|
Can you add XLM or XRP for payments?
Those are almost without transaction fees and ultra fast.
|
|
|
|
OMG just found my old desktop and found old xmg wallet but no exchange to sell  . Found a lotto ticket but cant claim.... Last week I bought XMG in https://btcpop.co/ @ 7 sat. Just checked again: still some buy/sell orders there @ 6/8 sat. |
|
|
|
Thank you, Gen3 + enabled 4g decoding
Thanks! Will try tomorrow... have only remote monitoring to that "rig" atm: gpu0 -- 23.84 MH/s gpu1 -- 24.56 MH/s not good at all... even my old spare H81 with 1 x RX470 gives 27.55 MH/s |
|
|
|
RX470 4G cards on Asus Z170 PRO GAMING directly on PCI Express 16x slot 1st rig 3x Sapphire RX470 Nitro 4GB Hynix   2nd rig 3x XFX RX470 Black Edition 4GB Hynix   Nice work! Do You use: Gen1,2,3 or auto? Above 4G decoding: disabled or enabled? |
|
|
|
|
2-nd day mining ETH with TRM:
Polaris 8GB - uptime 30h @ 30+ MH/s and power consumption is low! Good job!
Polaris 4GB - crash after crash after hang after crash and so on...
Rig is not broken: tested it with ETC and all good.
Can someone please share basic Linux command line and oc/uv settings for 4GB RX470/570 cards to mine ETH?
|
|
|
|
Hello everyone! First day with TRM  Can I use Phoenix settings with my RX470 8GB Samsung rigs or can I get more energy saving & shares with different settings? Atm using B-mode 1106/2100 @ 868mV (was rock stabla with Phoenix) And what about RX470 4GB Elpida/Hynix rig? Atm using max_alloc 4076 1106/1900 @ 850mV OS: SMOS 5.4.52-sm10 Driver: amd20.30r5.6.7 |
|
|
|
Try:
--coin ETH --pool eu1.ethermine.org:4444 --user 0xXXXXXXXXXXXXXXXXXXXXXXXXX.XX --pass xxx --apiport 4444 - - 4g-alloc-size 4078 --tstop 85 --tstart 50
If doesn't work try 4076 or 4074 or 4072 ... I have take out --zombie-tune because In the 1.19 it does it automatically. I also put the --tstart to return to mine 😉
Thanks! 1.19 gives better hashrate! I don't use --tstart, because if GPU reaches 85C, then something needs definitely fixing (fans, thermal paste, etc.) and there is no point to do more damage by starting it over and over again. |
|
|
|
Hello all,
I am a newbie for mining ETH. I have 2 AMD cards and use lolMiner 1.18a. One is RX470, another one is RX570.
When I began mining ETH. I found my two cards Hashing rate were 22H/s, 24H/s respectively.
1) What I can do on my cards modding up to 30H/s like other people?
Moreover, I found the temperature around 74C degree even they were at lower hashing rate.
2) Would I need to lower the core voltage in order to get cooler temperature?
Thank you for your helps! 1) 4GB -- normal hashrate 19 - 20 MH/s 8GB -- 29 - 31 MH/s 2) start with 900 mV and then try to go lower (some of my rigs can handle 868 mV, some are at 881 mV) |
|
|
|
Why 1.19 instantly crashes with 1.18 settings? What do I need to change? Do I need that 1.19 at all?
Can you put your settings or config line to see if we can find the problem?... --coin ETH --pool eu1.ethermine.org:4444 --user 0xXXXXXXXXXXXXXXXXXXXXXXXXX.XX --pass xxx --apiport 4444 --keepfree 5 --tstop 85 --zombie-tune 2 |
|
|
|
|
Why 1.19 instantly crashes with 1.18 settings? What do I need to change? Do I need that 1.19 at all?
|
|
|
|
|
Hello again!
I have a problem with my new rig: 3 x Asus RX470 Mining, 2 x Sapphire RX570 Pulse
Asus cards are going to zero rpm fan mode and after reaching target temperature roaring to 80 - 100%, thats very noisy!
