 Show Posts
|
|
Pages: [1]
|
|
Hi I'm collecting 1000KZC and operating the masternode.
Like everyone else, MN status was initially ENABLED and now WATCHDOG_EXPIRED.
However, MN revenue comes in at 2.25 KZC every time. It looks like working well.
Should I install SENTINEL following the complex steps of the official guide? (I'm afraid to try)
If I just leave it in WATCHDOG_EXPIRED state, There's something wrong with my MN?
Thank you for your friend who explained it to me.
P.S In addition, I want to know how much KZC I have to earn per day if it should be normal to set up a master node.
How do I calculate it? What is KZC's block time? It is not mentioned anywhere.
|
|
|
|
Is there any solution to this question? I thought I was in the same situation.
I am wondering how to set up the solaris.conf file in Qt Wallet when running more than one master node
For example..
Masternode 1 IP : 222.222.222.91:60020
Masternode 2 IP : 222.222.222.92:60020
then, In solaris.conf file,
I should add two lines like below?
masternodeaddr=222.222.222.91:60020
masternodeaddr=222.222.222.92:60020
This is my examples of config files that work with 2 masternodes on 1 wallet. Pay attention that local wallet's solaris.conf should not contain any masternode-related settings. I tried to help Aureliusy in PM, but he said that he still had some issues. Anyway, this works for me, just replace stuff like MASTERNODE1_PRIVATE_KEY and mn1.ip.add.ress:60020 with your real data. This is my local solaris.conf rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=1
server=1
listen=1
port=60020
Local masternode.conf masternode1 mn1.ip.add.ress:60020 MASTERNODE1_PRIVATE_KEY TX_ID TX_INDEX
masternode2 mn2.ip.add.ress:60020 MASTERNODE2_PRIVATE_KEY TX_ID TX_INDEX
masternode1 solaris.conf rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=0
server=1
daemon=1
listen=1
port=60020
masternode=1
masternodeaddr=mn1.ip.add.ress:60020
externalip=mn1.ip.add.ress:60020
masternodeprivkey=MASTERNODE1_PRIVATE_KEY
masternode1 masternode.conf masternode1 mn1.ip.add.ress:60020 MASTERNODE1_PRIVATE_KEY TX_ID TX_INDEX
masternode2 solaris.conf rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=0
server=1
daemon=1
listen=1
port=60020
masternode=1
masternodeaddr=mn2.ip.add.ress:60020
externalip=mn2.ip.add.ress:60020
masternodeprivkey=MASTERNODE2_PRIVATE_KEY
masternode2 masternode.conf masternode2 mn2.ip.add.ress:60020 MASTERNODE2_PRIVATE_KEY TX_ID TX_INDEX
Thanks, I modified my local solaris.conf file (in QT Wallet) Just removed that 4 lines ''' masternode=1 masternodeaddr=mn1.ip.add.ress:60020 externalip=mn1.ip.add.ress:60020 masternodeprivkey=MASTERNODE1_PRIVATE_KEY ''' After 10 hours with the state marked ENABLED, it finally came in 0.4 XLR from the second master node. It WORKED! Thank you very much But I have one more question, In official Masternode setting guide, if I enter "masternode status" in the console window, then masternode status is displayed. but in my case, I enter "masternode status" then "This is not a masternode (code -1)" is displayed. For now, both masternodes are working, but I do not know why. Do you know why? |
|
|
|
I thought I was running 2 nodes on 1 wallet . But I have been receiving zero coins Today. Although System said Masternode was succesfully running. (I have been running one node without problems until I added the 2nd node)
What would be the conf files of the LOCAL SOLARIS conf file when you have 2 Masternodes?
