 ~ 82, now 353.7s, target 75.9 2020-12-24 21:35:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 75.9 target_temp. 2020-12-24 21:35:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 25 ~ 81, now 359.7s, target 76.9 2020-12-24 21:35:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 76.9 target_temp. 2020-12-24 21:35:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 25 ~ 81, now 365.7s, target 77.9 2020-12-24 21:35:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 77.9 target_temp. 2020-12-24 21:35:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 81, now 371.7s, target 78.9 2020-12-24 21:35:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 78.9 target_temp. 2020-12-24 21:36:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 56, chip_temp 23 ~ 81, now 377.7s, target 79.9 2020-12-24 21:36:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 79.9 target_temp. 2020-12-24 21:36:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 24 ~ 83, now 383.7s, target 80.9 2020-12-24 21:36:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 80.9 target_temp. 2020-12-24 21:36:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 25 ~ 82, now 389.7s, target 81.9 2020-12-24 21:36:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 81.9 target_temp. 2020-12-24 21:36:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 24 ~ 81, now 395.7s, target 83.0 2020-12-24 21:36:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 25 ~ 82, now 396.7s, target 83.1 2020-12-24 21:36:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 80, now 397.7s, target 83.3 2020-12-24 21:36:23:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 441 2020-12-24 21:36:23:frequency.c:665:inc_freq_with_fixed_vco: set to 441M, get pcb 14 ~ 55, chip_temp 24 ~ 80 2020-12-24 21:36:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:36:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 441 clock_counter_limit 67, no check, skip. 2020-12-24 21:36:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.403, d1 0.411, d2 0.385, d3 0.400, sum = 1.598816 chain 0 domain 1: d0 0.409, d1 0.393, d2 0.406, d3 0.402, sum = 1.610107 2020-12-24 21:36:26:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.408, d1 0.411, d2 0.385, d3 0.401, sum = 1.606323 chain 1 domain 12: d0 0.391, d1 0.388, d2 0.389, d3 0.389, sum = 1.557068 2020-12-24 21:36:27:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.406, d1 0.412, d2 0.387, d3 0.402, sum = 1.606995 chain 2 domain 1: d0 0.402, d1 0.398, d2 0.418, d3 0.406, sum = 1.624634 chain 2 domain 2: d0 0.408, d1 0.396, d2 0.400, d3 0.401, sum = 1.605652 chain 2 domain 3: d0 0.402, d1 0.395, d2 0.408, d3 0.401, sum = 1.605103 chain 2 domain 4: d0 0.410, d1 0.394, d2 0.391, d3 0.398, sum = 1.593079 chain 2 domain 5: d0 0.409, d1 0.391, d2 0.419, d3 0.406, sum = 1.625305 chain 2 domain 6: d0 0.402, d1 0.388, d2 0.385, d3 0.392, sum = 1.567383 chain 2 domain 7: d0 0.391, d1 0.377, d2 0.380, d3 0.378, sum = 1.525635 chain 2 domain 8: d0 0.400, d1 0.405, d2 0.374, d3 0.393, sum = 1.571045 chain 2 domain 9: d0 0.405, d1 0.387, d2 0.401, d3 0.398, sum = 1.591003 chain 2 domain 10: d0 0.395, d1 0.399, d2 0.401, d3 0.398, sum = 1.593384 chain 2 domain 11: d0 0.408, d1 0.402, d2 0.401, d3 0.404, sum = 1.614868 chain 2 domain 12: d0 0.392, d1 0.389, d2 0.388, d3 0.390, sum = 1.558594 2020-12-24 21:36:27:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:36:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 57, chip_temp 26 ~ 85, now 407.3s, target 84.9 2020-12-24 21:36:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 84.9 target_temp. 2020-12-24 21:36:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 26 ~ 86, now 413.3s, target 85.9 2020-12-24 21:36:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 85.9 target_temp. 2020-12-24 21:36:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 26 ~ 88, now 419.3s, target 86.9 2020-12-24 21:36:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 88 > 86.9 target_temp. 2020-12-24 21:36:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 57, chip_temp 26 ~ 90, now 425.3s, target 87.9 2020-12-24 21:36:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 90 > 87.9 target_temp. 2020-12-24 21:36:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 58, chip_temp 27 ~ 90, now 431.3s, target 88.9 2020-12-24 21:36:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 90 > 88.9 target_temp. 2020-12-24 