Show Posts
|
Pages: [1]
|
2
|
Bitcoin / Mining support / s9i no chips
|
on: August 31, 2018, 02:07:48 AM
|
Anyone ever have this issue and resolved it? I have reset to default and flashed the latest firmware Miner Type Antminer S9i Hostname antMiner Model GNU/Linux Hardware Version 22.0.1.3 Kernel Version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 File System Version Tue May 22 20:08:17 CST 2018 Logic Version S9i_VTest BMminer Version 2.0.0 Uptime 12 Load Average 0.53, 0.23, 0.10
main.c:13690: log_level = 4 main.c:13717: This is XILINX board. Totalram: 507527168 main.c:13729: Detect 512MB control board of XILINX driver-bitmain.c:1003: forceFreq=-1 forceFlag=0 main.c:8280: DETECT HW version=0000c516 main.c:13756: miner ID : 8018f5ca4e104814 main.c:13781: Miner Type = S9 main.c:13793: AsicType = 1387 main.c:13796: real AsicNum = 63 main.c:13889: use critical mode to search freq... driver-bitmain.c:2401: get PLUG ON=0x000000e0 driver-bitmain.c:2471: Find hashboard on Chain[5] driver-bitmain.c:2471: Find hashboard on Chain[6] driver-bitmain.c:2471: Find hashboard on Chain[7] driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff main.c:2049: Check chain[5] PIC fw version=0x03 main.c:2049: Check chain[6] PIC fw version=0x03 main.c:2049: Check chain[7] PIC fw version=0x03 main.c:8664: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[5] has freq in PIC and will jump over... main.c:8809: Chain[5] has core num in PIC main.c:8819: Chain[5] ASIC[17] has core num=4 main.c:2049: Check chain[5] PIC fw version=0x03 main.c:8664: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[6] has freq in PIC and will jump over... main.c:8809: Chain[6] has core num in PIC main.c:2049: Check chain[6] PIC fw version=0x03 main.c:8664: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[7] has freq in PIC and will jump over... main.c:8809: Chain[7] has core num in PIC main.c:2049: Check chain[7] PIC fw version=0x03 main.c:8883: get PIC voltage=6 on chain[5], value=940 main.c:8883: get PIC voltage=6 on chain[6], value=940 main.c:8883: get PIC voltage=6 on chain[7], value=940 driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:9046: chain[5] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[5] temp chip I2C addr=0x98 main.c:9069: chain[5] has no middle temp, use special fix mode. main.c:9046: chain[6] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[6] temp chip I2C addr=0x98 main.c:9069: chain[6] has no middle temp, use special fix mode. main.c:9046: chain[7] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[7] temp chip I2C addr=0x98 main.c:9069: chain[7] has no middle temp, use special fix mode. driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:9297: CRC error counter=0 main.c:9312: set command mode to VIL main.c:9384: --- check asic number main.c:9481: After Get ASIC NUM CRC error counter=0 main.c:9504: set_baud=0 main.c:10423: The min freq=700 main.c:10425: set real timeout 52, need sleep=379392 main.c:12545: After TEST CRC error counter=0 driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:13954: search freq for 1 times, completed chain = 3, total chain num = 3 board_frq_tuning.c:583: single_board_frq_tuning enter board_frq_tuning.c:584: min_rate, des_rate, fix_volt:13800, 14000, 880 board_frq_tuning.c:127: force_freq not set, don't need tuning driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:14332: restart Miner chance num=5 main.c:14372: waiting for receive_func to exit! main.c:14386: waiting for pic heart to exit! main.c:13645: bmminer not found= 1378 root 0:00 grep bmminer
main.c:14430: bmminer not found, restart bmminer ... This is user mode for mining Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Tue May 22 20:08:17 CST 2018 type: Antminer S9i set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 8018f5ca4e104814 set_reset_allhashboard = 0x0000ffff Checking fans!get fan[2] speed=5760 get fan[2] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J6] has backup chain_voltage=870 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J7] has backup chain_voltage=910 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J8] has backup chain_voltage=910 Check chain[7] PIC fw version=0x03 Chain[J6] orignal chain_voltage_pic=6 value=940 Chain[J6] will use backup chain_voltage_pic=870 [125] Chain[J6] get working chain_voltage_pic=125 Chain[J7] orignal chain_voltage_pic=6 value=940 Chain[J7] will use backup chain_voltage_pic=910 [57] Chain[J7] get working chain_voltage_pic=57 Chain[J8] orignal chain_voltage_pic=6 value=940 Chain[J8] will use backup chain_voltage_pic=910 [57] Chain[J8] get working chain_voltage_pic=57 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ... max freq = 100 set baud=1 driver-btm-c5.c:15225:bitmain_c5_init: start thread for read temp setStartTimePoint total_tv_start_sys=187 total_tv_end_sys=188 driver-btm-c5.c:10403:read_temp_func: last_testpatten_highest_pcb_temp = -100 restartNum = 5 , auto-reinit enabled... do read_temp_func once... Done check_asic_reg Max pcb temp : -100 set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0 FAN PWM: 6 read_temp_func Done! CRC error counter=0
|
|
|
5
|
Alternate cryptocurrencies / Announcements (Altcoins) / [ANN] Unofficial [KASH]KashCoin currency for the music industry[DJ Lethal]
|
on: January 24, 2017, 03:55:43 PM
|
I found this on the web it looks interesting, not my project, could not find this in the forums. Why Kashcoin? Highly Innovative and Simple. Kashcoin will be accepted at many places across the globe – from music festivals to retail stores. Giving discounts and perks back to the Kashcoin community. DJ Lethal and Justin Lally have launched an altcoin for the music industry called Kashcoin. Users will be eligible for deals and perks. The goal is to introduce music lovers to cryptocurrency. Video! https://youtu.be/OTPlvTpC0GYWebsite: https://kashcoin.net/Steemit: https://steemit.com/bitcoin/@steveo/kashcoin-promises-to-be-the-crypto-currency-for-the-music-industryTwitter: https://twitter.com/kashcoinTrade: https://www.cryptopia.co.nz/Exchange/?market=KASH_BTCspecifications for the coin: – Algo x11 – Premining – Proofs: Network-Stake (PoS) – Anonymous Burn Destroy (PoBA) – Min Stake Time of 1 hour, Max Stake Time of 8 hours – PoW ended at Block 100.000, Mined 1,200,000 KASH – Minimum Transaction Fee: 0.01 KORE – RPC Port: 28555, P2Port: 28556 – Confirmations: 10, Maturity: 30
|
|
|
6
|
Alternate cryptocurrencies / Pools (Altcoins) / Z-POOL Support Thread(Unofficial)
|
on: December 18, 2016, 06:55:47 PM
|
I am creating this thread since the owner of the pool has decided to close the official thread, I have seen many issues with the pool and have requested support by opening a ticked at his support site just to have it closed with no real support. I know the community for this pool are more helpfull concerning issues and this is a good place to handle this. Before posting here you can can read the closed thread to resolve many issues at the link below, a thread like this can only make a pool like this better. Original Pool Thread: https://bitcointalk.org/index.php?topic=1260863.0
|
|
|
|