how should i update my rig AMD driver?
i see the driver is 17.5
but the latest driver is 18.3
The easy way is to download fresh Hive version and set up from scratch. there is no command like nvidia for AMD? i want to try this For AMD
tar -Jxvf amdgpu-pro-XXXX.tar.xz
cd amdgpu-pro-XXXX
./amdgpu-pro-install -y
dpkg -l amdgpu-pro
To install new amd driver you need to unisntall previous one, please run “amdgpu-pro-uninstall”.
Please unpack currently installed driver tar.gz to /var/opt/amdgpu-pro-local then “amdgpu-pro-uninstall” will work.
It was removed to save space.
Please follow this thread https://forum.hiveos.farm/t/drivers-update/3347 |
|
|
|
|
So you have to give more details about the bios Hynix is not enough.
It can be a 256mb or 512mb Bios and different memory (Some GPU have two memory type and some 3)
|
|
|
|
|
No need to trust when source code is available.
|
|
|
|
You guys going to keep feeding the troll or just let him die?
Yeahhhhhhh feed the troll  |
|
|
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on!  I liked Claymore because you got that remote manager which shows you all the GPU temps and hashrates. And with XMR-STAK it doesn't work. You need to either monitor on the pool or monitor by the HTTP interface. You also can't remotely execute a reboot.bat file. Yes XMR is more profitable but pretty soon people will discover this and switch over and the profitabililty will be the same between both based on the same power consumption. Just give it a few more weeks. I will say less than a week... XMR difficulty go down just after the Fork but it is increasing very fast. |
|
|
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! ETH reward (fork) gonna be in 2019. They tried on tesnet but without succes. |
|
|
|
I am experiencing update bug with last few HIVE versions. Few days after Telegram notification I am unable to update. The update button is highglighted but after depressing it shows "you have the latest version" and do nothing. It is a bit annoying just before today's Monero fork.
Please look into it.
Do you still have this problem? Try to connect to your rig using SSH and run command: selfupgrade I still have the problem. The rig wan't update to .79 even after .80 is announced I'll run selfupgrade and report results. The rig went offline. No connection for 5 minutes, going to perform hardware reboot. Base on my experience if you still have the problem after reboot, better to reinstall HiveOS, maybe corrupt upgrade... After hardware reboot 0.5-80 version is reported, rig working properly so far. The only drawback is that "selfupgrade succsessful" message was lost. Cool. Have a good mining  |
|
|
|
I am experiencing update bug with last few HIVE versions. Few days after Telegram notification I am unable to update. The update button is highglighted but after depressing it shows "you have the latest version" and do nothing. It is a bit annoying just before today's Monero fork.
Please look into it.
Do you still have this problem? Try to connect to your rig using SSH and run command: selfupgrade I still have the problem. The rig wan't update to .79 even after .80 is announced I'll run selfupgrade and report results. The rig went offline. No connection for 5 minutes, going to perform hardware reboot. Base on my experience if you still have the problem after reboot, better to reinstall HiveOS, maybe corrupt upgrade... |
|
|
|
I am experiencing update bug with last few HIVE versions. Few days after Telegram notification I am unable to update. The update button is highglighted but after depressing it shows "you have the latest version" and do nothing. It is a bit annoying just before today's Monero fork.
Please look into it.
Do you still have this problem? Try to connect to your rig using SSH and run command: selfupgrade |
|
|
|
|
Few update to support Cryptonight V8
0.5-79
* New command sreboot wakealarm will shutdown and then boot after 30 seconds boot again,
useful when you need to poweroff
* New command netconf wizard for network configuration, netconf-set CLI command to set network config for eth0 interface
* xmr-stak-fireice-uk-2.5.1
0.5-80
* xmrig 2.8.3
* Fixed xmr-stak stats which caused rig to go offline
|
|
|
|
I saw, that HiveOs was able to support mixed AMD and Nvidia setups.
I have a asrock H110 motherboard and I want to mix 5 1080 TI with 4 RX580 and 2 RX570.
What should I do?
Thank you in advance for your advice.
It will work nicely. Depending of what you want to mine, but you can configure 2 different miner if you want (1 AMD and 1 NVIDIA). You can also OC both Nvidia and AMD in the same OC profile. |
|
|
|
Tu as raison ,avec un bios moddé la consommation est un peut identique suivant la vram surtout .
