Hello Sev
i am using your tool and it's quite ok. I find a few problems:
1. Afterburner setting does not apply - i can see afterburner starts but no gpu / mem clock changes - it stays all the same (my settings before i used your MATM)
I checked the profiles in profile_e and profil_z - i cannot find any numbers of mem/gpu clock in those text files.
I started afterburned and saved my profile as profile 1 - also checked the files and there is no plain test number for the clocks - do you know in what parameter they stay ?
Maybe the afterburner version changed and that's why it does not work. I got 4.4.0 BETA 12
2. Should i setup the worker on my mininghub account (multi algo) or i just leave the default setinngs for all workers?
Hi MekMekPL
Thanks for using this tool.
1. Afterburner setting is loaded by 'Startup' function supported by MSI afterburner. The 'Startup' button(which looks like MS windows logo) on afterburner main page must be enabled.
When you make profiles on Afterburner, the setting files are saved in C:\Program Files (x86)\MSI Afterburner\Profiles.
As you already know, VEN_10DE....cfg files are palin text files with afterburner settins for eash GPUs.
You can just copy these files to profiles_z and profiles_e directory, and manually modify these texts for your settings by just adding these parameters on the top of each text files.
[Startup]
Format=2
PowerLimit=80
ThermalLimit=
CoreClkBoost=150000
MemClkBoost=400000
FanMode=0
FanSpeed=75
It is developed based on 0.4.3, but I found that it works well on 0.4.4 beta.
2. Don't need to make settings on MPH, just leave the default settings for all workers.
Show Posts
