Hows everyone been doing? Been awhile since I got on here.
I wonder if any folks that was around since the beginning is still here?!

I am looking for some Antminer u3s.

Let me know how many you got and how much.
I know PayPal is a taboo word here but check out my history and my "trust". However I don't have that much BTC.

Let me know what you have and pictures. Also please add in prices. If you don't want to say your price out loud on here send me a PM.  
I'm in Texas

I am looking for someone to make some coins for me.

Most places I am looking at want a min of 100 coins at $3.00 per coin.

Single side color would be nice but not needed.

Brass or aluminum. I would like to make a few small quanity of Silver coins like 15 total.

It All in All I would want at least 300 coins of each art work I have.
Please send me a pm if you could do this for me. I am located in Texas.

Breaf details
Case -iStarUSA S-35-3DE1BL
MoBo - SUPERMICRO MBD-X7SPA-HF-O
4GB crucial ram
300w iStarUSA PSU
2 - 4TB wd red
1 - 1TB wd red
1 - 4TB wd RE
1 - 8GB pny thumb drive with unraid basic license (6.0 rc6)

The mobo offers ipmi. That allows you to control the entire machine via a remote computer. (Shutdown/power off- power on)



I just got done building it and decided that I didn't need it after all.
$1050 OR (4.25BTC) with shipping(FedEx Ground).

BitCoin accepted.

Dell poweredge 1900

2 - Intel Xeon quad core 3.0ghz
8 - 2gb ram sticks (16gb total)
1 - 1tb hard drive
3 - 150gb hard drives. (296gb in raid 5)
3 add-on gigabit nic card

No OS on the HDs

http://houston.craigslist.org/sys/4886687720.html


and I have some other stuff as well.
http://www.ebay.com/sch/demonmaestro/m.html?_nkw=&_armrs=1&_ipg=&_from=

if you dont feel like using ebay just contact me on here

I take Bitcoin as well.

Lets do this.

I will post details here in a few hours.  

Details right now.

Flat rate boxes are being used. USA ONLY. 0.2BTCper unit is estimated with shipping included.

I just got these things and they hurt my hears . Great sound quality ! They are Bluetooth.

I like them other than them hurting my ears. Did I mentioned they are BLUETOOTH!  

http://www.bestbuy.com/site/beats-by-dr-dre-beats-studio-wireless-on-ear-headphones-titanium/5197004.p?id=1219113369816&skuId=5197004&st=categoryid$pcmcat143000050011&cp=1&lp=4

What do yaw recommend on a different pair of Bluetooth headphones that are nice and wont hurt my ears.

Okay So I have quite a few blue-ray and DVDs i want to put on my hefty 48TB NAS i just built and I am trying to figure out what would be the best software for converting my movies to put them onto my computer.
So I can watch them over my network.

Note. I do know that the blue-ray movies are quite large in size but my network will handle the data no problem. Yea for fiber/gigabit ethernet.

[*NOTE* Only thing that is left is the 6 small gridseeds! Package Offer for Gridseeds]

*NOTE* Only thing that is left is the 6 small gridseeds! Package Offer for Gridseeds

6 - Gridseeds - been used on script only
1 - Gridseed blade - script only
26 - DualMiners - script only
2  - Rockminer r-box - sha256
9 - antminer u2 - sha256
2 - Raspberry Pi's
1 - 49 port asicminer hub
4 - usb hubs
usb cables included.

I will throw in the psu for the gridseeds and a psu (Not pictured) for the rbox's

Everything is ready to start minding all you got to do is configure the Raspberry Pi's and you will need a PSU for the 49 port hub and that is it.

I am asking $900.00. That is WITH shipping. USA only.
I am located in Texas.

I do have this up on ebay as well. and would prefer to sell all as a package.
http://www.ebay.com/itm/191293957906

This will probably be a shot in the dark but still worth a try.

Here is what is going on. I am wanting to pay off all my school/personal/401k loans with one loan and make a single payment.
I need a total of 42K USD.
I can show proof of amounts needed as well as pay stubs and whatever else you may want.

Some terms I am looking at giving.
42K for 5 years and at 5% interest.  No penalty if paid off sooner.

