Still running without freeze since 13 hours. But Hive shows 84% valid shares only, sparkpool too.

After 2 hours I have nearly 15% rejected shares 
But sparkpool predicts nevertheless 10% more revenue then with C29 before.

1 hour update: Miner is still running but accepted share rate is <90%!
With C29 Bminer finally reaced >95% accepted shares.

HiveOS with v15 and 6x 1070 [Core +100 | MEM +0 | PL 85W]
C29 is mining with 22,8 gps
C31 is mining with 3,8 gps

C31 is running since 10 minutes, I will check if miner dies ...

HiveOS with Gminer 1.31
6x GTX1070 8GB [Core+100|MEM+0|PL85W]

Running with C31 at 2.2 gps but I don't geht accepted shares at sparkpool 
C29 is running at 22.4 gps

today I started mining grin@sparkpool with 6x 1070 (nonTI).

Here are my results till now:
Bminer 13.1.0 | HiveOS 0.6-10@190123

• Core 0 | MEM +400 | PL 135W
  25,6 gps
• Core 0 | MEM +400 | PL 100W
  23,4 gps
• Core 0 | MEM +400 | PL 90W
  22,1 gps
• Core 0 | MEM +400 | PL 80W
  21,1 gps
• Core 0 | MEM +400 | PL 75W
  19,8 gps
• Core 100 | MEM 0 | PL 80W
  21,6 gps

I will continue testing with MEM- and Core-Clock

Edit: atm I have about 7-9% rejected shares

Sound good. ATM I'm using hive, I think I will try yours.

+1

I prefor PROP instead of others.

Furtermore I check if Complete block & uncle rewards paid to miners. For me, at least one block should be found every day (50-60 MH/s).

Do you really mean core voltage or isn't it core clock!?

Can you tell me what's the benefit of setting the TDP to such an low value together with increasing the core voltage? What speed (core clock) are your cards running at with these settings?

Oh really? Also with 65% TDP?

I have 6 Zotac Mini GTX 1070 (Asrock h81 BTC r2.0 / Thermaltake RBG 850W Gold / 8GB) .

My best efficiency for ETH is:

• TDP: 63%
• Core: +0 (1300-1500)
• Mem: +400 (4200MHz)
• Fan: 80%
• Miner: Claymore v11.5
• Driver: 391.01
• ambient temperature: 17°C (62,6°F)
• card temperature: 43°C-53°C (109,4°F-127,4°F)
  
• Pool: ethermine
• MH/s: avg. 175
• Wall: 650W

I have 6 Zotac Mini GTX 1070 (Asrock h81 BTC r2.0 / Thermaltake RBG 850W Gold / 8GB) .

My best efficiency for ZCash is:

• TDP: 65%
• Core: +50 (1580-1607)
• Mem: +200 (4000MHz)
• Fan: 80%
• Miner: DSTM 0.6
• Driver: 391.01
• ambient temperature: 17°C (62,6°F)
• card temperature: 43°C-53°C (109,4°F-127,4°F)
  
• Pool: flypool
• sol/s: avg. 2500
• Wall: 680W

Can U please explain the unpacking with x64dbg a bit more detailed.
Is it right to first find the entry point and step through the programm with "Trace into beyond trace record"? But I did not come to the point where I can get a usefull graph of the programm. And futher not to the step to set breakpoint or unpack with scylla.

Same here with Win7: "Color mode not supported"  

Yes, if other coins raise and less guys mine ZEC .

Same here. Difficulty is between 8-10. A few days ago it has been betwen 6 and 9, somethimes 10.

So I'm afraid that it is the difficulty. Even whattomine shows the worse revenue.

850W are enough, even with overclocking.

I have six 1070 @65% TDP with a 850W PU. It draws 680W from the wall.

Hallo zusammen,

ich habe ein mMn tolles Gadget entdeckt. Es sind sog. Riser-Card-Locks welche die Platine an den 1x PCIe fixieren. So sind die PCBs fest mit den PCIe Slots verbunden und können sich nicht lockern, lösen, verschieben.

Hier ein Blog-Eintrag dazu: http://cryptomining-blog.com/9405-a-3d-printable-pci-e-riser-lock-can-save-a-lot-of-headaches/

Ich kann die Teile Drucken (HiPS, schwarz, Layer 0,2mm) und in 10er Packs für 15€ inkl. Versand anbieten.

Besteht Interesse?



Danke an totembe für den Relese auf thingeverse.

How often do you reboot your rig or restart your miner?