 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
I think that everything is completely in the hands of developers. And since the exchanger is centralized - you can not worry about the listings.
Do you think that it is for this purpose that centralized listings exist? Take money for the listings of tokens?)) I believe that if the exchange is popular, then the earned money from listing other tokens can easily be directed to the needs of the project. its all in fees from the exchange transactions |
|
|
|
|
I just installed xubuntu and after 5 hours of configuring it I can't get more than 550 kh/s from each of my 7970s which were yielding 650 kh/s on windows easily...
I would be happy to pay someone to teamviewer/ssh into my rig and config it, if it runs stable for 10 hours I will pay the amount we agreed on... PM me your price.
|
|
|
|
|
yes, private msg me your phone number or email and ill contact you... I dont come on here often...
|
|
|
|
|
I am looking to get rid of one of my cards, please serious offers of LTC or BTC only !
Card have been used in mining/gaming for 2 and a half months. (maybe working for about 80% of the time)
Will ship 1st to reputable members, if you can't trust me or need escrow you'll have to pay the escrow fees..
Will add pictures tomorrow or if someone shows interest.
|
|
|
|
Yea I'll check a linux tutorial and do it maybe later next week.... 12 hours a week is enough for me  |
|
|
|
Downloaded Catalyst 13.1, tried all the settings in the thread again it never goes above 700 ...  Did you also try Catalyst 13.4? (Or was it what you were having trouble with earlier?) Yesterday I tried catalyst 13.4 and today 13.1, seems strange because some guy told me he has the same cards :S... |
|
|
|
Downloaded Catalyst 13.1, tried all the settings in the thread again it never goes above 700 ... |
|
|
|
Just to confirm: Do you have --scrypt somewhere in your command? How long do you let it run before you read the speed?
What happens if you try this one:
-I 13 --thread-concurrency 8192 --gpu-engine 1080 --gpu-memclock 1500 --auto-fan -w 256 --shaders 2048 -g 2 --lookup-gap 2
Yes, I let it run for 30-60 secs then it appears to top... Thanks for your help, I think I caught the problem which is the drivers !! Will try the new drivers tomorrow since I need to sleep.. And again thanks for helping ! |
|
|
|
I am now running at Core 866 and Memory 1500, getting 610 kh/s per card... Since Memory at 1600 led the card to crash after 1 mins.
No I have 3 cards. And I don't have a cgminer.conf in the directory, I run a bat file.
-I 13 --thread-concurrency 8192 --gpu-engine 866 --gpu-memclock 1500 --auto-fan -w 256 --shaders 2048 -g 2 --lookup-gap 2
Try this: -I 13 --thread-concurrency 8192 --gpu-engine 1000 --gpu-memclock 1500 --auto-fan -w 256 --shaders 2048 -g 2 --lookup-gap 2 440 kh/s |
|
|
|
Leave shaders alone. And why do you run you mem so much higher than core? And up the -i untill the driver crashes and come back 1 level. The cards are playing chess with each-other at -i 13. Leave 13 on you card which is used for display and go up on the others. Your .bat should look like -i x,x,13 or 13,x,x depending which GPU u use for display. Spending 10 hours on the setting is not a lot. What happends if you run core=mem=1000?
I never use this pc, its made solely for mining also most people with 7970 at mining with much higher rates at -I 13.... The question is do you have/mined on a 7970?? because your post doesn't make any sense !! |
|
|
|
What happens if you lower the memory to 1500 and increase the core to 1000 or 1050?
Runs between 400-500 |
|
|
|
|
I am now running at Core 866 and Memory 1500, getting 610 kh/s per card... Since Memory at 1600 led the card to crash after 1 mins.
No I have 3 cards. And I don't have a cgminer.conf in the directory, I run a bat file.
-I 13 --thread-concurrency 8192 --gpu-engine 866 --gpu-memclock 1500 --auto-fan -w 256 --shaders 2048 -g 2 --lookup-gap 2
|
|
|
|
Even this setting isn't stable ! |
|
|
|
I tired every setting here my best was --thread-concurrency -w 256 -g 2 --lookup-gap 2 Core at 915 Memory at 1600, gets me 640 kh/s... How come you guys have the same card and same settings doesn't work  |
|
|
|
GPU: 1030
MEM: 1750
-I 13 --shaders 2048 -g 2 -w 256
Crashed !! at those settings |
|
|
|
Hello I have a rig with 3x 7970, Gigabyte GV-R7970C-3GD...
I have tried everything on the internet to get these cards working at 650+, actually they won't mine above 580 kh/s...
I have noticed a strange thing running settings that people over here post... I would usually get more kh/s if I remove the -g 2 !
Which people say is needed for speeds over 700 kh/s.. I have Catalyst 13.4, latest App SDK 2.8.
Quite annoying thing, I have spent more than 10 hours trying to set it up but no progress so far !
Currently running at 550 kh/s using stock settings at -I 13
Try engine at 1080 and memory at 1500. thread-concurrency at 8192 lookup-gap at 2 and (very important): gpu-threads at 2. if by gpu threads you mean -g 2 ! I have the cards running at these settings getting 400 kh/s |
|
|
|
|
hmm I got to 640 with :
--thread-concurrency 8192 -I 13 -w 256 --shaders 2048 --lookup-gap 2 -g2
Core running 915 and Memory @ 1600
|
|
|
|
What's your thread concurrency? How much ram does your system have, and how much usable do you have if you right click on my computer and click properties?
TC 8192, I have 8 Gb ram on win 7 64 bit |
|
|
|
|