21:37:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 60, chip_temp 26 ~ 91, now 437.3s, target 89.9 2020-12-24 21:37:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 91 > 89.9 target_temp. 2020-12-24 21:37:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 61, chip_temp 28 ~ 93, now 443.3s, target 90.9 2020-12-24 21:37:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 93 > 90.9 target_temp. 2020-12-24 21:37:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 60, chip_temp 25 ~ 92, now 449.3s, target 91.9 2020-12-24 21:37:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 92 > 91.9 target_temp. 2020-12-24 21:37:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 60, chip_temp 26 ~ 94, now 455.4s, target 92.9 2020-12-24 21:37:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 94 > 92.9 target_temp. 2020-12-24 21:37:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 63, chip_temp 26 ~ 92, now 461.4s, target 93.9 2020-12-24 21:37:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 62, chip_temp 27 ~ 92, now 462.4s, target 94.1 2020-12-24 21:37:28:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 530 2020-12-24 21:37:28:frequency.c:665:inc_freq_with_fixed_vco: set to 530M, get pcb 16 ~ 62, chip_temp 27 ~ 92 2020-12-24 21:37:28:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-12-24 21:37:41:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. 2020-12-24 21:37:41:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.387, d1 0.381, d2 0.387, d3 0.379, sum = 1.534546 chain 1 domain 1: d0 0.399, d1 0.398, d2 0.398, d3 0.398, sum = 1.592285 chain 1 domain 2: d0 0.400, d1 0.387, d2 0.395, d3 0.394, sum = 1.576477 chain 1 domain 3: d0 0.384, d1 0.391, d2 0.387, d3 0.363, sum = 1.524963 chain 1 domain 4: d0 0.383, d1 0.380, d2 0.381, d3 0.352, sum = 1.496338 chain 1 domain 5: d0 0.379, d1 0.372, d2 0.374, d3 0.366, sum = 1.490417 chain 1 domain 6: d0 0.380, d1 0.388, d2 0.377, d3 0.351, sum = 1.495239 chain 1 domain 7: d0 0.377, d1 0.370, d2 0.368, d3 0.372, sum = 1.487610 chain 1 domain 8: d0 0.372, d1 0.369, d2 0.384, d3 0.364, sum = 1.488770 chain 1 domain 9: d0 0.379, d1 0.372, d2 0.370, d3 0.371, sum = 1.492126 chain 1 domain 10: d0 0.374, d1 0.371, d2 0.388, d3 0.362, sum = 1.494934 chain 1 domain 11: d0 0.381, d1 0.378, d2 0.373, d3 0.361, sum = 1.492737 chain 1 domain 12: d0 0.372, d1 0.369, d2 0.370, d3 0.371, sum = 1.482605 2020-12-24 21:37:42:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.384, d1 0.380, d2 0.394, d3 0.340, sum = 1.497681 chain 2 domain 1: d0 0.390, d1 0.386, d2 0.366, d3 0.353, sum = 1.494629 chain 2 domain 2: d0 0.388, d1 0.394, d2 0.365, d3 0.382, sum = 1.528442 chain 2 domain 3: d0 0.388, d1 0.386, d2 0.359, d3 0.378, sum = 1.510742 chain 2 domain 4: d0 0.385, d1 0.393, d2 0.369, d3 0.349, sum = 1.496643 chain 2 domain 5: d0 0.382, d1 0.374, d2 0.377, d3 0.376, sum = 1.508118 chain 2 domain 6: d0 0.375, d1 0.382, d2 0.382, d3 0.349, sum = 1.488159 chain 2 domain 7: d0 0.367, d1 0.361, d2 0.369, d3 0.366, sum = 1.463806 chain 2 domain 8: d0 0.372, d1 0.374, d2 0.379, d3 0.363, sum = 1.488708 chain 2 domain 9: d0 0.386, d1 0.377, d2 0.387, d3 0.345, sum = 1.495544 chain 2 domain 10: d0 0.378, d1 0.372, d2 0.374, d3 0.375, sum = 1.499146 chain 2 domain 11: d0 0.389, d1 0.381, d2 0.399, d3 0.390, sum = 1.559998 chain 2 domain 12: d0 0.373, d1 0.371, d2 0.371, d3 0.372, sum = 1.486633 2020-12-24 21:37:42:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:37:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:37:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 530 clock_counter_limit 81, no check, skip. 2020-12-24 21:37:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.381, d1 0.386, d2 0.403, d3 0.390, sum = 1.559570 chain 0 domain 1: d0 0.380, d1 0.385, d2 0.366, d3 0.361, sum = 1.491882 chain 0 domain 2: d0 0.385, d1 0.374, d2 0.373, d3 0.364, sum = 1.495483 chain 0 domain 3: d0 0.380, d1 0.371, d2 0.376, d3 0.365, sum = 1.492310 chain 0 domain 4: d0 0.385, d1 0.374, d2 0.379, d3 0.359, sum = 1.496399 chain 0 domain 5: d0 0.378, d1 0.383, d2 0.390, d3 0.346, sum = 1.497620 chain 0 domain 6: d0 0.380, d1 0.372, d2 0.374, d3 0.365, sum = 1.489929 chain 0 domain 7: d0 0.386, d1 0.368, d2 0.367, d3 0.371, sum = 1.491760 chain 0 domain 8: d0 0.377, d1 0.385, d2 0.379, d3 0.353, sum = 1.493591 chain 0 domain 9: d0 0.388, d1 0.376, d2 0.389, d3 0.343, sum = 1.496094 chain 0 domain 10: d0 0.384, d1 0.378, d2 0.362, d3 0.368, sum = 1.490845 chain 0 domain 11: d0 0.380, d1 0.385, d2 0.362, d3 0.366, sum = 1.493591 chain 0 domain 12: d0 0.369, d1 0.368, d2 0.367, d3 0.369, sum = 1.472595 2020-12-24 21:37:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.388, d1 0.394, d2 0.368, d3 0.355, sum = 1.504028 chain 1 domain 1: d0 0.398, d1 0.388, d2 0.411, d3 0.399, sum = 1.594849 chain 1 domain 2: d0 0.399, d1 0.387, d2 0.377, d3 0.387, sum = 1.550110 chain 1 domain 3: d0 0.387, d1 0.383, d2 0.370, d3 0.375, sum = 1.514893 chain 1 domain 4: d0 0.383, d1 0.379, d2 0.387, d3 0.355, sum = 1.504761 chain 1 domain 5: d0 0.379, d1 0.372, d2 0.374, d3 0.365, sum = 1.490784 chain 1 domain 6: d0 0.380, d1 0.379, d2 0.395, d3 0.357, sum = 1.511902 chain 1 domain 7: d0 0.378, d1 0.371, d2 0.372, d3 0.366, sum = 1.487000 chain 1 domain 8: d0 0.374, d1 0.372, d2 0.370, d3 0.370, sum = 1.486511 chain 1 domain 9: d0 0.383, d1 0.371, d2 0.384, d3 0.367, sum = 1.506287 chain 1 domain 10: d0 0.380, d1 0.369, d2 0.378, d3 0.362, sum = 1.488892 chain 1 domain 11: d0 0.382, d1 0.377, d2 0.374, d3 0.361, sum = 1.494202 chain 1 domain 12: d0 0.372, d1 0.369, d2 0.370, d3 0.370, sum = 1.481140 2020-12-24 21:37:46:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.385, d1 0.392, d2 0.374, d3 0.360, sum = 1.511475 chain 2 domain 1: d0 0.391, d1 0.376, d2 0.383, d3 0.383, sum = 1.534241 chain 2 domain 2: d0 0.383, d1 0.377, d2 0.389, d3 0.355, sum = 1.504578 chain 2 domain 3: d0 0.382, d1 0.374, d2 0.396, d3 0.384, sum = 1.536682 chain 2 domain 4: d0 0.381, d1 0.384, d2 0.382, d3 0.350, sum = 1.496094 chain 2 domain 5: d0 0.387, d1 0.371, d2 0.399, d3 0.341, sum = 1.497864 chain 2 domain 6: d0 0.376, d1 0.373, d2 0.370, d3 0.372, sum = 1.490417 chain 2 domain 7: d0 0.372, d1 0.360, d2 0.372, d3 0.356, sum = 1.460205 chain 2 domain 8: d0 0.374, d1 0.369, d2 0.384, d3 0.370, sum = 1.496521 chain 2 domain 9: d0 0.381, d1 0.368, d2 0.376, d3 0.366, sum = 1.491089 chain 2 domain 10: d0 0.384, d1 0.381, d2 0.354, d3 0.372, sum = 1.491394 chain 2 domain 11: d0 0.386, d1 0.382, d2 0.396, d3 0.388, sum = 1.551392 chain 2 domain 12: d0 0.372, d1 0.370, d2 0.370, d3 0.371, sum = 1.482605 2020-12-24 21:37:46:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:37:46:frequency.c:717:inc_freq_with_fixed_step: chain = 0, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:46:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 535 clock_counter_limit 82, no check, skip. 2020-12-24 21:37:48:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 540 clock_counter_limit 83, no check, skip. 2020-12-24 21:37:50:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 535 clock_counter_limit 82, no check, skip. 2020-12-24 21:37:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 540 clock_counter_limit 83, no check, skip. 2020-12-24 21:37:54:frequency.c:717:inc_freq_with_fixed_step: chain = 0, freq_start = 540, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:54:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 540, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:54:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1950, step by step. 2020-12-24 21:38:06:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.378, d1 0.384, d2 0.353, d3 0.376, sum = 1.490723 chain 0 domain 1: d0 0.376, d1 0.377, d2 0.363, d3 0.375, sum = 1.491699 chain 0 domain 2: d0 0.374, d1 0.381, d2 0.354, d3 0.362, sum = 1.470337 chain 0 domain 3: d0 0.371, d1 0.363, d2 0.363, d3 0.370, sum = 1.465454 chain 0 domain 4: d0 0.373, d1 0.369, d2 0.373, d3 0.368, sum = 1.483276 chain 0 domain 5: d0 0.370, d1 0.365, d2 0.363, d3 0.384, sum = 1.482361 chain 0 domain 6: d0 0.372, d1 0.378, d2 0.359, d3 0.355, sum = 1.462646 chain 0 domain 7: d0 0.374, d1 0.374, d2 0.366, d3 0.349, sum = 1.463135 chain 0 domain 8: d0 0.369, d1 0.363, d2 0.380, d3 0.350, sum = 1.461731 chain 0 domain 9: d0 0.378, d1 0.360, d2 0.371, d3 0.381, sum = 1.489319 chain 0 domain 10: d0 0.369, d1 0.376, d2 0.374, d3 0.351, sum = 1.470337 chain 0 domain 11: d0 0.373, d1 0.378, d2 0.370, d3 0.362, sum = 1.482605 chain 0 domain 12: d0 0.360, d1 0.358, d2 0.357, d3 0.358, sum = 1.434143 2020-12-24 21:38:06:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.383, d1 0.370, d2 0.367, d3 0.378, sum = 1.497375 chain 1 domain 1: d0 0.388, d1 0.381, d2 0.380, d3 0.383, sum = 1.530823 chain 1 domain 2: d0 0.383, d1 0.377, d2 0.383, d3 0.378, sum = 1.520691 chain 1 domain 3: d0 0.371, d1 0.377, d2 0.371, d3 