Latest posts of: Specialist1

Show Posts
Pages: « 1 [2] 3 4 »

Alternate cryptocurrencies / Mining (Altcoins) / 500 YouTube Subscriber - ETN, GRFT, or XTL Giveaway

on: June 03, 2018, 08:15:38 PM

500 YouTube Subscriber - ETN, GRFT, or XTL Giveaway https://www.youtube.com/watch?v=F6RpsZHHQYE&t Goodluck!

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 03, 2018, 08:14:40 PM

No Problem! Quote from: fung on June 02, 2018, 07:23:57 AM Quote from: Specialist1 on June 02, 2018, 03:52:09 AM Here is a good website to check out the hashpower on the network: http://miningpoolstats.stream/electroneum Quote from: butka on June 01, 2018, 06:26:58 PM Do you know what percentage of the network has moved to the new mining software? I imagine the hashrate must be low currently, so it has to be beneficial for people who mine cryptonight to move to your coin. Can you share some insight as to how the fork was done. Specifically, to what extent was the algo changed, and is it now fully ASIC resistant. Thank you for your infomation.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 03, 2018, 04:33:41 AM

If you are a Crytonight miner and are looking for other coins to mine, check out this website. https://www.cryptunit.com/ Quote from: allnewbie on June 02, 2018, 07:37:33 AM there are very limited coin can be mined by cryptnight miner now, limited profit after most of coins forked...

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 02, 2018, 03:56:25 AM

This is a difficult one. There are a few problems right now. Empty blocks, low hashpower for the difficulty, time between blocks is very high. You normally do not get paid until a block is mined. Since the pool has not found a block, you are not going to see a payment. The hope is that the pool finds the block and the Bonus system that is currently in place will pay out and you will be compensated for your mining effort. Quote from: coins4commies on June 02, 2018, 03:50:59 AM I've been on it sice the start and still have 0 due from hashvault pool despite over 6000 accepted shares. any help would be appreciated.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 02, 2018, 03:52:09 AM

Here is a good website to check out the hashpower on the network: http://miningpoolstats.stream/electroneum Quote from: butka on June 01, 2018, 06:26:58 PM Do you know what percentage of the network has moved to the new mining software? I imagine the hashrate must be low currently, so it has to be beneficial for people who mine cryptonight to move to your coin. Can you share some insight as to how the fork was done. Specifically, to what extent was the algo changed, and is it now fully ASIC resistant.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 02, 2018, 03:50:28 AM

They did an update on the mobile miner a little while back. Hashrate is stable and the payouts are (semi) consistent. over the past month and a half of mobile mining I have collected about 460 ETN. Quote from: bitmover on June 02, 2018, 12:52:22 AM Electroneum was the first ICO i participated. I sold all in the first day possible, with 7x gains. It was very good for me... I am sad to see the coin price so low now, and people such as McAfee chilling it on twitter. I really like the project, as a Monero fork and nice marketing. I hope electroneum recover from this terrible crash (90% down from ATH). About the mobile miner, I didn't like it very much. It was easy to use, but the reward was sooo low, impossible to use for me. Like 1 cent per week lol

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum - After the fork

on: June 02, 2018, 03:47:40 AM

Thank you very much. Quote from: RyoCurrency on June 01, 2018, 04:28:05 PM You have themed-like wallpaper on your desktop there Nice educational video

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

on: June 01, 2018, 03:33:03 AM

Be sure to add --algo=1 to your .bat file https://www.youtube.com/watch?v=Dgn4nqq8XmM&t=24s Quote from: SpceGhst on May 30, 2018, 01:14:08 PM Quote from: CharlieCox on May 30, 2018, 01:05:33 PM Quote from: Permonik on May 30, 2018, 09:23:29 AM Hi, anyone try to mine ETN after the fork? I have tried and it doesn't work. The found shares are rejected by the pool. Did you change algo to CNv7? Has your pool updated to new algo?

Alternate cryptocurrencies / Mining (Altcoins) / Electroneum - After the fork

on: May 31, 2018, 03:07:36 AM

If you guys have any questions, hopefully, this can answer them. How-to mine with the new XMR Stak released about 6 hours ago. https://www.youtube.com/watch?v=8QKKEUsYgUw

Alternate cryptocurrencies / Mining (Altcoins) / Fix - Windows Update Version 1803 = Broken Miner

on: May 27, 2018, 11:47:55 PM

Windows Update Version 1803 = Broken Miner Depending on the mining program you are using, Windows Update - Ver. 1803 can break your mining rig. Disable the update before this happens. After the update, my only choice was to re-image windows. https://www.youtube.com/watch?v=Uy-Az9Hmn_E

