 Show Posts
|
|
Pages: [1] 2 »
|
|
I have a few S9's running with 2 pools, antpool and zpool. 2 miners show Antpool as alive, and are mining fine, 6 others show antpool as dead and will only mine on zpool. Anyone run into this issue? Double checked my pool info. Not sure if it's an awesome miner issue or if its in the antminers.
|
|
|
|
|
Seem to be getting a socket connection failed: Connection refused on one of my miners.
Also I have a D3 that gets HW errors no matter how low I go with the clock speed. I tried increasing voltage as well with no luck.
|
|
|
|
|
On profit switching for external miners (antminers), what is the recommended switching interval(minutes)?
Granatgas shows $0 value for current profit(pool is alive but website is dead the last couple days), will the profit switcher still switch over if true value is higher than other pools?
|
|
|
|
|
Anyone elses October 21-31 batch being held in customs longer than normal?
|
|
|
|
This is interesting!
9.4 amps at 208V for 2 D3's = 977.6watts each.
Someone can chime in but after reading I think I take the individual line voltage(120v) x ~9.4amps = 1128watts |
|
|
|
We got 6 units in today. All working great, no bad units so far. Hashing around 17-17.2gh/s average. Haven't checking amp draw yet.
Nice are they louder that S7/S9? Seem to be the same fans, running around 4800 rpm so they aren't real quiet. Our airflow is not ideal right now. I'm sure with proper exhaust/intake the fan speed would come down some. |
|
|
|
This is interesting!
9.4 amps at 208V for 2 D3's = 977.6watts each.
Those are VA, so W is even better. Might just get a few more while stocks last  Actually not sure I am calculating correctly. Measuring 9.4amps on each leg of a 2 pole breaker. Each leg measures 120v, if I check them together its 208v. |
|
|
|
|
This is interesting!
9.4 amps at 208V for 2 D3's = 977.6watts each.
|
|
|
|
|
September 15th in China, anyone gotten a shipping notice yet?
|
|
|
|
More toasters in stock
<input type="hidden" class="remainCount" value="8106">
Interesting I can't seem to see the amount in stock any more, just min and max quantities. |
|
|
|
|
Innosilicon A4+ claims 500mh/s on 750watts with 14nm chip...would the L3+ be around the same size based on hashrate and power draw?
|
|
|
|
|
Our orders are now marked as paid through Bitmain.
We have a couple units left to sell. Price is $11000. PM if interested.
|
|
|
|
  Power supplies are in a separate order. |
|
|
|
|
I have some Antminer D3's for sale. PM if interested. 1st batch, Shipping Sept 18th-25th from Bitmain. Can provide Bitmain confirmations and our bank transfer confirmations.
|
|
|
|
|
Hello!
We were quick enough to order a number of Bitmain D3's.
These will be shipped from Northeast USA immediately after arrival.
Will ship SAME DAY as arrival, with NEXT DAY UPS delivery to lower 48 USA included in the price. We can do early AM delivery for another .05btc.
International shipping is also available, UPS international. We will also ship same day as arrival.
Bitmain Power Supply (APW3++) is included with each D3 ordered.
BTC, LTC, and ETH are accepted. Price is 3BTC each, includes next day shipping to lower 48 and Bitmain PSU.
PM if you are interested.
|
|
|
|
Hey guys, a couple problems I haven't been able to solve. Not sure if it's a claymore issue or something else.
6 rx 570's with bios' modded. GPU0 overclocks as expected with Afterburner, 25MH/s with no OC... 27MH/s with a little overclocking and undervolting. All other GPU's are not affected by the overclocking but will undervolt. Yes the synchronize similar GPU's is on. I tried it with it off and overclocked each GPU on its own, same result...only GPU0 has a change in hash rates.
Same issue with my gaming pc with 2 rx480's...GPU0 hash rate changes but GPU1 is unchanged...GPU-Z confirms the memory clock is rising.
I had some weird issues on a rx 480 rigs thats seems a bit similar. In the end it was reinstalling afterburner that fixed it .. never made any sense. (Lucky you getting a hold of rx 5xx at all... im still waiting another week for my batch) Thanks I'll try it. Yes I'd like to find some more! Disabled GPU 1-5 on Claymore using number keys, then enabled and the hash rate matched GPU0! The 480's have still have the issue but those cards are not on risers...maybe thats why.. |
|
|
|
Hey guys, a couple problems I haven't been able to solve. Not sure if it's a claymore issue or something else.
6 rx 570's with bios' modded. GPU0 overclocks as expected with Afterburner, 25MH/s with no OC... 27MH/s with a little overclocking and undervolting. All other GPU's are not affected by the overclocking but will undervolt. Yes the synchronize similar GPU's is on. I tried it with it off and overclocked each GPU on its own, same result...only GPU0 has a change in hash rates.
Same issue with my gaming pc with 2 rx480's...GPU0 hash rate changes but GPU1 is unchanged...GPU-Z confirms the memory clock is rising.
I had some weird issues on a rx 480 rigs thats seems a bit similar. In the end it was reinstalling afterburner that fixed it .. never made any sense. (Lucky you getting a hold of rx 5xx at all... im still waiting another week for my batch) Thanks I'll try it. Yes I'd like to find some more! |
|
|
|
|
Hey guys, a couple problems I haven't been able to solve. Not sure if it's a claymore issue or something else.
6 rx 570's with bios' modded. GPU0 overclocks as expected with Afterburner, 25MH/s with no OC... 27MH/s with a little overclocking and undervolting. All other GPU's are not affected by the overclocking but will undervolt. Yes the synchronize similar GPU's is on. I tried it with it off and overclocked each GPU on its own, same result...only GPU0 has a change in hash rates.
Same issue with my gaming pc with 2 rx480's...GPU0 hash rate changes but GPU1 is unchanged...GPU-Z confirms the memory clock is rising.
|
|
|
|
|