0.355, sum = 1.473389 chain 1 domain 4: d0 0.376, d1 0.378, d2 0.369, d3 0.361, sum = 1.483948 chain 1 domain 5: d0 0.370, d1 0.364, d2 0.363, d3 0.364, sum = 1.460449 chain 1 domain 6: d0 0.370, d1 0.369, d2 0.372, d3 0.361, sum = 1.471741 chain 1 domain 7: d0 0.367, d1 0.362, d2 0.359, d3 0.361, sum = 1.449097 chain 1 domain 8: d0 0.364, d1 0.362, d2 0.362, d3 0.363, sum = 1.451599 chain 1 domain 9: d0 0.369, d1 0.365, d2 0.366, d3 0.368, sum = 1.467834 chain 1 domain 10: d0 0.364, d1 0.362, d2 0.362, d3 0.384, sum = 1.472107 chain 1 domain 11: d0 0.372, d1 0.364, d2 0.367, d3 0.369, sum = 1.472961 chain 1 domain 12: d0 0.363, d1 0.360, d2 0.360, d3 0.362, sum = 1.444519 2020-12-24 21:38:07:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.375, d1 0.383, d2 0.379, d3 0.350, sum = 1.487793 chain 2 domain 1: d0 0.376, d1 0.382, d2 0.358, d3 0.380, sum = 1.496216 chain 2 domain 2: d0 0.375, d1 0.370, d2 0.388, d3 0.355, sum = 1.487549 chain 2 domain 3: d0 0.372, d1 0.365, d2 0.371, d3 0.378, sum = 1.485901 chain 2 domain 4: d0 0.373, d1 0.369, d2 0.370, d3 0.381, sum = 1.492249 chain 2 domain 5: d0 0.372, d1 0.364, d2 0.375, d3 0.360, sum = 1.471802 chain 2 domain 6: d0 0.368, d1 0.362, d2 0.361, d3 0.386, sum = 1.477905 chain 2 domain 7: d0 0.359, d1 0.354, d2 0.350, d3 0.391, sum = 1.454773 chain 2 domain 8: d0 0.365, d1 0.363, d2 0.379, d3 0.349, sum = 1.455872 chain 2 domain 9: d0 0.369, d1 0.376, d2 0.376, d3 0.351, sum = 1.472229 chain 2 domain 10: d0 0.370, d1 0.378, d2 0.360, d3 0.360, sum = 1.467285 chain 2 domain 11: d0 0.378, d1 0.385, d2 0.379, d3 0.348, sum = 1.489929 chain 2 domain 12: d0 0.363, d1 0.361, d2 0.361, d3 0.362, sum = 1.447632 2020-12-24 21:38:07:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:38:07:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5 2020-12-24 21:38:16:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5 2020-12-24 21:38:24:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 2, start = 530, freq_step = 5 2020-12-24 21:38:31:driver-btm-api.c:666:set_timeout: freq = 600, percent = 90, hcn = 707788, timeout = 1178 2020-12-24 21:38:31:frequency.c:1026:check_initial_temperature_status: vol_higher= 1910, vol_limit = 1960 when max freq = 600, bringup temp = 8 2020-12-24 21:38:31:power_api.c:278:set_higher_voltage_raw: higher_voltage_raw = 1910 2020-12-24 21:38:31:power_api.c:370:set_to_higher_voltage_by_steps: Set to voltage raw 1910, step by step. 2020-12-24 21:38:41:thread.c:1533:create_check_system_status_thread: create thread 2020-12-24 21:38:41:thread.c:1508:create_asic_status_monitor_thread: create thread 2020-12-24 21:38:41:driver-btm-api.c:2599:bitmain_soc_init: Init done! 2020-12-24 21:38:46:driver-btm-api.c:247:set_miner_status: STATUS_OKAY 2020-12-24 21:38:47:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 51242 2020-12-24 21:38:47:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 50000 2020-12-24 21:38:51:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8 2020-12-24 21:38:51:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1608845931, block_ntime 1608845901 2020-12-24 22:09:14:thread.c:234:calc_hashrate_avg: avg rate is 51385.73 in 30 mins 2020-12-24 22:09:14:temperature.c:440:temp_statistics_show: pcb temp 15~67 chip temp 26~90 2020-12-24 22:09:14:thread.c:303:is_temp_reopen_core: current PCB min temperature(15) is too low, <= 15 2020-12-24 22:10:51:thread.c:849:check_temperature: over max temp, pcb temp 68 (max 80), chip temp 99(max 98) 2020-12-24 22:10:51:driver-btm-api.c:247:set_miner_status: ERROR_TEMP_TOO_HIGH 2020-12-24 22:10:51:driver-btm-api.c:176:stop_mining: stop mining: over max temp 2020-12-24 22:10:51:thread.c:1575:cancel_temperature_monitor_thread: cancel thread 2020-12-24 22:10:51:thread.c:1606:cancel_check_system_status_thread: cancel thread 2020-12-24 22:10:51:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread 2020-12-24 22:10:51:thread.c:1616:cancel_asic_status_monitor_thread: cancel thread 2020-12-24 22:10:51:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****
full log: https://paste.ubuntu.com/p/7JxvWyH2TY/
|
|
|
Hello there is any method for make m21s online, so if i not be at place of asic, i can check logs etc using remote...
Thanks.
|
|
|
hello
currently i have few t17e and they need lot of work for check hashboard broken or i lost hashboard and need to send to repair
i want switch to m21s, its stable or its like t17e hot and unstable?
can anyone tell me?
