____________________________________________________________________________ANNOUNCEMENT:
Source code updated to v1.1. https://github.com/creamcoin/CREAM-cryptocurrency
It's mandatory update, please everybody update.
changelog:
-fix sync connection and sync issue
-changed Ports !!
p2p=36066
rpc=37077
Windows and Linux wallet updated as well, please update, it's mandatory.
Find them on the first page of this thread or, on the cream websites.
If you get "time wrong" error, backup wallet.dat with your coins, remove it from your roaming/Cream directory, start wallet, and let it sync to the end for 20 min, then just replace your wallet dat and restart it.
I just tested, and i've got "time wrong" error few times, that's i am writing this. If it's issue that makes probems, will be fixed in the next update.
____________________________________________________________________________
Linux compiling help for Cream:
Update, upgrade Ubuntu, and install dependencies. Copy paste the command below and enter Y where applicable:
1:
sudo apt-get update
2:
sudo apt-get upgrade
3:
sudo apt-get install build-essential libssl-dev libboost-all-dev git libdb5.1++-dev libminiupnpc-dev screen
4:
Git clone cream
git clone https://github.com/creamcoin/CREAM-cryptocurrency
5: Fix build detect platform error
cd cream | cd src | cd leveldb
then chmod +x build_detect_platform
6: compile creamd
cd ..
make -f makefile.unix
--
**(in case error: fatal error: opening dependency file obj/crypto/hmac_sha256.d: No such file or directory)**
mkdir obj/crypto
chmod +x leveldb/build_detect_platform
make -f makefile.unix USE_UPNP=-
I still get the "time wrong" error after following these steps. Can you confirm the error will not cause problems for staking coins in the wallet? Thanks |
|
|
|
Looking at the regular develop and communication from the Dev team,relatively low coin supply and differentiated tech, really strange this coin is so cheap.  Will stop complaining and be glad that at least once I am able to get in at a good buy point.  Should be a fantastic ride up to 13500 - 14000 sat at least!!!! |
|
|
|
What is this shit?  Yea, I think you are right. . . wallet has malware if that's the case. Really strange. Baidu, trendmicro and VBA finding it and no one else? I am suspicious It is really an issue |
|
|
|
Good news , I've received an email from TaaS team. Token holders receive 50% of fund earnings quarterly, further payout. and the payout will be send in the form of ETH. the expected payout per 1 TaaS token will be announced additionally together with funds performance report. distributed between 4th and 10th August, your TaaS tokens should be stored in
TaaS wallet;
open-Source & Client-Side Ether Wallet MyEtherWallet;
hardware wallets Trezor and Ledger;
exchanges that support TaaS token and payouts Livecoin.net;
Ethereum desktop wallet Mist or Parity.
99% sure but could someone confirm IMtoken wallet also would work to receive the payout? Thanks |
|
|
|
Bad news. Gofundme didn't like us raising money for a cryptocurrency, they ended our campaign. All donations have been refunded.
Thank you for your shown support.
It's alright we can still do this! Some exchanges will add a coin for free if we spam them with emails asking to add the coin. It's I guess unethical but it's worth a shot? Also IDK why everyone wants to get on bittrex... It's a good exchange but volume wise it's I think 5th or 10th place. We need to aim for BitThumb or Bitfinex!
We have already started a fund on our Slack/Facebook & Telegram Groups. All donations however small and large, are greatly appreciated! DAS & BTC Addresses Pinned in all of the mention groups. PM me if you need invitation. The mods for some reason don't allow us to post links to our own social groups.Cryptopia We are all very excited about the coin, but I suggest we focus on getting a fully syncing QT wallet. Without that we could get listed on polo and bittrex and it would not matter. Gotta have a wallet that works for the novice if you want to see the price skyrocket IMHO |
|
|
|
anybody know what i am doing wrong?

Not capable masternode: Could not connect to 62.238.79.24:9399
This usually means the port 9399 is not open on your router / computer. Open the port on your router using the port forwarding function and go here and check http://ping.eu/port-chk/ to check again. |
|
|
|
I'm planning to setup a PoS station for ARC.
How many ARC will I need to get good staking returns?
I have a Windows Server for staking that can run 24x7.
Appreciate any advise. Did not read the entire thread but if there a links to assist a noob will be greatly appreciated. Thanks!
