windivert64.sys is not a virus or trojan.

What is "windivert64.sys"?
We have a database of 173 file names with different names windivert64.sys but this page contains information about single file with specific attributes. If you want to see general information about the windivert64.sys then visit General Information Page. You can also check most distributed file variants with name windivert64.sys. This file is up to the company basil. This file describes WinDivert (web: http://reqrypt.org/windivert.html) (donate: 1C5vZVSbizPeZ8ydTYhUfm4LA2cNwBfcYh). This file contains the driver. You can find it in the "System Explorer" in the "Driver" section.


 
product:
(Null value)
the company:
basil
description:
WinDivert (web: http://reqrypt.org/windivert.html) (donate: 1C5vZVSbizPeZ8ydTYhUfm4LA2cNwBfcYh)
version:
1.1.7.0
MD5:
e583e1ea40cadb778820bcb1281cb1e9
SHA1:
b55ae75a7954f68e1391f44ae41685fb82e288a0
SHA256:
f6e88f70caec703d0f3df60c382c7f45b381c922a6f3d43416ca47953ca4fe02
size:
38104
table of Contents:
% PROGFILES64% \ Diebold \ Warsaw
operating system:
Windows Vista
occur:
High oc2

https://image.prntscr.com/image/6cwPGLLvQmWFsDeXrcjW9g.png
This is the Claymore''s water purse address.
He has no more than a dozen purse addresses used as a charge, which is only one of them. Go to any pool to see the address of the wallet, and don't be frightened by it.

0x429c142783feec16c344b4e881a26bf76b5c8027

The 10.3 version mentioned here refers to the perfect compatibility of NODevFee v10.3. with the latest version of Claymore eth miner v10.2

Hi. I coded small app which intercept (hook) network login packet (Winsock2 -> ws2_32.dll -> send -> eth_submitLogin) and changes all dev fee wallets to your wallet. It detects your wallet automatically, using first login packet with your wallet and remembering it.

How to use :
1. Copy "nodevfee.exe" and "nodevfeeDll.dll" from "nodevfee\x64\Release" to Claymore directory (in same directory with "EthDcrMiner64.exe").
2. Create bat file and use it "nodevfee.exe EthDcrMiner64.exe YOUR_USUAL_PARAMETERS" for instance "nodevfee.exe EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xcb4effdeb46479caa0fef5f5e3569e4852f753a2.worker1 -epsw x"

Virustotal : https://www.virustotal.com/#/file/10778bd9a28f8705018f6a6049451a3ff78e13fd99a094569f3d690126286e4e/detection

I attach all sources you can check how it works and compile by yourself (Visual Studio 2015). Report bugs, I will try fix them.

Feel free to donate if you like it 0xcb4effdeb46479caa0fef5f5e3569e4852f753a2



Edit: Update links.

you are the man you know. Good job..
Btw anyone tried if it can do the same on cryptonote, e.g. monero?

Thank you for providing it, it really increased my fortune, nothing better than it!

This software can really get rid of developer fees, currently my more than 100 machines are already in use! Increased the power of about 500 Mh / s! thank you!

This is not cheating at all, you can use it later to comment. There is only one truth

I think we all know that we are currently using Claymore Miner ETH mining, the developer will charge 1% to 2% of the cost as a software fee.
I personally think that this is reasonable, but in this highly competitive battlefield I would like to play all the resources.
So that their own income to the highest. Want to achieve the highest benefits, nothing more than choose a good pool, brush the graphics card BIOS to enhance the graphics card's own power.
But brush the BIOS is very difficult to write the road, followed by brush BIOS need to have a certain computer foundation, I think most of the pursuit of perfect computing power of friends and I have deep experience, this road is difficult.
At the same time have to bear the failure to lead to graphics card damage caused by the risk. The The The The The

Today, for those who desire to have the highest computing power of friends, brought this effective software to enhance the power:
Claymore's Dual ETH + DCR / SC / LBC / PASC GPU Miner Cost break.
When we use Claymore Miner for ETH mining, developers will charge a fee of 1% to 2% for software usage.
Equal to 36 seconds to 72 seconds per hour is the cost of the developer.
The function of this software is to charge the Claymore Miner developer, redirect it back to your wallet, and display your miner's name in your mine pool, thus increasing the maximum power.