Thanks
|
|
|
Hello when i turn on my T17e, first lamp green and red both is light. after short time both going off. i checked pool setting is fine. and i have below error: kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: Reserved 16 MiB at 0x0e000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 61440 [ 0.000000] free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 61440 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 [ 0.000000] pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 [ 0.000000] Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 190864K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 38512K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc090c424 (9234 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) [ 0.000000] .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] efuse mapped to cf800000 [ 0.000000] ps7-slcr mapped to cf802000 [ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 [ 0.000000] zynq_clock_init: clkc starts at cf802100 [ 0.000000] Zynq clock init [ 0.000011] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns [ 0.000030] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns [ 0.000055] Switching to timer-based delay loop, resolution 3ns [ 0.000291] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns [ 0.000317] ps7-ttc #0 at cf80a000, irq=18 [ 0.000553] Console: colour dummy device 80x30 [ 0.000568] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) [ 0.000582] pid_max: default: 32768 minimum: 301 [ 0.000711] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000722] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001326] CPU: Testing write buffer coherency: ok [ 0.001525] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001579] Setting up static identity map for 0x100000 - 0x100058 [ 0.100278] CPU1: failed to boot: -1 [ 0.100309] Brought up 1 CPUs [ 0.100318] SMP: Total of 1 processors activated (666.66 BogoMIPS). [ 0.100324] CPU: All CPU(s) started in SVC mode. [ 0.101114] devtmpfs: initialized [ 0.103194] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.103630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.104579] pinctrl core: initialized pinctrl subsystem [ 0.105679] NET: Registered protocol family 16 [ 0.107356] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.150231] cpuidle: using governor menu [ 0.159157] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.159167] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.159312] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 [ 0.211342] vgaarb: loaded [ 0.211696] SCSI subsystem initialized [ 0.211981] usbcore: registered new interface driver usbfs [ 0.212050] usbcore: registered new interface driver hub [ 0.212483] usbcore: registered new device driver usb [ 0.213020] media: Linux media interface: v0.10 [ 0.213132] Linux video capture interface: v2.00 [ 0.213289] pps_core: LinuxPPS API ver. 1 registered [ 0.213297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.213380] PTP clock support registered [ 0.213559] EDAC MC: Ver: 3.0.0 [ 0.220615] Advanced Linux Sound Architecture Driver Initialized. [ 0.230574] clocksource: Switched to clocksource arm_global_timer [ 0.249595] NET: Registered protocol family 2 [ 0.250779] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.250816] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.250861] TCP: Hash tables configured (established 2048 bind 2048) [ 0.250907] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.250934] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.251139] NET: Registered protocol family 1 [ 0.261473] RPC: Registered named UNIX socket transport module. [ 0.261481] RPC: Registered udp transport module. [ 0.261486] RPC: Registered tcp transport module. [ 0.261491] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.261514] PCI: CLS 0 bytes, default 64 [ 0.261739] Trying to unpack rootfs image as initramfs... [ 0.262344] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.370519] Freeing initrd memory: 25472K (cc220000 - cdb00000) [ 0.370965] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.372747] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.384465] workingset: timestamp_bits=28 max_order=16 bucket_order=0 [ 0.395307] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.396437] io scheduler noop registered [ 0.396453] io scheduler deadline registered [ 0.396484] io scheduler cfq registered (default) [ 0.398161] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 [ 0.398176] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.399341] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps [ 0.903363] console [ttyPS0] enabled [ 0.906240] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [ 0.912404] [drm] Initialized drm 1.1.0 20060810 [ 1.090024] brd: module loaded [ 1.178943] loop: module loaded [ 1.185771] CAN device driver interface [ 1.189957] gpiod_set_value: invalid GPIO [ 1.193684] libphy: MACB_mii_bus: probed [ 1.270655] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) [ 1.279100] Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) [ 1.289399] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.293942] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.299820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305448] ehci-pci: EHCI PCI platform driver [ 1.308755] usbcore: registered new interface driver usb-storage [ 1.315307] mousedev: PS/2 mouse device common for all mice [ 1.330682] i2c /dev entries driver [ 1.335755] Xilinx Zynq CpuIdle Driver started [ 1.340097] sdhci: Secure Digital Host Controller Interface driver [ 1.344997] sdhci: Copyright(c) Pierre Ossman [ 1.347973] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.391719] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.398627] ledtrig-cpu: registered to indicate activity on CPUs [ 1.403900] usbcore: registered new interface driver usbhid [ 1.408077] usbhid: USB HID core driver [ 1.411965] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.416931] nand: Micron MT29F2G08ABAGAWP [ 1.419625] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.426260] nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip [ 1.436411] Bad block table found at page 131008, version 0x01 [ 1.441367] Bad block table found at page 130944, version 0x01 [ 1.446139] 6 ofpart partitions found on MTD device pl35x-nand [ 1.450650] Creating 6 MTD partitions on "pl35x-nand": [ 