|
Thanks Mikeywith.
The Russian one you posted looks more robust. Have you personally used it or know people who have used in the past compared to the zeus makeshift one?
Price is definitely very high but if the Russian device does the job then I guess its completely worth it.
|
|
|
|
|
Hi Folks,
I am looking for advice on various repair kits and equipment needed to repair the hashboards. The T17 and S17 miners are not as reliable so looking specifically for those. I have looked into Zeus mining gear in the past and looks very makeshift.
Is there something better out there in terms of speed, quality, performance and support? Thanks in advance.
|
|
|
|
The header will probably be the same, eg --avalon10-<command>-<subset> <value> but beyond that, no idea. The previous generations all have slight differences in how values are formatted and permissible ranges.
Can't say I've tried futzing around with it but I'll ask Kano if he can get some information from his contacts at Canaan. I will say that you cannot hurt the miners. If a code(s) is wrong or out of range it will just be ignored. Push them too hard and again they largely self-protect themselves by throttling down to safer levels before again trying to push towards what you have set.
Were you able to OC or make the 1047 better in efficiency? |
|
|
|
|
Low power mode in the A1047 is now only doing 25 TH. Anyone noticed it? Has this issue been fixed?
|
|
|
|
|
I still have not figured how to OC it.
Did you notice that on the new firmware low power mode only gives you 25 TH or so?
|
|
|
|
|
Hey OP, any update on the 55 watt/TH software?
|
|
|
|
|
Do you think these will be the same as the old codes used in the old gen miners? Did you try any of that?
|
|
|
|
|
So from what you just mentioned their speed can be made low or high and they can be made more efficient?
My only issue with the A1047 is efficieny and their PSUs. Their PSUs go bad quite often no matter what temps you run them at.
Would love to play around with that. Let me know if you have any updates!!
In the latest firmware upgrade from April 29th, they have multiple pool configs and also a way to CGminer configuration and more options. However, I am not sure how to play with this feature. Have you done anything with this blank column of cgminer configuration-more options?
|
|
|
|
|
Hi Folks,
Is there a way to run the A1047 efficiently? Wondering if there are any improvement softwares like Braiins or Vnish for these?
|
|
|
|
When I changed to 443 it did work on pool.ckpool.org:443 on the hiveOS software. How do I connect the new generation miners on CKpool? I put some miners on HiveOS and then used below details but the pool shows dead on the miner. I know I am the one doing something wrong because other old gen machines are running fine on CK pool.
pool.ckpool.org:3333
BTC address
password: x
try pool.ckpool.org:443 pool.ckpool.org:4334 or depool.ckpool.org:3333 depool.ckpool.org:443 |
|
|
|
|
The pool shows as dead when I put in following details
solo.ckpool.org:3333
Bitcoin address
Password: x
I have tried 443 and 3333 both.
The software on the miner is HiveOS.
|
|
|
|
|
I wanted solopool. So I guess I posted in the wrong thread. Going over there now.
|
|
|
|
|
So what I have up there is not for Solopool? What is the URL for the solo pool?
|
|
|
|
|
How do I connect the new generation miners on CKpool? I put some miners on HiveOS and then used below details but the pool shows dead on the miner. I know I am the one doing something wrong because other old gen machines are running fine on CK pool.
pool.ckpool.org:3333
BTC address
password: x
|
|
|
|
|
Hi Folks,
Has anyone noticed issues with S17 Pro psu's. I have a bunch which have gone bad lately. Wondering if others are facing similar issues?
|
|
|
|
works great. Actually the best S17 firmware on the market.
I like the presets, detailed ASICs management and of course with all advantage of HiveOS.
What are some of the benefits of using the HiveOS? Not the firmware but the management software I mean. |
|
|
|
|
I meant more so like the S9's how people are overclocking to 17.7 TH and so on. Anyway to do that on this brand of miner?
|
|
|
|
|
Is there a way to overclock the Avalon miners?
|
|
|
|
|
How did the tax laws change again for miners?
|
|
|
|
What are some high efficiency settings for the s9 people are using? Hearing of 10th about 600W is possible.
This would be a game changer. Have you tried this? I did 10025gh and 815 - 825 watts
Not sure anyone can do 600 watts.
What frequency did you use? |
|
|
|
|
Show Posts