I am looking for Cash but can pay back in BTC or Cash.

Please only contact me if serious.

I really want to sell this as a packaged deal.

4 antminer s1
1 corsair 850w psu
1 evga 850w psu
2 bfl jallys
1 raspberry Pi

I am in Texas
BTC2.55 or $1000 cash with FedEx Ground shipping in the USA (That is usually 3 day shipping)

Just got done putting a brand new msd distributor in it. New Mechanical Fuel pump with new lines and filters. Very Nice truck.

Asking $6000 (Will take Bitcoin as well)

I am in North Houston, Texas

*The truck and boat in this picture are both for sale. Take as a package deal for $15K*

For the most part its brand new. Used it for maybe 10 hours and decided to go a different route.

$20.00 with shipping.
This is what it is.
http://www.amazon.com/gp/product/B00HL7Z46K

Note: This is in hand. Shipping from Texas. I will ship out of the USA BUT you will have to pay for shipping.

Dell Optiplex 360
Windows 7 Pro 32bit
Intel Pentium D 2.5GHz
4GB ram
75GB Hard drive

$100.00 plus shipping.

Note: Shipping will be via FedEx Ground unless you want air.

Hey quick question. I have an AntMiner S1 and its not letting me access it via the address on the sticker. I just got it from a friend that was having some issues with it and trying to help them out. I have reviewed over the troubleshooting techniques and nothing has worked. I have pressed the little black button for 3 seconds, nothing. i tried it for 5 and still nothing. i tried the paper clip and still didn't work.

I have uploaded a small video of what lights are flashing.
https://www.youtube.com/watch?v=kzPJt_gczQc

Thank you for the help.

Shipping from Texas USA

Asking BTC0.75

BFL Single and BFL Little single
package deal with Corsair 1050w PSU

holds steady 90+gh/s
shipping included if in USA.

or will trade for gridseeds.

Side note: For thoes that will say you are asking too much Lets brake this down.

Corsair 1050w psu. $200 BTC0.5 used
BFL Single 60gh $175 BTC0.3 used
BFL Little single 30gh $100 BTC0.25 used
that it self is $475 or BTC1.05 average.

so in reality its about the right price for current prices.

I have 1 49 port hub and an asicminer cube.


BTC0.2 for the hub
BTC0.3 for the cube

With flat rate shipping in the USA.
I am located in Texas

I want to know how and alot of people want to know how.
a nice and easy guide.

I will just stick this here for quick reference for people to get there gridseed miners up and going quick.

Ok, so first things first, disclaimer, I'm not a Linux guy, so please forgive me if I'm making a dumb mistake here.  I've also never used bgfminer so I've got that working against me as well.  

Thanks to everyone who helped me figure this out...here's a revised version of how to compile bfgminer for a RasPi...

------------------------------------------------
Steps I took to build BFGMiner from source:
------------------------------------------------

//update my RasPi first

Code:

sudo apt-get update

//saw this on the linux build instructions, so I presume I need these as pre-requisites to compiling bfgminer

Code:

sudo apt-get install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev

sudo apt-get install libjansson-dev uthash-dev libncurses5-dev libudev-dev libusb-1.0-0-dev libevent-dev

//cloned nwoolls version of bfgminer which has beta support for the miners in question

Code:

git clone -b feature/gridseed-support https://github.com/nwoolls/bfgminer

//build it

Code:

cd bfgminer

./autogen.sh

./configure CFLAGS="-O3" --enable-scrypt --enable-gridseed

make

sudo make install

sudo ldconfig

sudo nano bfgminer.conf

//make the bfgminer.conf file.

Code:

{
"pools" : [
        {
                "name" : "MyPool1",
                "url" : "stratum+tcp://mypool.url.com:3333",
                "user" : "myworker",
                "pass" : "x",
                "pool-priority" : "0"
        }
],
"api-allow" : "W:127.0.0.1,192.168.1/24",
"api-listen" : true
}

//trying to run it

Code:

sudo ./bfgminer -S gridseed:all --set-device gridseed:clock=850 --failover-only --scrypt -c bfgminer.conf

Aparently The Goat has been traveling 




Just messing with you man. Hope to get to meet you next go around. You sound like an awesome person.