 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
4
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] TeamRedMiner 0.5.0 - Cryptonight Thread - High hashrate, Low Power
|
on: June 07, 2019, 01:44:55 PM
|
Wow, that sounds very strange. Do you have other ref V56s in the other rigs using the same timings? If so, what does the auto-tuning choose for those gpus?
i have other rigs with vega56 ref (sams mem) but different brends, they all use lucky timings from trm help file on one rig autotune sets 14*13:AAA and on another 14*14:AAA but all of my vegas56 (expect those x3 that i describe before) gives average 2230-2300 h/s on cnr p.s. may be i don't know it's problem from motherboard?! i have h110 asrock btc pro (13 pci-e) and celeron 2.8ghz, 4gb ram |
|
|
|
|
5
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] TeamRedMiner 0.5.0 - Cryptonight Thread - High hashrate, Low Power
|
on: June 07, 2019, 12:33:02 PM
|
|
it's strange situation:
- win 10 1709, updates are off
- pagefile 75gb
- mixed rig: 5x-rx570(4gb)+3x-vega56 (ref, not flashed, sams memory)
trm 0.4.5 with my manual timings tuning: cnr 11.77kh/s (vegas gives 2230-2250)
trm 0.5 with auto-tuning gives only 11kh/s (vegas gives only 1980-1950)
autotuning from trm 0.5 set for all vegas 14+14:AAA, but if i manualy change it to 14*14:AAA there is no difference
but my manual timings for vegas is from trm help file so i don't understand =]
p.s. on my other rigs all vegas works even faster with trm 0.5 and autotuning
|
|
|
|
|
19
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.6
|
on: June 03, 2018, 11:59:03 AM
|
From the logs i can see that this isn't probably related to devfee-user pool switching, because after the devfee finished, you got jobs and accepted results from your pool, so the switchback was successful.
[2018-06-03 03:09:20] switch_pool: Disconnected from devfee pool, now mining for user
[2018-06-03 03:10:26] hashrate: GPU0: 964 H/S [BUS:5]
[2018-06-03 03:10:26] hashrate: GPU1: 1013 H/S [BUS:6]
[2018-06-03 03:10:26] hashrate: GPU2: 1017 H/S [BUS:2]
[2018-06-03 03:10:26] hashrate: GPU3: 964 H/S [BUS:4]
[2018-06-03 03:10:26] hashrate: GPU4: 952 H/S [BUS:1]
[2018-06-03 03:10:26] hashrate: Total: 4910 H/S
[2018-06-03 03:10:59] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"010193e4ccd805375fd1190a992e2b57929b47ae079a998a31bc7e1c11111a5a43e932b87519c20 0000000e510944a66dda1a13a8c31101b4cd678c25c109320e76a7936b82ff0fc10938201","job_id":"436392239714041","target":"d96f0000"}}
[2018-06-03 03:10:59] pool_have_job: Pool sent a new job (ID: 436392239714041)
[2018-06-03 03:11:09] miner_result: Sending user result to pool
[2018-06-03 03:11:09] json_send: {"method":"submit","params":{"id":"316536043444648","job_id":"436392239714041","nonce":"964033b3","result":"23e46068b4c15131a3d638b862f4988b4f810f82aa7b46a2d4cf0a91360b0000"},"id":1}
[2018-06-03 03:11:09] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-06-03 03:11:09] miner_result: Pool accepted result 0x00000B36
also there are new jobs/accepted shares after this before the fun begins :
[2018-06-03 03:31:29] json_receive: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Unauthenticated"}}
[2018-06-03 03:31:29] miner_result: You are not authenticated to the pool
[2018-06-03 03:31:29] miner_result: Pool rejected result 0x00003690 (unauthenticated)
[2018-06-03 03:31:29] miner_result: Network error
[2018-06-03 03:31:29] miner_result: Network error
The 0 hashing speed in this case is normal, because the GPU's are not working on any job.
This looks like some kind of pool problem to me.
it's happens on different pools and different algos |
|
|
|
|
20
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.6
|
on: June 03, 2018, 12:42:57 AM
|
v. 1.5.6 still have problem - if some gpus stop hashing the miner not hangs but just stoped and not showing any information further. So if i see that and press some key (space or h for example) it will show that gpu's hash speed is 0 and make reconnect to pool and after it will work good for some time.
sorry but i dont understand,can you turn on logging and share that?  so marked area is when i see that one of rigs do no sending shares more than 2 minutes. Miner just not doing anything after returning to user mining and than i have to press H or S and see hash speed is 0 it's v 1.5.6 p.s. i have to admit that in v 1.5.6 this situations happens not often how is that time is jumping : 16:56:39 17:03:3316:57:40 16:57:17after that is all good. Have you turned on logging as i asked? finally i have got logs:   LOGS - http://www.filedropper.com/log_9 |
|
|
|
|
