I sent a mail to contact@miningpoolhub.com 8 hours ago telling us-east & europe were not working, no reply so far... didn't see asia was working, switched to another pool, it will provide me a comparison... |
|
|
|
|
Hi all,
do you know why PhoenixMiner creates a file called "PhoenixMiner.Vexe" in the same directory (with windows process)?
|
|
|
|
New version update V14.0.  Strange, but on my mixed Nvidia rig (1060, 1070, 1070Ti), I don't see any change in hashrate when using "--mt" Tried values from 1 to 5. I believe it is usefull for 1080 & 1080TI only |
|
|
|
Hello guys, i have 5 gtx 1080ti and im getting 210MH/s (42MH/s each and consuming 160w each) with power75% +50 +650 clocksettings. im just using the miner and the PILL, and basically 0 configs
Any hints to pump these rookie numbers ?
you can try using straps instead of the pill by adding it on your cmd line (but the miner has to run in admin to set the straps): -nvdo 1 -straps 2 -mi 14 (with the straps, the +xxx on mem does almost nothing, I set mine to -200 for improved stability) you can test a bit higher in core, or increase your power to 85% (but more watts...) I am getting 45 MH/s @75%power, 47.5 @85% |
|
|
|
|
Hi all, FYI info:
GTX 1080 TI @+100 core +450 mem and 80%power load: 24MH/s on TTminer (206 W)
GTX 1070 @+170 core +550 mem and 80%power load: 14MH/s on TTminer (120 W)
and very similar with zenemy
|
|
|
|
|
Hi all,
were to take the latest atikmdag-patcher? the version I have doesn't work for the latest driver version...
and a fast search send me to atikmdag-patcher files that may be "strange"...
|
|
|
|
same here, I much prefer running em cool and quiet with minor performance impact
1.59 --oc1 enabled
1080ti
165w
~55 Sols
just for ref, what are your %power +mem +core ? (I use 70-75 %power +400 mem +110 core, ~52 Sols, my 1080ti is not stable with higher +core) |
|
|
|
Hi, "y" key at the initialization process of what?
For Claymore 14.7: -y enables Compute Mode and disables CrossFire for AMD cards. "-y 1" works as pressing "y" key when miner starts. This option works in Windows only.
If you are running older version before "y option" implemented , you can change it manually one by one in "Radeon Settings" or use "amd-compute-mode-switcher-script" available somewhere on the internet. Just use newest Claymore  thanks, will try with the latest Claymore, with the W10 1903 build update, my couple of RX480-580 switched to non compute mode and the Radeon settings doesn't opened anymore (it just appears in tasks but the window doesn't open)... I need to sort that out (I tried briefly to re-install the AMD driver, but then only one card was there in graphic cards instead of 2, reverted to latest restore point) |
|
|
|
I want to tell you about my experience today, well it might be helpful for those who experienced the same issue. My Windows 10 OS has been updated into the newest patch, thus made the AMD hashrate drop significantly. The workaround is straightforward. Press "y"-key at the initialization process to switch all cards to compute mode, reboot, and you are done!
Hi, "y" key at the initialization process of what? |
|
|
|
TDP is it power limit?
The Thermal Design Power of 100% is the nominal value for the card So if you set it to 70%, yes you limit the card to 70% of the nominal |
|
|
|
 RX 480 nitro + 1200/2000 - 0.46CPD blockhain driver. what are your settings, the basic ones below sieveSize = " 480"; weaveDepth = " 36864"; width = "auto"; windowSize = " 8192"; multiplierLimits = [ "25", "31", "34"]; |
|
|
|
Some results (ver 10.3 vs 10.5):
Radeon Vega 56: 0.7 CPD -> close to 0.8 CPD
Radeon Nano: 0.5 CPD -> close to 0.6 CPD
Radeon Rx 480: 0.4-0.42 CPD -> 0.43 CPD
Rx 480 doesn't give me 0.5 CPD, what sieve size and similar settings should I try to get there?
Hi all, what are your settings to get 0.43 CPD on RX480 (or 580...), mine seems a bit lower, it was some time ago but if I remember well, I tried many settings... |
|
|
|
Hi,
how do you set the starting diff for grin31? it starts at 16 and eventually goes down to 4, but I'd like to start it at 4 off the bat, thanks
it might depend on pool, usually, you can enter the diff via the password, something like that: -u address.worker:d=4 |
|
|
|
|
djm, no update planned for your AMD sgminer?
|
|
|
|
|
Hi all,
what pool are you using for Vollar / VDS?
|
|
|
|
|
1080ti, I use +115 clock + 475 mem for grin31 (I vary power 75 to 85%)
|
|
|
|
It seems no effect if I use the ohmygod pill or I'm using a wrong pill. I have old ethereum pill from ohmygod from github before it's working in ethereum but when I try to use ohmygodpill in Zcoin mining it doesn't seem to work? This is the complete name "OhGodAnETHlargementPill-master" can you provide the working for MTP? good improvement vs previous version, I get 4 MHh/s with 1080 ti and pill @85% power on mintpond, much higher than others...
(would be good to have nicehash, they sometimes pay more than regular mining!)
What version of driver you currently installed with 1080ti? driver is 430.64 |
|
|
|
|
and 2.2 MH/s on 1070 @ 85% power, also better than other miners & previous version
|
|
|
|
|
Show Posts