Alternate cryptocurrencies / Mining (Altcoins) / Re: Cryptonight V7 mining issues

on: May 20, 2018, 09:36:53 PM

Here is a guide for XMR STAK, if you are interested in Cast XMR, I have a couple for that miner also. https://www.youtube.com/watch?v=XqpsC3PKq3U Quote from: Ferdous Hossain on April 25, 2018, 09:09:18 AM I'm having a bit of problem here. As you all know, Cryptonight V7 is more profitable than v6 after the monero hardfork, I started trying to mine with this algo in Nicehash.But I got an error. The Nicehash Legacy was showing 0 H/s in total (GPU+CPU) & XMR showed 0 H/s in only gpu but mining with CPU. so I reinstalled Nicehash Legacy. But this time the GPU can not be benchmarked. Though it had abnormal spikes in GPU usage. Then I used SRBminer-CN. It also had 0 H/s after a few minutes & the same identical spike i had when benching XMR stak in Nicehash. Then I switched to XMR stak (non NH). But no luck. It mines, gets new jobs from pool but result accepted by pool is one or two .( I'm confused in this. Does it still mining or not. Because I don't get a penny if the result is not accepted by the pool.) At last I tried Claymore CryptoNote AMD GPU Miner v11.3. This one mines pretty good but the total share is 0.enter image description hereSo I'm not so sure about this one that is this still mining or not..Hopes somebody can help me out. Thank you all.

Alternate cryptocurrencies / Mining (Altcoins) / New to mining? - CryptoNight / AMD - How to mine almost any CryptoNight coin

on: May 20, 2018, 02:07:18 AM

For any new folks just starting out and interested in one of the CryptoNight coins. Start to finish (wallet download, miner set-up, choosing a pool) guide to mining CrytoNight coins. Monero (XMR) Intense (ITNS) Graft (GRFT) Stellite (XTL) Bytecoin (BCN) Electroneum (ETN) DigitalNote (XDN) LeviarCoin (XLC) Karbo (KRB) Sumokoin (SUMO) Haven (XHV) Aeon (AEON) Turtlecoin (TRTL) Interplanetary Broadcast Coin (IPBC) https://www.youtube.com/watch?v=Dgn4nqq8XmM

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

on: May 19, 2018, 07:17:31 PM

Not sure my friend. But it broke mining on the rig. I recommend reloading windows and not allowing it to update to the latest version until the reason for the issue can be identified and fixed. Quote from: Jorkoto on May 19, 2018, 03:12:01 PM Quote from: Specialist1 on May 19, 2018, 03:59:01 AM I can confirm my issue was due to the latest update from Windows. I reloaded windows and paused the updates immediately so that it could not update. I loaded AMD Adrenalin Drivers 18.4.1, Cast XMR 1.0.0, and MSI Afterburner 4.5.0. The rig is up and running again with the old run.bat file as it was before the update. Quote from: Specialist1 on May 18, 2018, 05:21:01 PM gandolph3000, Have you noted any issues with the latest release/update on Win10? one of my rigs (2 card Vega56) updated (because I forgot to pause the updates) to the latest version/feature update 1803 build 17134.48. After the reboot, nothing works. No changes to the config. Tried uninstalling, DDU, reinstalling several times went back to 0.9.2 with the 18.3.4 AMD drivers. Same problem... Hangs here... [12:08:28] Initializing GPU, loading kernel ... Fast job switching mode enabled. Tried for giggles XMR Stak, upon compiling for the first time it does not even recognize the cards anymore and thus does not create the "amd" file to configure. I have 2 more 56/64 8x card rigs running Cast XMR 1.0.0 and 18.3.4 and the other is running 18.4.1 AMD drivers. Both have had updates paused for the last 3 weeks. No issues with either rig. Prior to the update, the rig in question was running 1.0.0 and 18.4.1 drivers with no issues. I have looked through everything I can think of exclusions, reg settings, unblock file, so on and so forth. Thank you, I have the same problem. I'm mining for 2 months on one Vega 64 running Cast XMR 1.0.0 and Crimson Relive Compute Driver and with the recommended by Gandalph settings I achieved stable 1900-2060 H/s. After the latest Win 10 update with the same configuration and settings, whatever I tried, I can't obtain more than 1420 H/s What's the problem with the latest Windows update ?

