Latest posts of: aik6

Show Posts
Pages: [1]

on: August 09, 2018, 11:28:26 AM

still mining, keep chain moving

on: July 11, 2018, 04:48:32 PM

this coin have a bright future, waiting for it

on: July 10, 2018, 06:25:38 PM

Good Project, i think it will have bright future

on: July 07, 2018, 08:56:12 PM

DEX network distributed through nodes so there will be no server downtime and network would still be able to run, good for trader or miner aik6#9721 1KhyQH6S3wBvPeQC2fnCnXu1WtyBPDgmd8

on: January 03, 2018, 06:53:03 PM

Quote from: spider703 on January 01, 2018, 10:09:51 PM Quote from: aik6 on December 31, 2017, 10:16:11 AM Hi Dev, i use your mining software for about > 4 days till now just want give litte info, hope will be useful for development process sometimes the miner just idle, no error or anything else, i already experience this 2 times until now, for my rig its happen when miner switch back to original coin after dev fee mining thank you for your hard work this my bat file :start hsrminer -a hsr -o stratum+tcp://hsr.mine.zpool.ca:7433 -u 1J6ERS9LjhRhXkifkVfdpbP56aY7TLqEoe -p home goto start even if the miner suddenly stops, he restarts himself wow great, i will give it a try thank you

on: December 31, 2017, 10:16:11 AM

Hi Dev, i use your mining software for about > 4 days till now just want give litte info, hope will be useful for development process sometimes the miner just idle, no error or anything else, i already experience this 2 times until now, for my rig its happen when miner switch back to original coin after dev fee mining thank you for your hard work

on: December 28, 2017, 04:21:32 PM

average result in my mix rig with HSRMINER_NEOSCRYPT_TEST GPU0 - Colorful GTX 1070 - TDP:70/Core:+180/Mem:-502/ ==> 1120 kH/s GPU1 - Palit GTX 1060/6GB Jetstream - PL:65/Core:+135/Mem:-502/ ==> 627 kH/s GPU2 - Gigabyte G1 GTX 1060/6GB - PL:50/Core:+135/Mem:-502/ ==> 647 kH/s GPU3 - ASUS ROG Strix GTX 1060/6GB - PL:58/Core:+150/Mem:-502/ ==> 748 kH/s GPU4 - Inno3d iChill GTX 1060/6GB - PL:64/Core:+150/Mem:-502/ ==> 740 kH/s GPU5 - Galax Exoc GTX 1060/6GB - PL:75/Core:+150/Mem:-502/ ==> 628 kH/s driver 388.71 total hash average 4550 kH/s old hash rate 4200 kH/s for my rig this miner is faster hope my information can help thank you

on: December 24, 2017, 05:22:37 PM

Quote from: Bender957 on December 23, 2017, 07:03:40 PM Hello All, Just noticed that i don't receive my coins to cryptopia They out from pool and i see transaction and confirmations through blockchain explorer But at cryptopia deposit page i even don't see this transaction as unconfirmed in history. just nothing. I open ticket to support but not receive answer yet. In this topic i see that other users also have these problems with cryptopia. Is this problem affect all of us or there is any people who don't have problem to deposit coins to cryptopia? Same with me, but in my case deposit stuck at 17 from 20 confirmation, that happen when i send more than 10 bwk, but if send lower than that, there is no problem i don't know what happen...i believe they will fix it

on: November 01, 2017, 05:39:44 PM

i choose 1st option Thank you

on: September 04, 2017, 07:45:28 PM

Quote from: alphaev7 on September 04, 2017, 05:20:07 AM Quote from: aik6 on September 03, 2017, 02:58:03 PM My result 4 GTX 1060 ether hashrate GPU0 - Asus Strix ROG GTX1060 6GB - power:58%, core:+100(1900), mem:+775(4677), fan:40%, temp:56C ==> 24.5 Mh/s GPU1 - Gigabyte GTX 1060 6GB G1 Gaming Edition - power:50%, core:+115(1847), mem:+850(4647), fan:50%, temp:59C ==> 24.5 Mh/s GPU2 - inno3d gtx 1060 6GB ichill x3 - power:65%, core:+100(1860), mem:+650(4551), fan:30%, temp:52C ==> 24 Mh/s GPU3 - GALAX GTX 1060 EX OC 6GB - power:75%, core:+130(1822), mem:+875(4677), fan:60%, temp:61C ==> 24.6 Mh/s All samsung memory current draw from each card approx 90w Driver version 382.53 Claymore 10.0 MSI Afterburner 4.3.0 Thanks for sharing. I'm new to this. Currently using 6 x Zotac P106-100 w/ Samsung memory - Power 75% / Core:+0(1695) / Mem: +500 (4513), fan: Auto, Temp: 62C ==> 23.7Mh/s Want to run in at this setting for at least 24hrs before moving higher, so your settings definitely helped. How do u test your limits and stop? your welcome, glad to hear my setting useful for others im testing usually until claymore show error code or driver crash and i also use NVSMI to see power limit and power draw from each card before apply it on Afterburner the highest one is Gigabyte : 180 W default

on: September 03, 2017, 02:58:03 PM

My result 4 GTX 1060 ether hashrate GPU0 - Asus Strix ROG GTX1060 6GB - power:58%, core:+100(1900), mem:+775(4677), fan:40%, temp:56C ==> 24.5 Mh/s GPU1 - Gigabyte GTX 1060 6GB G1 Gaming Edition - power:50%, core:+115(1847), mem:+850(4647), fan:50%, temp:59C ==> 24.5 Mh/s GPU2 - inno3d gtx 1060 6GB ichill x3 - power:65%, core:+100(1860), mem:+650(4551), fan:30%, temp:52C ==> 24 Mh/s GPU3 - GALAX GTX 1060 EX OC 6GB - power:75%, core:+130(1822), mem:+875(4677), fan:60%, temp:61C ==> 24.6 Mh/s All samsung memory current draw from each card approx 90w Driver version 382.53 Claymore 10.0 MSI Afterburner 4.3.0

on: August 17, 2017, 07:27:41 PM

Quote from: promomei on August 17, 2017, 05:50:52 PM Im getting 13.71 Mh/s on asus geforce gtx gaming strix 1060 6 gb is it okey? i've got 21 Mh/s with that card, using ccminer 2.2

Pages: [1]