 Show Posts
|
|
Pages: « 1 2 [3] 4 5 »
|
|
Does anyone know what to launch the wallet with so it automatically starts mining? In windows.
I have my mining rigs set to reboot every 6 hours and want to set the primecoin wallet to auto start.
like. "D:\Program Files (x86)\Primecoin\primecoin-qt.exe" -something?
Or can i make a bat to do it?
|
|
|
|
|
Does anyone know what to launch the wallet with so it automaticly starts mining? In windows.
I have my mining rigs set to reboot every 6 hours and want to set the primecoin wallet to auto start.
|
|
|
|
|
Ok 3 of mine are downloading the block chain finally. Only took 20 mins or so. lol
|
|
|
|
I've managed to intall everything without errors but it seems to be taking a lot of time on Primecoin server starting...
when I use the command primecoind getmininginfo it shows:
{
"blocks" : 0,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"primespersec" : 0,
"pooledtx" : 0,
"testnet" : false
}
even after 30 minutes of starting
I have the same problem Same problem here, I wonder if DigitalOcean blocked the ports that primecoind is using... Oh looks like mine just started working  So how long did u have to wait? |
|
|
|
I've managed to intall everything without errors but it seems to be taking a lot of time on Primecoin server starting...
when I use the command primecoind getmininginfo it shows:
{
"blocks" : 0,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"primespersec" : 0,
"pooledtx" : 0,
"testnet" : false
}
even after 30 minutes of starting
I have the same problem Same problem here, I wonder if DigitalOcean blocked the ports that primecoind is using... |
|
|
|
network hashrate at 2.75 Gh/s, everyone jumps in
Where you getting the hash rate from? go to the wallet click help click debug menu click console tab type "getnetworkhashps" without "" quotes. hit enter. Profit?? |
|
|
|
|
I think everyone went to the exchanges.
|
|
|
|
Really crazy to see how much Worldcoin is eating into the Litecoin Hashrate...Down to 16.3 GHs
Which is going to kill the coin unless value keeps going up to maintain its position as profit leader. What will happen is there will be an enormous amount of hash power on it that suddenly leaves when profitability falls below BTC. At that point, WorldCoin loses its instant transactions bullet point for weeks because the difficulty on it doesn't retarget fast enough. Too bad the devs didn't take this into consideration... They did, 8 hour difficulty re-target. If hash drops off drastically, say from 2gh/s to 200mh/s it will only take a day or 2 at most to retarget instead of 50 days for chinacoin. |
|
|
|
Go... |
|
|
|
|
Worldcoin didn't come to an exchange high like the other pump&dump coins did.
It came in really low and found a floor and is working its way up. Its a steady climb, I don't see it getting heavily dumped and then miners dropping off, its going to be quite profitable to mine for a good time to come.
Btw, if the pool your on is over 5-600Mh/s move your miners to another pool to spread out the hash rate.
|
|
|
|
|
Here is the explanation of the low price.
if it had launched on BTC-e the price would have started out high because a ton of people have BTC on there just waiting sitting on BTC looking for the next big investment.
on mcxNOW there theres is very little BTC compared to BTC-e. It also takes ~2 minutes for 10 worldcoin confirms on mcxNOW but BTC takes 30mins-1 hour.
so price is automaticly lmited, give it time, once more BTC gets to mcxNOW the price will automatically rise. Everyone is expecting atleast 0.01 and I don't plan on selling for any less, there are alot of people thinking the same.
|
|
|
|
1.8GH/sec!!!!!! I wont be surprised if we saw 2.5-3gh/sec by tomorrow.
o.0 This coin has leggs for sure. I bet within 3 hours of that new exchange opening bter or btc-e picks up worldcoin. |
|
|
|
|
The price is a bit high but I wouldnt doubt someone will buy it. lol
|
|
|
|
So how on earth do people go from the current market rate of WDC:
.027 LTC/BTC * .026 WDC / LTC (2.6 LTC per 100 WDC) = .000702 WDC / BTC. Comparable to CNC.
to .009? Are they on crack ? Never going to happen
Who would have thought CNC would get up to 0.004? Don't under estimate WDC. lol |
|
|
|
|
Have you looked into the cost for custom silver coins?
|
|
|
|
22:16:12  getnetworkhashps 22:16:12  1383167993  |
|
|
|
|
Ive spent all day watching this site, ive tripped my money. Its rly fun but sometimes time consuming. lol
|
|
|
|
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
i like it but add this node to... 5.135.115.138 its my server so i know its not going to go down XD Added. I think the problem is these nodes are hitting max connections and cant take on anymore. The popularity causes the nodes to be overloaded. lol |
|
|
|
|
15:22:59

getnetworkhashps
15:22:59

1348414541
growing every minute.
|
|
|
|
|