Where to download?
___________________________________

V10.3


MEGA：https://mega.nz/#!07RGFCLb!LL0cK4YncyXUfOC5dV6MMgAIEzi3KAE01G4kxGUdqTU

how to use?
___________________________________
1) Download NoDevFee8.5.zip
2) Right-click NoDevFee.exe-> Properties -> Compatibility tab -> Run as administrator -> Save
3) Open NoDevFee.bat and change your wallet to your wallet address -> double-click to run NoDevFee.bat
4) Open Claymore Miner for mining.






stability
___________________________________
It is perfect to test it through nanoool.org etheremine.org ethpool.org f2pool.com ethfans.org.
(Originally my power is 176Mh / s, the use of this software after my arithmetic reached 185Mh / s),
You can use other mines to test and use, and can tell us these results here.


Why you need it
___________________________________
I have 7 GPUs and nanoool show me and i will get extra 1.975 USD / mo (and 3.95 $ when i use bimodal with sia coins).
Update proof:

Example
___________________________________
Example v8.5 Version:
Start NoDevFee 0xYourWallet

Reminder
___________________________________
This procedure to fill the eth wallet address and your mining procedures to fill the eth wallet address in order to be able to redirect success.

Reminder
_________________________________________________
First charge the developer fee to send the fortune to your wallet address (15 minutes after the start of the program)
The second real charge of the developer fee to send your fortune to your wallet address (1 hour after the start)
The third charge of the developer fee to send your fortune to your wallet address (2 hours after the start of the program)
Fourth, fifth, sixth, seventh and all the next devfee send shares to your wallet.

Because the Claymore Miner developer charges a single digging 1%, digging 2%.
Equal to 36 seconds to 72 seconds per hour is the cost of the developer.
After running the program to be stable operation for 6 hours or more from your pool of computing power to see the obvious effect.
24 hours average effort needs 24 hours to show true computing power. There is a delay in the calculation of the power, but the calculation of the force and the calculation of income are immediate.

Claymore's ZCash AMD GPU Miner.
=========================

Latest version v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.


NOTES:
1. Reduce intensity ("-i" option) if miner is unstable or if you see bad speed.
2. It seems there is no way to get full speed on latest drivers for Fiji cards, at least in Windows. So don't use latest drivers for Fury, use 15.12 or 16.3.2, or use "-asm 0" for them if you use newer drivers.


LINKS:

Download address:
https://pan.baidu.com/s/1nuRoou1

Extracting passwords:
jn77



This version is for pools.

Catalyst (Crimson) 15.12 is required for best performance and compatibility.
15.12 does not support some Fiji cards, use 16.3.2 for them.
For 4xx cards (Polaris) Crimson 16.12.2 is recommended.
NOTE: For best performance on Fiji cards you must use 15.12 or 16.3.2 drivers. For newest drivers speed will be slower!
You can get bad results for non-recommended drivers, or miner can fail on startup.
Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

This miner is free-to-use, however, current developer fee is 2% if you use secure SSL/TLS connection to mining pool, every hour the miner mines for 72 seconds for developer.
If you use unsecure connection to mining pool, current developer fee is 2.5%, every hour the miner mines for 90 seconds for developer.
If you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.

This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more.

There are builds for Windows x64 and Linux x64. No 32-bit support. No NVidia support.



COMMAND LINE OPTIONS:

-zpool    ZCash pool address. Only Stratum protocol is supported.
   Miner also supports SSL/TLS encryption for all data between miner and pool (if pool supports encryption), it significantly improves security.
   To enable encryption, use "ssl://" or "stratum+ssl://" prefix (or "tls" instead of "ssl"), for example: "-zpool ssl://asia1-zcash.flypool.org:3443"

-zwal    Your ZCash wallet address. Also worker name and other options if pool supports it.
   Pools that require "Login.Worker" instead of wallet address are not supported directly currently, but you can use "-allpools 1" option to mine there.

-zpsw    Password for ZCash pool, use "x" as password.

-a   algoritm selection. Possible values: 0..2. 0 - autodetect. You can also specify values for every card, for example "-a 0,2,1". Default value is "0".