1.454400] 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" [ 1.471112] 0x000002800000-0x000004800000 : "ramfs" [ 1.486121] 0x000004800000-0x000005000000 : "configs" [ 1.501214] 0x000005000000-0x000006000000 : "reserve" [ 1.516326] 0x000006000000-0x000008000000 : "ramfs-bak" [ 1.531743] 0x000008000000-0x000010000000 : "reserve1" [ 1.550703] NET: Registered protocol family 10 [ 1.565303] sit: IPv6 over IPv4 tunneling driver [ 1.569510] NET: Registered protocol family 17 [ 1.572816] can: controller area network core (rev 20120528 abi 9) [ 1.577658] NET: Registered protocol family 29 [ 1.580793] can: raw protocol (rev 20120528) [ 1.583693] can: broadcast manager protocol (rev 20120528 t) [ 1.588040] can: netlink gateway (rev 20130117) max_hops=1 [ 1.592505] zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' [ 1.598334] zynq_pm_late_init: Unable to map DDRC IO memory. [ 1.602900] Registering SWP/SWPB emulation handler [ 1.608238] hctosys: unable to open rtc device (rtc0) [ 1.612491] ALSA device list: [ 1.614070] No soundcards found. [ 1.616530] RAMDISK: gzip image found at block 0 [ 4.353586] EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities [ 4.370868] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended [ 4.377936] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) [ 4.383700] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 4.388579] devtmpfs: mounted [ 4.391446] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 4.578494] EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr [ 4.606151] random: dd urandom read with 0 bits of entropy available [ 4.655376] ubi0: attaching mtd2 [ 4.687750] ubi0: scanning is finished [ 4.696724] ubi0: attached mtd2 (name "configs", size 8 MiB) [ 4.701285] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.706773] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.712289] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.717884] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 [ 4.722524] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.728389] ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 3745532542 [ 4.736340] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 [ 4.744140] ubi0: background thread "ubi_bgt0d" started, PID 708 [ 4.760624] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 [ 4.792734] UBIFS (ubi0:0): recovery needed [ 4.872878] UBIFS (ubi0:0): recovery completed [ 4.875932] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" [ 4.882139] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.890724] UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) [ 4.899366] UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) [ 4.904350] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 3E2BC2EA-ECA1-4E91-BF05-322AFDAF11A7, small LPT model [ 4.937439] ubi1: attaching mtd5 [ 5.422949] ubi1: scanning is finished [ 5.433173] ubi1: attached mtd5 (name "reserve1", size 128 MiB) [ 5.437709] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.443427] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.448827] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.454515] ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 [ 5.459243] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.465184] ubi1: max/mean erase counter: 4177/1955, WL threshold: 4096, image sequence number: 614900815 [ 5.473425] ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 [ 5.481420] ubi1: background thread "ubi_bgt1d" started, PID 720 [ 5.499316] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 [ 5.532742] UBIFS (ubi1:0): recovery needed [ 5.640503] UBIFS (ubi1:0): recovery completed [ 5.643592] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" [ 5.649815] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 5.658426] UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) [ 5.667707] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.673005] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model [ 6.399945] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.429286] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.270713] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz [ 7.277509] macb e000b000.ethernet eth0: link up (100/Full) [ 7.282124] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.719565] In axi fpga driver! [ 33.722769] request_mem_region OK! [ 33.726105] AXI fpga dev virtual address is 0xcfb38000 [ 33.731644] *base_vir_addr = 0xb023 [ 33.745749] In fpga mem driver! [ 33.749155] request_mem_region OK! [ 33.753076] fpga mem virtual address is 0xd2000000 2020-10-20 19:13:57 Read tune config: tune_profile=-1, tune_status=0, tune_frequency=0, tune_voltage=0, tune_freq_step=25, tune_volt_step=10, tune_max_frequency=0, tune_power=0, tune_bad_domains_threshold=3, tune_max_voltage=2100, tune_freq_yellow_step=10, tune_max_restarts=10, tune_restarts=0, voltage_increase=0, voltage_pre_heat_delay=30, tune_decrease_voltage_mode=-1, tune_uptime=120, tune_chain_statuses=0, tune_bad_freq_step=25 2020-10-20 19:13:57 driver/driver-btm-api.c:278:init_freq_mode: This is scan-user version 2020-10-20 19:13:57 driver/driver-btm-api.c:1990:bitmain_soc_init: opt_multi_version = 1 2020-10-20 19:13:57 driver/driver-btm-api.c:1991:bitmain_soc_init: opt_bitmain_ab = 1 2020-10-20 19:13:57 driver/driver-btm-api.c:1992:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-10-20 19:13:57 driver/driver-btm-api.c:1993:bitmain_soc_init: Miner compile time: Fri Apr 3 15:42:04 UTC 2020 type: Antminer T17E Hiveon 2020-10-20 19:13:57 driver/driver-btm-api.c:1995:bitmain_soc_init: commit version: 3f36039 2020-04-01 16:04:28, build by: user 2020-04-01 19:40:06 2020-10-20 19:13:57 driver/driver-btm-api.c:1636:show_sn: no SN got, please write SN to /nvdata/sn 2020-10-20 19:13:57 driver/fan.c:211:front_fan_power_on: Note: front fan is power on! 2020-10-20 19:13:57 driver/fan.c:217:rear_fan_power_on: Note: rear fan is power on! 2020-10-20 19:13:57 driver/driver-btm-api.c:1690:miner_device_init: Detect 256MB control board of XILINX 2020-10-20 19:13:57 driver/driver-btm-api.c:1664:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-10-20 19:14:03 driver/driver-btm-api.c:1315:init_miner_version: miner ID : 802c64c42b104814 2020-10-20 19:14:03 driver/driver-btm-api.c:1320:init_miner_version: FPGA Version = 0xB023 2020-10-20 19:14:08 driver/thread.c:1671:create_read_nonce_reg_thread: create thread 2020-10-20 