 Show Posts
|
|
Pages: [1] 2 »
|
|
@sp_ Please release linux versions. Nobody mine under Windows in 2021.
|
|
|
|
should be 54.9mhs 1100/1026@787mv @ 112watts ...
Can you please explain how do you go below 800 mV?  with linux and atitool Which miner, what memtweak settings? I have 6xVega 56 sapphire REF. 56 bios, and max. is 50mhs. No run above 1070cc and /1027mc/mem 820v. My Vega56 is on : 1090 core 1020 mem 0.812 v Gets me 53.19mhs on mmpos non modded bios. it seems that mmpos uses amdmemtweak timings by default )) yes all that built right in Where you set the smart tune(low,mid,high)? Miner is Teamredminer? |
|
|
|
should be 54.9mhs 1100/1026@787mv @ 112watts ...
Can you please explain how do you go below 800 mV? with linux and atitool Which miner, what memtweak settings? I have 6xVega 56 sapphire REF. 56 bios, and max. is 50mhs. No run above 1070cc and /1027mc/mem 820v. |
|
|
|
Vega64 flashed with Vega56 bios
using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239
Core 1097Mhz / 825mV
Mem 1028Mhz
you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!
I have Vega 56 with 64 BIOS, 6xSapphire REF cards with samsung RAM. If I put Mem over 960 teamred is freeze and restart. SocMhz jump from 960 to 1107, but I can't set in HiveOs. I think SocMhz will be max 1028. Core 970, 840mv Mem 960, 800mv I get 45Mhs ~100W using these timings: --CL 20 --RAS 20 --RCDRD 11 --RCDWR 12 --RC 43 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --RE F 65535 --RFC 248 If I put RC value under 42, ETH MHS growing up, but imediatly crashed. Any better timings to these REF cards?! Vega 56 is the bios to run. 64 only uses more power but doesnt provide additional hashing. Most will flash their 64s down to 56. I tryed, and 45MHS without any memtweak, but if I set some memtweak modifications (all my working 64bios sets) then teamread is immediatly crash/reboot.  |
|
|
|
Vega64 flashed with Vega56 bios
using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239
Core 1097Mhz / 825mV
Mem 1028Mhz
you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!
I have Vega 56 with 64 BIOS, 6xSapphire REF cards with samsung RAM. If I put Mem over 960 teamred is freeze and restart. SocMhz jump from 960 to 1107, but I can't set in HiveOs. I think SocMhz will be max 1028. Core 970, 840mv Mem 960, 800mv I get 45Mhs ~100W using these timings: --CL 20 --RAS 20 --RCDRD 11 --RCDWR 12 --RC 43 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --RE F 65535 --RFC 248 If I put RC value under 42, ETH MHS growing up, but imediatly crashed. Any better timings to these REF cards?! |
|
|
|
Thanks @Eliovp for this tool. I have a problem:   Tweak shows crazy GPU values, but this is GPU0 in miner (not GPU 5 like a screenshot) and low hashrate. I think tweak not applied the values. My rig: Win10, 18.6.1 driver, 6xVega56@64 Sqmsung RAM. |
|
|
|
|
Hi Guys,
Zorg33 said to me share this set, because it's impossible, but working good for me:
--CL 12 --RAS 28 --RCDRD 12 --RCDWR 5 --RC 44 --RP 10 --RRDS 3 --RRDL 3 --RTP 5 --FAW 20 --CWL 7 --WTRS 4 --WTRL 9 --WR 16 --WRRD 1 --RDWR 19 --REF 17550 --MRD 8 --MOD 15 --PD 8 --CKSRE 10 --CKSRX 10 --RFC 250
Vega56 @ 64 sapphire samsung ram, Win10, 18.6.1 and 18.5.1 classic 1408/900core 1100/900mem
Turtle 22+
ETH 51+
Cr-Lite 10K khs (1600/990 1100/900, but crashed, 9600kh 1408/900 1100/900 super stable after 24h)
|
|
|
|
Monero nethash before the fork 1200 MHASH, nethash after the fork( block 693) 176 MHASH . the nethash will continue to decline until we reach 720 blocks.