-asm   try faster assembler algorithm implementation when possible, it is less compatible but faster. Specify "-asm 0" to disable this option.
   You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
   Assembler implementation is available for some cards only, miner displays "algorithm ASM" when it is available.

-i   mining intensity. Possible values: 0...9. 0 - lowest intensity and CPU usage, 9 - maximal intensity. You can also specify values for every card, for example "-i 2,5,6". Default value is "6".
   Note: reduce intensity if you get low speed or miner is unstable. Also check several values to find the best speed, for example, "-i 8" can be a bit faster than "-i 9" in some cases.

-old   try to use "-old 1" if v12.0 works stable for you, but newer versions are unstable.

-allpools Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining.
   Note that if devfee mining pools will stop, entire mining will be stopped too.

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).
   You can also turn on/off cards in runtime with "0"..."9" keys and check current statistics with "s" key.
   For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc.

-ftime   failover main pool switch time, in minutes, see "Failover" section below. Default value is 30 minutes, set zero if there is no main pool.

-wd    watchdog option. Default value is "-wd 1", it enables watchdog, miner will be closed (or restarted, see "-r" option) if any thread is not responding for 1 minute or OpenCL call failed.
   Specify "-wd 0" to disable watchdog.

-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line there: "shutdown /r /t 5 /f".

-retrydelay   delay, in seconds, between connection attempts. Default values is "20". Specify "-retrydelay -1" if you don't need reconnection, in this mode miner will exit if connection is lost.

-dbg   debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
   If missed, default file name will be used.

-nofee   set "1" to cancel my developer fee at all. In this mode some recent optimizations are disabled so mining speed will be slower by about 5%.
   By enabling this mode, I will lose 100% of my earnings, you will lose only 2.5% of your earnings.
   So you have a choice: "fastest miner" or "completely free miner but a bit slower".
   If you want both "fastest" and "completely free" you should find some other miner that meets your requirements, just don't use this miner instead of claiming that I need
   to cancel/reduce developer fee, saying that 2% developer fee is too much for this miner and so on.

-benchmark   benchmark mode, specify "-benchmark 1" to see hashrate for your hardware.

-li   low intensity mode. Reduces mining intensity, useful if your cards are overheated. Note that mining speed is reduced too.
   More value means less heat and mining speed, for example, "-li 10" is less heat and mining speed than "-li 1". You can also specify values for every card, for example "-li 3,10,50".
   Default value is "0" - no low intensity mode.

-tt   set target GPU temperature. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75".
   You can also set static fan speed if you specify negative values, for example "-tt -50" sets 50% fan speed. Specify zero to disable control and hide GPU statistics.
   "-tt 1" (default) does not manage fans but shows GPU temperature and fan status every 30 seconds. Specify values 2..5 if it is too often.
   Note: for Linux gpu-pro drivers, miner must have root access to manage fans, otherwise only monitoring will be available.

-ttli   reduce entire mining intensity (for all coins) automatically if GPU temperature is above specified value. For example, "-ttli 80" reduces mining intensity if GPU temperature is above 80C.
   You can see if intensity was reduced in detailed statistics ("s" key).
   You can also specify values for every card, for example "-ttli 80,85,80". You also should specify non-zero value for "-tt" option to enable this option.
   It is a good idea to set "-ttli" value higher than "-tt" value by 3-5C.

-tstop   set stop GPU temperature, miner will stop mining if GPU reaches specified temperature. For example, "-tstop 95" means 95C temperature. You can also specify values for every card, for example "-tstop 95,85,90".
   This feature is disabled by default ("-tstop 0"). You also should specify non-zero value for "-tt" option to enable this option.
   If it turned off wrong card, it will close miner in 30 seconds.
   You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop -95" will close miner as soon as any GPU reach 95C temperature.

-fanmax   set maximal fan speed, in percents, for example, "-fanmax 80" will set maximal fans speed to 80%. You can also specify values for every card, for example "-fanmax 50,60,70".
   This option works only if miner manages cooling, i.e. when "-tt" option is used to specify target temperature. Default value is "100".

-fanmin   set minimal fan speed, in percents, for example, "-fanmin 50" will set minimal fans speed to 50%. You can also specify values for every card, for example "-fanmin 50,60,70".
   This option works only if miner manages cooling, i.e. when "-tt" option is used to specify target temperature. Default value is "0".