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

on: May 19, 2018, 03:59:01 AM

I can confirm my issue was due to the latest update from Windows. I reloaded windows and paused the updates immediately so that it could not update. I loaded AMD Adrenalin Drivers 18.4.1, Cast XMR 1.0.0, and MSI Afterburner 4.5.0. The rig is up and running again with the old run.bat file as it was before the update. Quote from: Specialist1 on May 18, 2018, 05:21:01 PM gandolph3000, Have you noted any issues with the latest release/update on Win10? one of my rigs (2 card Vega56) updated (because I forgot to pause the updates) to the latest version/feature update 1803 build 17134.48. After the reboot, nothing works. No changes to the config. Tried uninstalling, DDU, reinstalling several times went back to 0.9.2 with the 18.3.4 AMD drivers. Same problem... Hangs here... [12:08:28] Initializing GPU, loading kernel ... Fast job switching mode enabled. Tried for giggles XMR Stak, upon compiling for the first time it does not even recognize the cards anymore and thus does not create the "amd" file to configure. I have 2 more 56/64 8x card rigs running Cast XMR 1.0.0 and 18.3.4 and the other is running 18.4.1 AMD drivers. Both have had updates paused for the last 3 weeks. No issues with either rig. Prior to the update, the rig in question was running 1.0.0 and 18.4.1 drivers with no issues. I have looked through everything I can think of exclusions, reg settings, unblock file, so on and so forth. Thank you,

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

on: May 18, 2018, 05:21:01 PM

gandolph3000, Have you noted any issues with the latest release/update on Win10? one of my rigs (2 card Vega56) updated (because I forgot to pause the updates) to the latest version/feature update 1803 build 17134.48. After the reboot, nothing works. No changes to the config. Tried uninstalling, DDU, reinstalling several times went back to 0.9.2 with the 18.3.4 AMD drivers. Same problem... Hangs here... [12:08:28] Initializing GPU, loading kernel ... Fast job switching mode enabled. Tried for giggles XMR Stak, upon compiling for the first time it does not even recognize the cards anymore and thus does not create the "amd" file to configure. I have 2 more 56/64 8x card rigs running Cast XMR 1.0.0 and 18.3.4 and the other is running 18.4.1 AMD drivers. Both have had updates paused for the last 3 weeks. No issues with either rig. Prior to the update, the rig in question was running 1.0.0 and 18.4.1 drivers with no issues. I have looked through everything I can think of exclusions, reg settings, unblock file, so on and so forth. Thank you,

Alternate cryptocurrencies / Mining (Altcoins) / Electroneum Version 2 upgrade

on: May 18, 2018, 01:50:07 AM

ETN guys, this is a start to finish video - upgrading to the new Electroneum version 2.0 software. Everything you need to know. New Wallet software, New wallet set-up, importing of the new and old wallets. https://youtu.be/2hkJ0DOwxDY Hope this can help some folks out.

Alternate cryptocurrencies / Mining (Altcoins) / Re: I made over $900 more this month mining this!

on: May 16, 2018, 05:46:51 PM

Legendary! Quote from: xhomerx10 on May 16, 2018, 02:59:09 PM I made $9000 more from mining by eating this one weird food:

Alternate cryptocurrencies / Mining (Altcoins) / Re: I made over $900 more this month mining this!

on: May 16, 2018, 12:28:51 PM

Wow, I am just a small fish! Quote from: Philopolymath on May 15, 2018, 11:33:53 PM I spent $4500 on electricity this month...

Alternate cryptocurrencies / Mining (Altcoins) / Re: I made over $900 more this month mining this!

on: May 15, 2018, 07:12:06 PM

Hello, Yes, I would recommend it for the low amount of effort involved. I have been mining ETN through the app on my phone for about a month and a half now and have almost 400 ETN. Very little effort. I just look at it once or twice a day to make sure it is still running. Here is a link for more information on the Electroneum website. Goodluck! https://electroneum.com/ Quote from: Ms. CRYPTO ADVISER on May 15, 2018, 04:41:23 PM Can you use cellphone on mining ETN? would it be profitable if possible? Or i will just ended up bricking my phone?

Alternate cryptocurrencies / Mining (Altcoins) / Re: I made over $900 more this month mining this!

on: May 15, 2018, 04:32:53 PM

Hello, manji Watch the video if you get a chance, it will explain my results and reasoning. With the ASIC's on the ETN network, it makes more sense to mine something else, and just purchase the ETN, if you believe in the project. When the pow changes in 2 weeks, this will drastically change. Quote from: manji on May 15, 2018, 04:22:13 AM What do you use to mine it, GPUs or CPU without GPUs? If indeed, mining on ETN is a good profit why you want to switch the coin, if you want to switch must adjust to your GPU series (if mine with GPUs)

Pages: « 1 [2] 3 4 »