Sapphire cards are at 23 - 26% fan speed below 70C, almost no noise.
How to disable 0 rpm mode and force a minimum fan speed to those Asus cards??
|
|
|
|
Thank You! SM-5.0. gives better hashrate indeed and I managed to lower core to 862mV Now 6 x RX470 rig total power consumption is 820W and gives 183 MH/s You got a new customer Keep up the good work! edit: similar rig with better PSU (Evga 1300) working at 780W, nice! |
|
|
|
|
Made a test today with 2 almost identical 6 x RX470 8GB rigs, same settings, same pool, same Phoenix eth miner: (used watt meter and pool data)
SMOS rig gives 2 % better hashrate, but consumes 9 % more energy then win 10 rig.
Bad surprise...
|
|
|
|
SO , I`m using the last version of Phoenix miner (5.3b) and some blockchain drivers (17,4 - I think) for my AMD $X 470 . But I cannot undervolt my cards and they drain a lot of power from the wall . With almost 200w more than claymore used . How can I fix this ? Thanks
It' not possible to undervolt with old blockchain driver! AB or miner can't do a sh*t to undervolt... and you can't use OverdriveNTool with old driver. Solution: 1) update windows and use newer driver like 20.11.1 2) use SMOS Thanks for answering . Tried the 20.11 driver and it mines with 9-10 mh so I switched back to the old driver which does 29-30 Smiley Any update from Phoenix on this errors ? Thanks in advance 20.11.1 and any other graphic driver are not in compute mode by default! (blockchain driver is) You must set every single GPU to compute mode using Radeon settings or all at once using little program like AMD-Compute-Switcher.exe |
|
|
|
Hey!
My first day with SMOS:
how can I undervolt memory?
Memory UV (MVDD): ?
Memory UV (MVDDCI): ?
Aggressive undervolt: ?
(RX 470 8GB eth only mining)
and what is Powerstage: 1-7?
I suggest entering our Discord. Help team will help you gest started pretty fast than writing here Depend on cardm go to Overclocking in that rig you want to OC and then click OC examples button at the top of this window. You will see suggested overclocking settings. MVDDCI and MVDD are for RX5000 series (not RX500 series) Ok, understood, those MVDDCI and MVDD fields are only for RX 5000 cards, thanks! But how can I UV RX 400/500 cards? Examples don't tell anything about memory UV... If I can't UV memory with SMOS, then I simply can't use Your software... ps: sorry, discord is no go for me - hate that app... |
|
|
|
SO , I`m using the last version of Phoenix miner (5.3b) and some blockchain drivers (17,4 - I think) for my AMD $X 470 . But I cannot undervolt my cards and they drain a lot of power from the wall . With almost 200w more than claymore used . How can I fix this ? Thanks
It' not possible to undervolt with old blockchain driver! AB or miner can't do a sh*t to undervolt... and you can't use OverdriveNTool with old driver. Solution: 1) update windows and use newer driver like 20.11.1 2) use SMOS |
|
|
|
|
Hey!
My first day with SMOS:
how can I undervolt memory?
Memory UV (MVDD): ?
Memory UV (MVDDCI): ?
Aggressive undervolt: ?
(RX 470 8GB eth only mining)
and what is Powerstage: 1-7?
|
|
|
|
|
Can I set cclock, mclock, cvddc, mvddc with this miner or do I need extra tool for that?
|
|
|
|
Just got spam mail from MNX to my mailbox... unbelievable, that this scam is still running  Greetings, it's MinexPay team.
We are preparing to send the first MinexPay cards.
Recently you've complete KYC checks. But the documents for address verification in your account are not valid.
For this reason we kindly ask you to send to us a high-res picture of one of the documents (updated) from the list for your address verification.
Documents list:
- Bank statement with the address and name
- Utility bills with the address and nameDocuments list:
- Payment for the phone with the address and name
- Payment for the Internet with the address and name
Simply answer to this letter and attach the required documents.
Best regards, MinexSystems |
|
|
|
|
Show Posts