Hi ARC only "stakes" via a masternode. Instructions on how to start are on the website. You will need 1000 coins to start a masternode. Currently I receive roughly 7 coins a day via the masternode. Good Luck! |
|
|
|
Check the block explorer, not all those mines coins exist on the 12.2 blockchain. It is a mix of 12.1 and 12.2... |
|
|
|
I have several MN and all of them I get profit. ------------------------------------------------- Just some people want to get cheap buy DAS. Do not be fussed  Going to hold my coins too. One more wallet fix and this thing can get back on track. Dev, eta on that fix hexpool and others helped prepare? |
|
|
|
Dear, i think we've found the solution for the 12.2 error. I'll updated hexpool.com already to 12.2 with the bugfix running and informed other pool owner and dev as well. Best would be to just keep your nodes running as is for now and wait for updated wallet. My getblocktemplate error is now gone.  Best how did you get that error to go away? im still having it I recompiled with a fix. i sent the fix already to dev, let us wait for him to release an official version, so that we don't have 100 versions in the wild Thanks for doing this. Really nice thing to do. Going to move your pool to the top of my list and throw some hash power against it. |
|
|
|
I hope the developer wouldn't abandon this again just like what he did to the last coin. I hope this is not Part 2 of it.  I think not because everything working fine. Just some stupids here who are on the wrong chain crying like babys. For me everything is fine and my Masternodes get paid. I might give it a try once the Mac wallets are released but you can't blame people for having complaints about a masternodes performance they are suppose to be solid income and kinda hard when they either crash or get on the wrong chain. Hopefully the dev can polish the performance with the next releases after they get some rest. Ah. I see. How do you solve? Ah. I see. How do you solve? The problem is the most are here really noobs. They need a tutorial for everythink. If you now how mn work and you are able to use a console than you have 0 problems here OMG, Finally. we have an expert here. Please SIR answer my question. I rent some hash and point it to the pool in the OP (hexpool). After hours and hours of mining (I have paid for) mr. hexpool says "hey, we are on the fork". Mr expert, in your humble opinion, have I being fucked by hexpool? The problem is the hexpool owner. he dont know what he is doing And here we get to the conclusion, a lot of people (including you) know what they are doing ARE YOU HEXPOOL OWNER? Welcome to the bitcoin world guys, meat mincer of virtual wealth. If you've read the thread you would have noticed that we are very active in this thread. This is no scam, updating to the latest wallet just made all immature blocks orphaned (as they didn't include MN payments). So nevertheless, chain will NOT sync from any of the 12.2 nodes - ALL 12.2 nodes report height/synced_blocks status -1 - which means they all are thinking they are still downloading blocks. I agree. How do you solve? |
|
|
|
From my point of view we are good now. My MN is getting paid, Still lots of 12.1 wallets out there but chain seems fine now
Agree. Think it is OK. I had to temp ban 12.1 peers until they upgrade, but now seems OK. I have not yet received a MN payment. Could you post a screenshot or transaction Id of MN payment to build confidence? |
|
|
|
did you add the nodes, explorer is fully synced afaik
I also get fully synced - but wallet thinks still it is not up2date. Just shutdown my node that was on 12.1 - one less old one on the list |
|
|
|
Hi i am trying to setup arcticcoin master node but when i tryt o pass this command Code: goldmine genkey form this link https://arcticcoin.org/en-EN/guides-goldminei am getting this error " Method not found (code -32601) " Do you any one what is issue and how to solve this iisue Can confirm this guide works just with one minor correction where it says use "goldmine genkey" you should actually type "goldminenode genkey". just got my first 7.2 coins masternode payment |
|
|
|
Hey can someone help. I keep getting this when i try to start the goldminenode: "Not capable goldminenode: Goldminenode not in goldminenode list" And I already setup the conf files correctly, so is there something else I should do, I'm using my windows desktop? Well I guess there's no one here that can help me out right? You used http://ping.eu/port-chk/ and it says open? I checked the other guys that had the issue and it said "closed"... |
|
|
|
oke i setup my golddigger...but when do i get coins?
Did you get "enabled" as result? yes Same question. Been "Enabled" for 12 hours. Can see myself on Goldminenodes list etc, but have not received any coins yet. When do you start to receive coins? Thank you Perfect. Avg payout time is 28.87 hours currently if I am reading it right. Appreciate the help!
|
|
|
|
oke i setup my golddigger...but when do i get coins?
Did you get "enabled" as result? yes Same question. Been "Enabled" for 12 hours. Can see myself on Goldminenodes list etc, but have not received any coins yet. When do you start to receive coins? Thank you |
|
|
|
Hello!
I have 10k pink and started to stake 3 days ago my weight is 9k for now
But I didnt stake any pinkcoin
Why?
Hi- It can take some time for your network weight to build up. Being relatively new myself, best tip I received was to ensure you use the coin control feature to break your 10K coins into 10 blocks of 1000 coins. These blocks will build up weight quickly, but also give you more "chances" to stake. I watched a couple you tube videos that showed me how to do this. The developers also will send small airdrops out as well to add to balance along the way This is a really exciting coin with great potential, a solid dev team and a good message. By far the most "fun" of any coin I am holding! I have already split my 10K coins into 10 blocks. Waiting 4th day and nothing. How long do you have to wait when you started? It took me 6 days to get the staking going before I had my first stake. I had 25K coins to start. It became very regular after that like one every other day or so. |
|
|
|
Hello!
I have 10k pink and started to stake 3 days ago my weight is 9k for now
But I didnt stake any pinkcoin
Why?
Hi- It can take some time for your network weight to build up. Being relatively new myself, best tip I received was to ensure you use the coin control feature to break your 10K coins into 10 blocks of 1000 coins. These blocks will build up weight quickly, but also give you more "chances" to stake. I watched a couple you tube videos that showed me how to do this. The developers also will send small airdrops out as well to add to balance along the way This is a really exciting coin with great potential, a solid dev team and a good message. By far the most "fun" of any coin I am holding! |
|
|
|
Agree. So many things to like about this coin: -Stable code. -great posv3 design; easy for a newbie to get staking. -Trades on a major index: Bittrex Could go really far with some basic marketing and awareness. Also any chance we could get the blockchain explorer on cryptoid? I would be willing to pay for few months to get it started... |
|
|
|
|
Show Posts
