 Show Posts
|
|
Pages: [1] 2 3 »
|
can i run dual mining ETH/ZIL with two different pool? example: ETH at nanopool.org and ZIL at ezil.me?
Checkout the example batch file "ETH+ZIL-shardpool.bat", which works for shardpool.io for ZIL & ethermine for ETH... but I found some zil mining pools force you to also send eth mining to their pool. Here's my windows batch file, username is your ethwallet address and you pass your ZIL wallet address to the ethermine as proxy, '-w crypto1' is your RIG or worker name if you track multiple mining rigs: "t-rex.exe -a ethash -o stratum+tcp://eu1-zil.shardpool.io:3333 -u 0x9eee2abb7b781638f9ef66c37a0023b45c1ad422 -p zil1ynzy3d6euan9yt0jced4kvha8ct6fq9z6kzl07@eu1.ethermine.org:4444 -w crypto1 --extra-dag-epoch 0" I have multiple RIGS doing this and can check ethermine.org website for eth mining details and shardpool.io for ZIL mining details. Thanks for the info. I already mine ZIL at ezil.me and ETH at nanopool.org with TeamRedMiner (AMD's rig) . I want to use T-Rex for my Nvidia's rig to run dual mining ETH/ZIL at the same pools. |
|
|
|
|
can i run dual mining ETH/ZIL with two different pool? example: ETH at nanopool.org and ZIL at ezil.me?
|
|
|
|
I have MSI Mech OC RX 5700 XT bios modded in Windows 10 version 20H2. My overclock settings are: Core clock 1200, Core voltage 750, Memory clock 1800.
I only get 51,5 mh/s with Phoenix Miner 5.5c. This hasrate is equal with stock bios.
When I'm using Team Red Miner 0.8.0, the hashrate is 55,2 mh/s.
Is that something wrong with my GPU?
try these 1300 1820 try those to start Wow... Thanks... Now the hashrate 55,8 mh/s.👍🙏 |
|
|
|
|
I have MSI Mech OC RX 5700 XT bios modded in Windows 10 version 20H2. My overclock settings are: Core clock 1200, Core voltage 750, Memory clock 1800.
I only get 51,5 mh/s with Phoenix Miner 5.5c. This hasrate is equal with stock bios.
When I'm using Team Red Miner 0.8.0, the hashrate is 55,2 mh/s.
Is that something wrong with my GPU?
|
|
|
|
I have two rx vega 56 installed on Windows 10 Pro build 2004 with adrenalin 24.0.1. I run the miner and show the opencl error. I already DDU with no good result. How to fix that?  |
|
|
|
Only new drivers support need to be updated. 19.4.3 is the last full supported at now by Phoenix miner.
Just updated to AMD driver version 19.5.2 (June 2019) 2766.5. Working again :-) You want to say that on 19.5.2 Phoenix woks with -clKernel 3? Yes. On a RX 580 8GB I'm using Nitro RX580 8GB, PhoenixMiner 4.2c, AMD Driver 19.3.3 with -clKernel 3, but it can not load DAG into VRAM with error clCreateBuffer -4. |
|
|
|
|
Could you describe the minimum VRAM for each algo in this miner?
|
|
|
|
|
i can not use finminer with miningpoolhub.com, why?
|
|
|
|
|
Can I use GTX 1060 3GB with the latest funakoshi miner?
|
|
|
|
|
Can I use nvidia-smi to overclock cpu clock, mem clock and fan speed? Because nvidia-settings need xorg to run firsta and it consumes small amount of VRAM.
|
|
|
|
I use phoenixminer 4.0b and right now I can't mine ETH with 3GB of VRAM (GTX 1060) on Windows 7 anymore. I'm going to switch to Ubuntu 16.04 immediately.
That will just give you 2 more months...why not immediately switch to something else? 2 months is enough to sell those gpus and replace it with a bigger vram.  |
|
|
|
|
I use phoenixminer 4.0b and right now I can't mine ETH with 3GB of VRAM (GTX 1060) on Windows 7 anymore. I'm going to switch to Ubuntu 16.04 immediately.
|
|
|
|
Hello guys! Does the miner support the latest drivers, because I have just installed them and tried to run the miner, but I get this message instead >>
2018.11.10:15:29:16.242: main Phoenix Miner 3.5d Windows/msvc - Release build
2018.11.10:15:29:16.242: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0xf045ea0aa168870d9322f04f776eccc1ba3621f2 -cclock 1140 -mclock 2200 -cvddc 900 -mvddc 920 -fanmin 40 -fanmax 80 -tt 45
2018.11.10:15:29:16.242: main No CUDA driver found
2018.11.10:15:29:16.242: main No OpenCL platforms found
2018.11.10:15:29:16.242: main No avaiable GPUs for mining. Please check your drivers and/or hardware.
2018.11.10:15:29:16.242: main Exit code: 8
RX580s with 18.11.1.
I can, though, mine without any hassle with the SRBMiner other algos..
I think phoenixminer 3.5d only work fine with adrenalin 18.2.1. Hey everyone! I just got an RX 590 and when I try to start PhoenixMiner it says no opencl found. I have driver version 18.11.2 installed also. It is in a PC with a 1080ti as the main GPU. Claymore runs fine with it so does WildRig Multi 13.1. Please help!
afaik... DDU all AMD and Nvidia drivers. Install adrenalin 18.2.1 first, and then install the latest version of catalyst. |
|
|
|
I always use custom fan curve setting in MSI Afterburner or Sapphire Trixx. I set the fan speed to 5 points above the GPU's temperature. For example, if the GPU's temp is 52C, then the fan will spin at speed of 57%, 65C temp 70% fan, and it always spin based on current GPU's temp. Can this custom fan curve setting be done via PhoenixMiner?
any reason for this, are you afraid of noise?  i'm afraid of heat  |
|
|
|
|
I always use custom fan curve setting in MSI Afterburner or Sapphire Trixx. I set the fan speed to 5 points above the GPU's temperature. For example, if the GPU's temp is 52C, then the fan will spin at speed of 57%, 65C temp 70% fan, and it always spin based on current GPU's temp. Can this custom fan curve setting be done via PhoenixMiner?
|
|
|
|
It seems -clkernel 1 option is not working for my rx570/580 4gb. The power consumption on-the-wall is still the same. I also didnt put -gt option in my config.txt
UPDATE:
Try -clkernel 2 and auto-tune gpu again.
And still the same hashrate and power consumption.
The option for lower power consumption is -clgreen 1 It is not clkernel -1 Sorry, my mistake. I get 2-4 watt power reduction with 2 gpu (rx570 and rx580) and no hashrate drop. |
|
|
|
|
It seems -clkernel 1 option is not working for my rx570/580 4gb. The power consumption on-the-wall is still the same. I also didnt put -gt option in my config.txt
UPDATE:
Try -clkernel 2 and auto-tune gpu again.
And still the same hashrate and power consumption.
|
|
|
|
-amd
-acm
-lidag 1
-gser 2
-tt 60
-tstop 80
-tstart 40
-fanmin 50
-fanmax 80
-powlim 10
-cclock 1050
-cvddc 900
-mclock 1950
-mvddc 900
Here is my Phoenix miner config my rig running XFX RX470 get error recreate DAG when epoch switching  How to fix this try: - eres 0 - lidag 3 |
|
|
|
|