At 176 MHASH we got around 352 000 gpu's mining (@500h/s). This should take some load of ethereum and zcash and boost the profit all over the board.
@sp-: When release new cryptonight-spmod with modified CryptonightV7 algo? If I know right circa 3 lines must be rewritten. |
|
|
|
And what about the promised PHI update for the donators? You told like 2 weeks ago it's getting ready soon.
Yep, I'm looking forward to it too, but sp does not respond here/private message. I think this is not correct. |
|
|
|
SP, where is promised LUX mod?
+1? Not answer received to my private Message. |
|
|
|
|
How to set if "Stratum authentication failed" or other pool connection error, awesome miner jump to other pool? I maked pool group, but not jumped to next pool.
|
|
|
|
Working on lux #2 with a fee. 44 MHASH.
Free update to the donators.
When do you want to release? |
|
|
|
|
Where can I found blake2s calcultor like whattomine?
|
|
|
|
|
How can I set to cast-xmd multiple pools? If my pool under DDOS attack, need to jump to other pool.
|
|
|
|
Does Epsylon's ccminer 2.2.2 fully validate hashrate on the pool? I've tested it 3 weeks ago but pool shows 16mh instead 21mh in average ( 6 hours of testing )
No. CCminer 2.2.2 report wrong hash poolside. (stale share bug) 1070ti:
ccminer 2.2.2: 2.1 MHASH
ccminer sp-mod 2.42MHASH
With same clock setting ? Yes. Same clocks. So with some crazy oc I guess my mod can do 2500 ++ hm, interesting results you do have here and what is the price you are asking? would it be standard 0.05 or there might be discounts? )) and really interesting what is the performance for gtx 1080ti. +1, i'm also intrested For equihash mining is there a improved version? Thank you +1 me too. |
|
|
|
The lyra2z is in development. An optimized kernel take alot of time to make because the opensource is good.
which opensource, ccminer 2.2.2? |
|
|
|
DDR5x and DDR5
DDR5x is slower in random access, but if you read linear memory there shouldn't be much difference. I think my mod will work good on the 1080ti. I have a 1080ti, how or where can I buy the lyra2z mod or test it out if it actually has an improvement on this card? Does it run on linux? Thank you I would also like to know. |
|
|
|
+1 No pay. My address: XRPW4apt1m7srGkHFZ1u1rYP5fRXvuWgyC |
|
|
|
First milestone is reached: the first flashable firmware image is a fact.  Please give a reply in this thread if you're willing to test it. It's really experimental so here are the terms:- I am not responsible for any damage to your miner, flash at your own risk - You're not in panic when you see HW errors because of the low voltage  - You do have a watt meter - You're willing to test and give me feedback for improvement. - You're not going to complain about the 1.5% mining fee. what you will get:- no more high speed fan's during startup - no more low fan warnings (the fan speed is fully unlocked) - a first version of the unlocked voltage. If you do join this beta test, please test the following:set the speed to 400Mhz on your bitmain firmware and measure the amount of watts needed. flash the beta firmware and set fan speed to manual at 20% set the speed to 400Mhz and try to get as low as you can on the voltage settings before you see hardware errors. PM me then the following information:- your batch - the wattage at 400mhz on the bitmain firmware - The voltage on the custom firmware so that you run at the same wattage as the bitmain firmware - The lowest possible voltage setting for 400mhz on the custom firmware. (before getting HW errors) - the wattage measured at the new voltage - your fan RPM speed at 20% fan setting ofcourse if you run in any other problems please PM me as well. I'm ready to test, I have a voltmeter. |
|
|
|
And it's possible to mine only one of 11 algos? For example mining only with skein algo
It would be good. I founded voltage set, and fixed here: (725mv) .frequency = opt_bitmain_DASH_freq,
.voltage = {0x07,0x25}, cgminer must be recompile with this change: .frequency = opt_bitmain_DASH_freq,
.voltage = opt_bitmain_DASH_voltage, |
|
|
|
|