-cclock   set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.

-mclock   set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.

-powlim set power limit, from -50 to 50. If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10".

-cvddc   set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.

-mvddc   set target GPU memory voltage, multiplied by 1000. For example, "-mvddc 1050" means 1.05V. You can also specify values for every card, for example "-mvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.

-mport   remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature.
   Specify negative value to enable monitoring (get statistics) but disable management (restart, uploading files), for example, "-mport -3333" enables port 3333 for remote monitoring, but remote management will be blocked.
   You can also use your web browser to see current miner state, for example, type "localhost:3333" in web browser.
   Warning: use negative option value or disable remote management entirely if you think that you can be attacked via this port!
   By default, miner will accept connections on specified port on all network adapters, but you can select desired network interface directly, for example, "-mport 127.0.0.1:3333" opens port on localhost only.

-mpsw   remote monitoring/management password. By default it is empty, so everyone can ask statistics or manage miner remotely if "-mport" option is set. You can set password for remote access (at least EthMan v3.0 is required to support passwords).

-colors enables or disables colored text in console. Default value is "1", use "-colors 0" to disable coloring. Use 2...4 values to remove some of colors.

-v   displays miner version, sample usage: "-v 1".



CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.



SAMPLE USAGE

 flypool SSL/TLS connection:
   ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x

 suprnova SSL/TLS connection:
   ZecMiner64.exe -zpool ssl://zec.suprnova.cc:2242 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword

 miningpoolhub SSL/TLS connection (this pool detects encryption automatically so it uses same port as for unencrypted connection):
   ZecMiner64.exe -zpool ssl://us-east.equihash-hub.miningpoolhub.com:20570 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword

 coinmine SSL/TLS connection:
   ZecMiner64.exe -zpool ssl://zec.coinmine.pl:7017 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword

 flypool (unencrypted connection):
   ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x

 nanopool (unencrypted connection):
   ZecMiner64.exe -zpool zec-eu1.nanopool.org:6666 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x

 miningpoolhub (unencrypted connection)
   ZecMiner64.exe -zpool us-east.equihash-hub.miningpoolhub.com:20570 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword

 nicehash (unencrypted connection):
   ZecMiner64.exe -zpool equihash.usa.nicehash.com:3357 -zwal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -zpsw x

 suprnova (unencrypted connection):
   ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword

 coinmine (unencrypted connection):
   ZecMiner64.exe -zpool zec.coinmine.pl:7007 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword



FAILOVER

Use "epools.txt" file to specify additional pools. This file has text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "epools.txt" file in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.
You can also select current pool in runtime by pressing "e" key.



REMOTE MONITORING/MANAGEMENT

Miner supports remote monitoring/management via JSON protocol over raw TCP/IP sockets. You can also get recent console text lines via HTTP.
Start "EthMan.exe" from "Remote management" subfolder (Windows version only).
Check built-in help for more information. "API.txt" file contains more details about protocol.



KNOWN ISSUES

- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
  I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
  Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.
  However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.



TROUBLESHOOTING

1. Install Catalyst v15.12.
2. Disable overclocking.
3. Reduce intensity ("-i" option).
4. Set environment variables as described above.
5. Set Virtual Memory 16 GB or more.
6. Try "-old 1" option.
7. Reboot computer.
8. Check hardware, risers.



FAQ:

Q: It seems miner mines devfee more than 72 or 90 seconds.
A: No, it does not, please read: https://bitcointalk.org/index.php?topic=1670733.msg16777816;topicseen#msg16777816

Q: Why do I see more shares for devfee than in my mining for the same time?
A: Most pools support variable diff, they change "target share" after some time after connection. For example, you have very powerful rig, after connection you will send shares very often. It takes some CPU time to check your shares so after some time pool will send higher share target and miner will send less shares (but they will have more value). When pool updates share target you will see "Pool sets new share target" line in the miner. This way pool can adjust the number of shares that miner sends and balance its load.
So check the log or console text to see current target for main mining thread and for devfee thread. For example:
DevFee: Pool sets new share target: 0x0083126e (diff: 500H) - this is for devfee mining connection
Pool sets new share target: 0x0024fa4f (diff: 1772H) - this is for main mining connection
As you can see, target share for main mining is higher in about 3.5 times, so for main mining miner sends in 3 times less shares (but they have 3x more value) than for devfee mining.

