Show Posts
|
Pages: [1]
|
Hi everyone,
this is not related to AM directly but... i got data from AM.
Can anyone confirm that X16r algo earnings from zpool, ahash etc? it pays like 30-40% more. but i doubt it because i have mined in zpool, ahash, zerg etc earlier this year but i got 50% less than in NH, in the end.
are those "pool-pool" still kinna ripoff?
thanks.
|
|
|
hi AM team,
a quick suggestion, can you put another option in "console window mode" as minimize window ? ie : to run all miners as minimized window.
thanks
|
|
|
hi zergpool team,
your x17 algo has many orphaned blocks, but the advertised mining profit is high. is this why pending line in the profit chart many times dropped for unknown reasons?
i am trying to exclude x17 for testing for now. i have to say this pool gave me way less earnings than ones with fees for now.
|
|
|
hashrefinery's neoscrypt has issue as well.
zpool's phi also has same problem.
are these deliberate? is the pool stealing hashes?
|
|
|
worse here... mine got down to KH/s instead of hundreds of MH/s... i am using ccminer alexis1.0 changing difficulty only helped abit.
|
|
|
Hi Patrike, Suggestions/request Please...: - Add ahashpool. - Add more miners (AMD & Nvidia) for all pools esp: zpool,ahashpool,hashrefinery. Some algos/coins are not available currently. trying to add my own have success and failure. for example: trying to add skein algo in AMD using sgminer 5.3.1 has failed, some how file "awesomeminer.conf" overwrite my params. - Enhance benchmark results by saving "running average" benchmark results as it mines. - Switch algo after the block is just found. for pools with PPLNS system, like MPH. - Create its own 24h/12h/6h running avg for coins prices if pools don't provide, like MPH, nicehash. This could be more accurate such that it can replace data from pools that provide 24h avg. Tuning on how you average them is key... this needs many tests tho. Thus, Awesome Miner ----> The Ultimate Miner.
|
|
|
Hi there,
I am testing awesome miner and MultiPoolMiner on MPH. since MPH use PPLNS system and i am used to PPS system in nicehash, i should not switch too often right? what is the best/optimal count down timer for switching algos? should i just switch algo once a day? or 30 min? or 1 hour?
thanks in advance.
you setup a batch loop and MPH switches you automatically but you have to be pointed at 12XXX ports. 17XXX for switching within the same algo pool. You want to switch right after a block is found. you get paid and you wait for confirm blocks to complete. Then they are your coins. Watch for payout mins and transmission fee. If you send the coins to the exchange for payout it can take 2 to 12 hours normally to return back to your coin of choice. Some slow trading coins could take several days and you have to watch the exchange, for example maxcoin only pays out best to bitcoin but can takes many days to convert. Bitcoin is the only coin that is a one way street. If it goes into bitcoin, it can't get back to the exchange to another coin. Bitcoin has a high minimum. see amounts. Site down is probably overload from all the nicehash people discovering this better site. MPM is great, i set it up as "-poolname miningpoolhub" as recommended. took hours to bench my rigs. but now all are running well. currently all miners are using 17xxx ports thou(lyra2re2 and equihash)... is 12xxx ports used by multi-algo in a program like sgminer/cgminer?
|
|
|
mining servers are also down, not just the webserver.
nicehash was hacked yday, is the hacking spree is in effect? damn...
|
|
|
Hi there,
I am testing awesome miner and MultiPoolMiner on MPH. since MPH use PPLNS system and i am used to PPS system in nicehash, i should not switch too often right? what is the best/optimal count down timer for switching algos? should i just switch algo once a day? or 30 min? or 1 hour?
thanks in advance.
|
|
|
Hi All, just curious, is the D3 antminer can mine other than x11? looking at one of baikal products, it can mine x11, x13, x15, qubit and quark. May be thru mods/hacks? this will surely make D3 back in business again thanks.
|
|
|
Windows 1709 update that came out today breaks Claymore 10. It says the opencl.dll is now missing and will not start.
Update: Reinstalling the video card driver corrected the problem. Turns out the Windows 1709 Update dumps the video driver.
is amd blockchain driver still compatible with win10 ver 1709? yesterday i reformatted 1 rig because of this unwantted upgrade.
|
|
|
Hi,
how much more profitable is winminer from nicehash? is this better in every way than NH? i am currently earning ~USD$22/day in NH. Many people are saying NH are paying too low... but many mining pools are too restricted by many rules and provide few coins only, which i don't like. and in current situation, multi algo mining is the way to go since ETH is not competitive anymore.
my objective is to take monthly payout, not holding them.
is this where i should mine?
thanks...
|
|
|
Hi,
I need help on reducing/eliminating rejection rate of second coin in dual mining. When dual mining eth + xxx, second coin always has (target) rejection rate1-4%. I am using claymore miner as a 3rd party miner in Nicehash.
According to the "interactive history chart" from nicehash web, I believe the highest rejection is "target". the second, some "stale" shares, then the third, there are very few "duplicates".
This happened to all, decred,sia,pascal,and lbry.
changing -dcri value does not matter much since it is not incorrect shares?
thank you..
|
|
|
I'm having a strange issue. I've read the last several pages as well as searched via Google for several hours. No dice. Here's the issue: I have 2 different GTX 970 rigs with 5 cards each. Testing them on ETH only mode. Before overclocking or anything, they all get about 18 Mh/s each. Here's the odd thing: 1 out of the 5 cards will be at around 11 MH/s.... i.e. GPU1. All speeds look equal in Afterburner. I'll restart the computer, and GPU1 will now be at 18 MH/s. But GPU2 will be down to 11. I'll restart the computer again. GPU0 will now be down to 11, all others at 18. So, it's not an issue with a card, because the dropped one changes on each restart. I have the same problem on both rigs. 1 card of 5 is always at 11-12 while the other 4 are at 18. One is an MSI board, the other is a brand new Biostar board. All have powered risers. I'll unplug one GPU, and just try with 4 GPU's. 1 card will be at 11-12, and other 3 at 18 MH/s. Restart, the slow card will be back at 18 but another card will be down to 11-12. It's driving me nuts! I downloaded the miner from Mega. One computer is running 9.7, the other 9.8. Same problem. So, it's not any particular GPU, not the miner version, not the motherboard, not the number of GPU's attached. What the heck is the problem? Somebody hacked into the miner?
i am not sure this will work, but try this: in NHM setting, check "NVIDIA p0 State" option.
|
|
|
Hi Mr Claymore,
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months. However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok. seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default. i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI. I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
You were hacked, as many other users I think. This morning on ethpool i saw few very suspicious miners One of them was at 561 GH/s in one moment, mining block every 30 minutes. Other was on 300 GH/s ... few are still active I think, you can check this two : http://ethpool.org/miners/faf37383b55051e2e4c6835d58c7048637838420http://ethpool.org/miners/97606dc346e7a23ebab1ddbcf6b50ee7b9bdd0cfthanks for replying, i think i might have temporary solution for the time being, i switched off UPnP in my router so that nothing get fwd-ed to my rigs. but i want to turn off management port completely off just to be sure. ===Martin
|
|
|
Hi Mr Claymore,
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months. However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok. seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default. i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI. I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
|
|
|
|