Une samsung à 2000/890 consomme moins qu'une micron(non elpida) à 2100/910 ,pour un résultat presque identique ,la samsung aura aucune erreur sur le long , la micron possiblement quelque une , de ce j'ai constaté sous xmr .
Alors c'est pas propre à la mémoire mais au Timing utilisé dans le bios. Historiquement il y a eu beaucoup de recherche faites sur les RX 480 Samsung ce qui a amené des Timing super précis et permettant un OC beaucoup plus important. A oui pour info Micron et Elpida sont deux types de mémoires différentes même si Elpida a été racheté par Micron (ou l'inverse je sais plus). |
|
|
|
Merci pour ton retour. De ce que j'ai pu voir les Nitro ont l'air de vraiment performer avec une bonne réputation.
Et je viens de voir qu'il y a 75W de différence entre les cartes ce qui est non négligeable au niveau coût de l'électricité. Je pense que je vais rester sur mon 1er choix.
Attention de ne pas se fier aux consommations électriques théoriques ! Pour ma part, j'ai un rig avec 2 MSI Armor RX 570 4 Go ( mémoire Hynix, hélas) et une RX 570 Nitro+ 8 Go en Samsung. Une fois tout optimisé, Bios, tensions et fréquences, je n'ai presque pas d'écart de consommation entre les cartes, ce qui est normal vu qu'elles ont la même puce. Mais j'ai un écart de 2 MH/s (en minage ETH) en faveur de la Nitro+ qui, en plus, a un système de refroidissement bien plus performant que les MSI Armor et a un ventilo qui tourne presque deux fois moins vite pour la même température ! Comme je te l'ai écris sur un autre forum, prends plutôt une alimentation 80 PLUS Gold, tu gagnes 7 % de rendement soit pour une consommation à la prise de 500 W, un gain de 35 W soit environ 45 € par an de conso électrique ! Sans compter un moindre dégagement de chaleur et un ventilo d'alim moins sollicité donc moins bruyant. Rien de plus à dire. Sauf que les Hynix elles sont top !! Thierrysud faut vraiment que tu m'envois ton bios un de c 4 (impassenet) |
|
|
|
Do you have a specific guide on how to set OC?
It is much easier with Windows since you can watch memory errors in HWinfo, but you can watch for GPU errors and stability in Linux and change the memory OC depend on this. Mattthev Yes for best Mod Bios OC Windows is better but HiveOS is not bad at all. GPU error can be found in GUI so it is possible to modify OC to find the weak spot of the GPU and find the best OC settings. Wow nice. I didn't know that Hive OS have memory errors report. No Memory erros but error related to "reject share" + Claymore error when you OC a little bit to much. So it help but not like in Windows |
|
|
|
hi
i got problem in hive os Rx cards unknown , this could do lower hashrates..
00:02.0
Intel Corporation Device 5902 (rev 04)
01:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
03:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
04:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
05:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
06:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
07:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
Hello. I have the same issue. How this problem can it be resolve? I don't have hiveOS, but you shouldn't be using iGPU, it cause lot of troubles but mainly for Windows. IGPU should be turn off in Bios. Have you set GEN 2 in PCIE Bios settings? |
|
|
|
Do you have a specific guide on how to set OC?
It is much easier with Windows since you can watch memory errors in HWinfo, but you can watch for GPU errors and stability in Linux and change the memory OC depend on this. Mattthev Yes for best Mod Bios OC Windows is better but HiveOS is not bad at all. GPU error can be found in GUI so it is possible to modify OC to find the weak spot of the GPU and find the best OC settings. |
|
|
|
hi
i got problem in hive os Rx cards unknown , this could do lower hashrates..
00:02.0
Intel Corporation Device 5902 (rev 04)
01:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
03:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
04:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
05:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
06:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
07:00.0
Unknown GPU 1002-67ffref 4096M
Micron MT51J256M3, 115-C994PI0-102
Hello. I have the same issue. How this problem can it be resolve? Did you mod bios GPU? Can you send me your Bios to check them? Please contact me in PM i will check the bios. |
|
|
|
|
Show Posts