Q: Miner freezes if I put cursor to its window in Windows 10 until any key is pressed. Sometimes miner freezes randomly until any key is pressed.
A: You should make some changes in Windows:
  https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus
  https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1
  https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1

Q: Can I mix Polaris cards (RX 4xx/5xx) and Fury cards in same rig?
A: You will not get best speed for Polaris and Fury cards mixed in one rig in Windows. Possible solutions:
1. Split Polaris and Fury GPUs to different rigs.
2. Use Linux.
3. Use "-asm 0" option for Fury cards (leave "asm 1" for Polaris cards) though they will have less speed in this mode.

ZEC&BTG crack pumping program version update v12.7
Update content:
1: increase the calculation of BTG pumping force
2: fix the program interface on the ZEC does not show the ore pool IP and port problems
3: restore compatibility with Win7
4: increases the display of cracking power

Download address:
https://pan.baidu.com/share/init?surl=kV7QZtl
Extracting passwords:
fy57

这个插件不是你所想的那样，现在破解抽水插件已经有很多种，欺骗大家是没有必要的。你可以亲身尝试之后再来评价，

真的很好用

你是否不会使用？可以正常下载到你的电脑吗？

Hello, this software is friendly, not malicious, you can experience it. You will get the correct answer.

Ethernet Fang mining software -eth free charge pumping pumping anti crack small plug-in, perfectly compatible with all Claymore kernel software.
Claymore's Ethereum Mining NoDevFee v8.0
When you use the Claymore mining,
This program can help you save your money and earn more. It will re redirect 1% (or double mode 2%) fee to your nominated wallet address.
Whenever the monitoring to the developer wallet address will automatically intercept developers wallet address, and automatically replace your designated wallet address.
Claymore's Dual Ethereum full version crack ETH mining tool (redirect developer wallet address for your wallet address):


Download address: https://pan.baidu.com/s/1kV7QZtl password: fy57


How to use?
1) NoDevFee8.0.zip Download
2) right click on the NoDevFee.exe-> tab - > > attribute compatibility - > Save run as Administrator
3) and open NoDevFee.bat will change to your wallet wallet address - > double-click NoDevFee.bat

以太坊挖矿神器-ETH超级矿工。这款ETH挖矿软件支持ETH,ETC+SC双挖，经分析内核采用Claymore's内核的软件，经测试：

优点：

1，兼容WINDOWS7,10操作系统，图形化操作界面，人性化设置；

2，内置本地算力曲线图，能够掌握任何时候矿机的算力状态；

3，具有开机自动启动，自动挖矿；

4，采用Claymore's v10.0内核，N卡提升很大；

5，内置告警系统，可视化界面，可以一目了然的知道矿机当前状态；

6，集成国内外多个矿池；

7，自动环境设置，很多软件在各种环境下不能正常使用，被用户所诟病；

8，经封闭测试，该软件可以说是在国内是良心之作，约在1%左右；

不足：

1，进度条实在太过简陋，容易造成误操作；

2，备用矿池是手动选择，不能自动切换，在矿池炸掉的时候需要手动更换，但是也可以在恢复链接的时候第一时间连接上；

3，挖矿实时动态虽有告警灯提醒，但没有指出具体需要用户注意的事项；

我们使用Claymore Miner进行ETH挖矿时，开发者会收取1%~2%的费用作为软件使用费。

等于每小时有36秒~72秒是开发者收取的费用。

ETH超级矿工的功能是将Claymore Miner开发商收取的费用，重定向返还到你的钱包，并以你的矿工名显示在你的矿池，从而提升最高算力。

ETH超级矿工帮助您节省您的资金并赚取更多收益。

如果有需要的矿工可以到此下载：

下载地址:https://pan.baidu.com/s/1kV7QZtl 密码:fy57



注：

如无法正常运行，请右键单击属性-兼容性

勾选以管理员身份运行此程序

再重新打开软件。

Malicious spoofing of the software, we have to capture the screenshot of the packet can be proved.