19:14:08 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[0] = 1 2020-10-20 19:14:08 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[1] = 1 2020-10-20 19:14:08 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[2] = 1 2020-10-20 19:14:08 driver/driver-btm-api.c:1392:bitmain_board_init: project:3 2020-10-20 19:14:08 driver/driver-btm-api.c:1427:bitmain_board_init: ERROR: Unkown project type. 2020-10-20 19:14:08 driver/driver-btm-api.c:1450:bitmain_board_init: Project type: Antminer Unknown 2020-10-20 19:14:08 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a 2020-10-20 19:14:08 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-10-20 19:14:08 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a 2020-10-20 19:14:08 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-10-20 19:14:08 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a 2020-10-20 19:14:08 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-10-20 19:14:10 driver/driver-btm-api.c:1489:bitmain_board_init: Fan check passed. 2020-10-20 19:14:10 driver/board.c:31:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-10-20 19:14:15 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-10-20 19:14:15 driver/board.c:31:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-10-20 19:14:19 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-10-20 19:14:20 driver/board.c:31:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-10-20 19:14:24 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-10-20 19:14:24 driver/thread.c:1666:create_pic_heart_beat_thread: create thread 2020-10-20 19:14:24 driver/power_api.c:191:power_init: power init ... 2020-10-20 19:14:26 driver/power_api.c:265:power_init: highest_voltage = 20.000000 2020-10-20 19:14:26 driver/power_api.c:266:power_init: working_voltage = 18.000000 2020-10-20 19:14:26 driver/power_api.c:267:power_init: higher_voltage = 18.500000 2020-10-20 19:14:26 driver/power_api.c:270:power_init: check_asic_voltage = 18.000000 2020-10-20 19:14:26 driver/driver-btm-api.c:1500:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-10-20 19:14:26 driver/power_api.c:177:power_off: init gpio907 2020-10-20 19:14:58 driver/power_api.c:461:set_to_check_asic_voltage: setting to voltage: 18.00 ... 2020-10-20 19:15:00 driver/power_api.c:571:check_voltage_multi: retry time: 0 2020-10-20 19:15:01 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.542388 2020-10-20 19:15:01 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.54, more than 0.5v diff. 2020-10-20 19:15:02 driver/power_api.c:571:check_voltage_multi: retry time: 1 2020-10-20 19:15:04 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:04 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:05 driver/power_api.c:571:check_voltage_multi: retry time: 2 2020-10-20 19:15:07 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517647 2020-10-20 19:15:07 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:08 driver/power_api.c:571:check_voltage_multi: retry time: 3 2020-10-20 19:15:10 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:10 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:11 driver/power_api.c:571:check_voltage_multi: retry time: 4 2020-10-20 19:15:13 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:15:13 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:14 driver/power_api.c:571:check_voltage_multi: retry time: 5 2020-10-20 19:15:15 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517668 2020-10-20 19:15:15 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:16 driver/power_api.c:571:check_voltage_multi: retry time: 6 2020-10-20 19:15:18 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:15:18 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:19 driver/power_api.c:571:check_voltage_multi: retry time: 7 2020-10-20 19:15:21 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:15:21 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:22 driver/power_api.c:571:check_voltage_multi: retry time: 8 2020-10-20 19:15:24 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517647 2020-10-20 19:15:24 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:25 driver/power_api.c:571:check_voltage_multi: retry time: 9 2020-10-20 19:15:27 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517895 2020-10-20 19:15:27 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:28 driver/power_api.c:571:check_voltage_multi: retry time: 10 2020-10-20 19:15:29 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:15:29 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:30 driver/power_api.c:571:check_voltage_multi: retry time: 11 2020-10-20 19:15:32 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:32 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:33 driver/power_api.c:571:check_voltage_multi: retry time: 12 2020-10-20 19:15:35 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:35 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:36 driver/power_api.c:571:check_voltage_multi: retry time: 13 2020-10-20 19:15:38 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:38 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:39 driver/power_api.c:571:check_voltage_multi: retry time: 14 2020-10-20 19:15:41 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517895 2020-10-20 19:15:41 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:42 driver/power_api.c:571:check_voltage_multi: retry time: 15 2020-10-20 19:15:43 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517895 2020-10-20 19:15:43 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:44 driver/power_api.c:571:check_voltage_multi: retry time: 16 2020-10-20 19:15:46 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:46 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:47 driver/power_api.c:571:check_voltage_multi: retry time: 17 2020-10-20 19:15:49 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:49 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:50 driver/power_api.c:571:check_voltage_multi: retry time: 18 2020-10-20 19:15:52 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:15:52 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:53 driver/power_api.c:571:check_voltage_multi: retry time: 19 2020-10-20 19:15:54 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517874 2020-10-20 19:15:54 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:55 driver/power_api.c:571:check_voltage_multi: retry time: 20 2020-10-20 19:15:57 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517874 2020-10-20 19:15:57 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:15:58 driver/power_api.c:571:check_voltage_multi: retry time: 21 2020-10-20 19:16:00 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517668 2020-10-20 19:16:00 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:01 driver/power_api.c:571:check_voltage_multi: retry time: 22 2020-10-20 19:16:03 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:16:03 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:04 driver/power_api.c:571:check_voltage_multi: retry time: 23 2020-10-20 19:16:06 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:16:06 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:07 driver/power_api.c:571:check_voltage_multi: retry time: 24 2020-10-20 19:16:08 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:16:08 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:09 driver/power_api.c:571:check_voltage_multi: retry time: 25 2020-10-20 19:16:11 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:16:11 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:12 driver/power_api.c:571:check_voltage_multi: retry time: 26 2020-10-20 19:16:14 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517875 2020-10-20 19:16:14 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:15 driver/power_api.c:571:check_voltage_multi: retry time: 27 2020-10-20 19:16:17 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517895 2020-10-20 19:16:17 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:18 driver/power_api.c:571:check_voltage_multi: retry time: 28 2020-10-20 19:16:20 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.518102 2020-10-20 19:16:20 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:21 driver/power_api.c:571:check_voltage_multi: retry time: 29 2020-10-20 19:16:22 driver/power_api.c:539:_get_avg_voltage: average voltage = 0.517895 2020-10-20 19:16:22 driver/power_api.c:552:check_voltage: target_vol = 18.00, actural_vol = 0.52, more than 0.5v diff. 2020-10-20 19:16:23 driver/driver-btm-api.c:204:set_miner_status: ERROR_POWER_LOST 2020-10-20 19:16:26 driver/driver-btm-api.c:717:killall_hashboard: ****power off hashboard**** 2020-10-20 19:16:26 driver/driver-btm-api.c:157:stop_mining: stop mining: power set failed! 2020-10-20 19:16:26 driver/thread.c:1732:cancel_read_nonce_reg_thread: cancel thread [/quote]
Miner log:
[quote]Mem: 149556K used, 84188K free, 0K shrd, 643288K buff, 643332K cached CPU: 0% usr 0% sys 0% nic 100% idle 0% io 0% irq 0% sirq Load average: 0.10 0.10 0.05 1/93 3473 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 1055 1054 root S < 63488 27% 0% /usr/bin/bmminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf 1070 1 root S 4032 2% 0% perl /sbin/watchdog.pl 1344 1342 root S 3948 2% 0% {agent} /hive/sbin/bash /hive/bin/agent 1347 1 root S 3908 2% 0% {controller} /hive/sbin/bash /hive/bin/controller 938 1 root S 3328 1% 0% /usr/bin/ntpd -p /var/run/ntp.pid -g 951 1 root S 2984 1% 0% /usr/sbin/lighttpd -f /etc/lighttpd.conf 1342 1 root S 2648 1% 0% {screen} SCREEN -dm -S agent -h 300 agent 1054 1 root S 2620 1% 0% {screen} SCREEN -S bmminer -t bmminer -m -d /usr/bin/bmminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf 935 1 root S 2276 1% 0% /usr/sbin/dropbear -r /config/dropbear_rsa_host_key -p 22 734 1 root S 2152 1% 0% /sbin/syslogd -n -O /var/log/messages 738 1 root S 2152 1% 0% /sbin/klogd -n 1069 1 root S 2152 1% 0% {monitorcg} /bin/sh /sbin/monitorcg 3472 3471 root R 2152 1% 0% top -b -n 1 927 1 root S 2152 1% 0% udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0 3471 951 root S 2152 1% 0% /bin/sh /www/pages/cgi-bin/monitor.cgi 3473 3471 root S 2152 1% 0% /bin/sh /www/pages/cgi-bin/monitor.cgi 3347 1069 root S 2020 1% 0% sleep 20s 1067 1 root S 1912 1% 0% /sbin/getty 115200 ttyPS0 1068 1 root S 1912 1% 0% /sbin/getty 38400 tty1 1 0 root S 1656 1% 0% init [5] 685 1 root S 1640 1% 0% /usr/bin/monitor-ipsig 1059 1 root S 1636 1% 0% /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh 18 2 root SW 0 0% 0% [kworker/u4:1] 7 2 root SW 0 0% 0% [rcu_preempt] 59 2 root SW 0 0% 0% [kworker/0:1] 3 2 root SW 0 0% 0% [ksoftirqd/0] 720 2 root SW 0 0% 0% [ubi_bgt1d] 393 2 root SW 0 0% 0% [kswapd0] 708 2 root SW 0 0% 0% [ubi_bgt0d] 711 2 root SW 0 0% 0% [ubifs_bgt0_0] 723 2 root SW 0 0% 0% [ubifs_bgt1_0] 2 0 root SW 0 0% 0% [kthreadd] 4 2 root SW 0 0% 0% [kworker/0:0] 5 2 root SW< 0 0% 0% [kworker/0:0H] 6 2 root SW 0 0% 0% [kworker/u4:0] 8 2 root SW 0 0% 0% [rcu_sched] 9 2 root SW 0 0% 0% [rcu_bh] 10 2 root SW 0 0% 0% [migration/0] 11 2 root SW 0 0% 0% [cpuhp/0] 12 2 root SW 0 0% 0% [cpuhp/1] 13 2 root SW 0 0% 0% [migration/1] 14 2 root SW 0 0% 0% [ksoftirqd/1] 15 2 root SW 0 0% 0% [kworker/1:0] 16 2 root SW< 0 0% 0% [kworker/1:0H] 17 2 root SW 0 0% 0% [kdevtmpfs] 248 2 root SW 0 0% 0% [oom_reaper] 249 2 root SW< 0 0% 0% [writeback] 251 2 root SW< 0 0% 0% [crypto] 252 2 root SW< 0 0% 0% [bioset] 254 2 root SW< 0 0% 0% [kblockd] 283 2 root SW< 0 0% 0% [edac-poller] 295 2 root SW< 0 0% 0% [watchdogd] 379 2 root SW< 0 0% 0% [rpciod] 394 2 root SW< 0 0% 0% [vmstat] 395 2 root SW< 0 0% 0% [nfsiod] 428 2 root SW< 0 0% 0% [bioset] 429 2 root SW< 0 0% 0% [bioset] 430 2 root SW< 0 0% 0% [bioset] 431 2 root SW< 0 0% 0% [bioset] 432 2 root SW< 0 0% 0% [bioset] 433 2 root SW< 0 0% 0% [bioset] 434 2 root SW< 0 0% 0% [bioset] 435 2 root SW< 0 0% 0% [bioset] 436 2 root SW< 0 0% 0% [bioset] 437 2 root SW< 0 0% 0% [bioset] 438 2 root SW< 0 0% 0% [bioset] 439 2 root SW< 0 0% 0% [bioset] 440 2 root SW< 0 0% 0% [bioset] 441 2 root SW< 0 0% 0% [bioset] 442 2 root SW< 0 0% 0% [bioset] 443 2 root SW< 0 0% 0% [bioset] 477 2 root SW< 0 0% 0% [bioset] 480 2 root SW< 0 0% 0% [bioset] 482 2 root SW< 0 0% 0% [bioset] 485 2 root SW< 0 0% 0% [bioset] 488 2 root SW< 0 0% 0% [bioset] 491 2 root SW< 0 0% 0% [bioset] 494 2 root SW< 0 0% 0% [bioset] 497 2 root SW< 0 0% 0% [bioset] 572 2 root SW< 0 0% 0% [kpsmoused] 597 2 root SW 0 0% 0% [irq/155-mmc0] 613 2 root SW< 0 0% 0% [bioset] 618 2 root SW< 0 0% 0% [bioset] 623 2 root SW< 0 0% 0% [bioset] 628 2 root SW< 0 0% 0% [bioset] 633 2 root SW< 0 0% 0% [bioset] 638 2 root SW< 0 0% 0% [bioset] 650 2 root SW< 0 0% 0% [ipv6_addrconf] 658 2 root SW< 0 0% 0% [deferwq] 662 2 root SW< 0 0% 0% [ext4-rsv-conver]
Thanks.
|
|
|
|