This is for one
rpcallowip=127.0.0.1
rpcuser=solarisrpc
rpcpassword=PASSSSSSSSWORD
staking=1
server=1
listen=1
port=60020
masternode=1
masternodeaddr=ip.ip.ip.ip:60020
externalip=ip.ip.ip.ip:60020
masternodeprivkey=KEYYYY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101
Is there any solution to this question? I thought I was in the same situation. I am wondering how to set up the solaris.conf file in Qt Wallet when running more than one master node For example.. Masternode 1 IP : 222.222.222.91:60020 Masternode 2 IP : 222.222.222.92:60020 then, In solaris.conf file, I should add two lines like below? masternodeaddr=222.222.222.91:60020 masternodeaddr=222.222.222.92:60020 |
|
|
|
Hello.. I have a question about making Masternode Address
I run qt wallet in my computer, and in QT wallet, I have 3 wallet addresses (A,B,C)
A address is mining address, B address is Masternode and C address is the address that I want to use as another master node.
then...
Now, I have collected 1000XLR at address A, So I want to send it to address C,
How do I set it up so that I can withdraw from A wallet without being withdrawn from B wallet?
Since B wallet is performing master node, I worry that the master node will be suspended when I withdraw automatically
I want you to help me with this.. Thanks
on your wallet just go to SETTING , OPTIONS ,WALLET ,Enable coin control features ,just check that box , and hit OK , and on your wallet hit SEND ,INPUTS and you will see address B yor Masternode , right click and lock that and you ok to send 1000 coin from A to C good luck  Why did not I know such a simple thing ?! Thank you very much, my friend. |
|
|
|
|
Hello.. I have a question about making Masternode Address
I run qt wallet in my computer, and in QT wallet, I have 3 wallet addresses (A,B,C)
A address is mining address, B address is Masternode and C address is the address that I want to use as another master node.
then...
Now, I have collected 1000XLR at address A, So I want to send it to address C,
How do I set it up so that I can withdraw from A wallet without being withdrawn from B wallet?
Since B wallet is performing master node, I worry that the master node will be suspended when I withdraw automatically
I want you to help me with this.. Thanks
|
|
|
|
|
Hi I have a question about masternode system.
Become a Masternode more than one (two.. three... or more) , I should have as many VPSs?
(IF I want to make 3 MN, then I should have 3 VPSs?)
The concept of a master node is unfamiliar to me because it is the first time..
Perhaps I think that we need one IP address per master node... Is that correct?
If so, does it cost about $ 5 per month per master node?
|
|
|
|
What the... IDCRAY POOL has been burst... Stratum server was paralyzed. So Mining can not proceed anymore. Where is my coin?  Idcray shows that pool hash NaN... What the ...  |
|
|
|
What is happening? Pool is not able to find the block...  |
|
|
|
I see that cwigm reported my total has is 118.5MH/s while on the pool it says I'm doing 50-100MH/s, is this normal?
in the beginning - yes ... it does settle in to a more reasonably accurate figure the longer you mine and more shares are submitted ... but the pool rates are never completely accurate as they estimate the miner hash by the submitted shares in a given amount of time ( with mpos that usually 5mins ) - whereas the miner is quite accurate because its the one producing the hashrate ... the pool will always fluctuate somewhat - but should remain within a reasonable level of accuracy ... at time it will jump wildly - as many other factors affect the share rate submitted ... but over all - its ok ... #crysx can complite for linux ( ubuntu) ? i have 12 card 1060 nvidia with main asrock h110 BTC pro I had ubuntu 16.04 miner which has gtx 1050ti 12way (tb250-btc+) but, Now CWIGM windows version is provided only I'm looking forward to the next version. |
|
|
|
Thank you for your favor I tested it on my computer (just common desktop, 1060 3G 1rig) Normally, In palginmod(Skunkhash mining), 1060 3G's hashrate 15.5MH/S~ but CWIGM 0.9.8's hashrate is better, which is more than 18MH/S  it is really good... I'm so excited I'm gonna doing more test about this miner. Say thanks to chrysophylax again. Regards. |
|
|
|
|
I want to know How to mine SpreadCoin...
Spreadcoin Mining does not have mining pool?? I can not find it.
I downloaded SpreadCoin qt in official site(spreadcoin.info) and synchronized blockchain network with my computer.
but I have very small hash.. so if I do solo mining, I can not get a reward(SPR coin)
So I wanna mining in the pool. Please tell me where to go
|
|
|
|
|
