 Show Posts
|
|
Pages: [1] 2 3 »
|
I have a 4 GPU setup with MSI AMD RX 470. They are all the same card. I am running windows 10 64 pro with a Pentium processor and 4gb Ram and a 120 solid state hard Drive. I have my virtual memory set at minimum to 6gb and max at 20gb. I am using NiceHash with the latest version of TeamRedMiner. I for some reason cannot run more than two gpus. If I try to start with a third gpu I get the cannot initialize idx error. Any thoughts what would cause this?
Thanks
I think the problem is virtual driver (paging) Right clock on my computer -->properties --> go to advance system setting --> Advance tab --> under performance part, click on setting --> Go to advanced --> change virtual memory amount to something like 20000 You can watch a youtube video to see how and how much virtual memory you need for those cards Good Luck i hope it works |
|
|
|
|
Hi there.
Im mining bittube (CNsaber algo) on my vega 64 rigs and my first GPU hashing less than others (about 1700 hash the rest are around 2100) and when i switch algo to for example CnR or CNconceal there is no problem and they are hashing the same amount.
Is there any problem with this miner on CnSaber algo ?
Im using 19.4.1 driver and clocks are the same + reg edit and weak Teamredminer timer on AMD tweaker.
And ofc Teamredminer 0.6.1 version.
Have a nice year and happy new year to all.
|
|
|
|
|
Hey all
I have a problem with my vega 64 rig. when mining one of my GPUs going down (its working but its lights are down and its not mining).
19.4.1 driver
7x Vega 64 XFX
Teamred miner v 0.4.5 ( its most stable one for me)
Registery edited ( it might be problem causer)
Win 10 64bit 1803
Using
WinAMDTweak.exe --gpu 0,1,2,3,4,5,6 --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
And i dont have overdriventools installed
Using Msi afterburn for tweaking ( core to 1175 clock / 925 volt) ( memory 1025 / 905 volt)
If someone have any idea what should i do to make it more stable please help
sometimes crashing in 1 day and sometime in 5 hrs and sometime in 3 days.
i could not find any video to show how skip using power play table and use same power with overdriven tools.
|
|
|
|
Hah. I'd rather have you release them than your good friend Ohgoda*****. After all, I'm sure she'd be all over them and dying to claim them as her work...
Well, i made the decision a long time ago to never ever release this for several reasons that are absolutely not important  But i don't mind annoying you guys with some screenshots   well done, but i have problem to running cli version, the error message was " C:\Users\3\Desktop\amdo>WinAMDTweak.exe --current
Failed to load EIO.dll"how to fix it, thanks you need to have the two dll's in the same directory as the amdtweak tool and that will resolve that. they are built in the download. I have done that Hi dude You can download EIO.dll from github of eliovp amdtweak (if you cant find it , go to lower versions, its under exe file in github release page.) Download it and put it at the same folder of your amdtweak.exe. Good luck |
|
|
|
@kerney666
What does it mean to have the "hw" code triggered for a GPU? My Radeon VII GPU is having almost a 40% "hw" triggering even though the pool is still accepting its share. However, the poolside hashrate for the card is very low. I am using TRM 0.5.2 and running my GPU @1575cclk/975mclk/855mV.
Any ideas what is happening and how to fix this?
Yo Bro try to play with your clocks and votag and see which one is best for your GPU. HW means hardware error and it shows that your GPU is not doing well. 40% HW error means you are losing 40% of your hashrate. try to increse your voltage and see if it can fix or not, and be careful to not break your GPU increase bit by bit. |
|
|
|
|
Hey guys im having a big problem with my xfx vega 64 / x7 rig.
When i start mining everything is fine but after a day or two days or more one of my gpus hashrate falling down and then makes the whole rig crash.
My settings are 1175/925 core 1050/905 memory driver 19.4.1 windows 10 (old TRM 0.4.5 is more stable for my rig)
Paging 80gb and i changed my clocks too much but nothing changed. My friend also has this problem.
Does someone know what should i do or how to troubleshoot this ?
|
|
|
|
Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)
Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu? I have the same issue with 2 of my rigs, and always happen with GPU 4. Tried lower the clocks and increase the voltage but same error occured. Cannot mine for 24 hours without error Yeah its happening to me too. Always one gpu making all rig crashed (rest of gpus working with all lights up but one of them working lights off and ofc,not mining) |
|
|
|
|
Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)
|
|
|
|
|
Cryptopia is just stealing the rest of our coins to cover its loss.
I cant believe that they done that with nz police helping them.
I think they hacked again and this is an excuse to shut down the exchange forever.
|
|
|
|
|
Hey guys i have a problem with my vega 64 x6 GPU rig.
After i started to mine on of my GPUs are crashing and then make whole rig crash.
Im using 19.4.1 driver and msi afterburner 1050 mem clock and MSI vega 64 with sumsong memory.
helia registery edited
any idea ?
|
|
|
|
Yo guys and girls whats up. I have a question about LOKI's mining profit. why is it too low ? i think it might cause some problems if this goes on. ( i mean 51% attack because of low gpu mining hashrate ) i think its because of recent fork but anyone knows whats going on or am i missing something ?  |
|
|
|
finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line
teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x
Move WorkerName to the password field. It should submit shares after that This Worked ! Thank you very much i removed my WorkerName form end of my wallet address and it worked. Really well done creating this miner its really working grate |
|
|
|
|
Hey folks
Do you have any recommendation for Vega 64 Drivers for this miner ?
should if stay on 18.6.1 ? or should change it to newer one ?
If yes please tell me whats is the best. tnx a lot dear community !
|
|
|
|
|
finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line
teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x
|
|
|
|
|
Hi Guys
Im mining Graft and Massary with this miner but its not accepting shares it only shows the hashrate and my GPU is working but no shares are accepted.
i dont have this problem with XMR i have this problem with Grafts algo and massary algo.
Anyone have same problem ?
|
|
|
|
dear developer of TTminer  Please add version of miner on miner file that we download. for example file name is not TTminer, you can change it to TTminer v1.27. this way we can keep the track of what we have now easier. Tnx for your awesome mining software. Good luck |
|
|
|
hi, is this still the best miner for RVN, or has it been eclipsed in the recent couple of months,
beginning of the year v 1.28 was arguably the strongest performer in the market for x16r Algo...
Trex 9.2 is little better my friend |
|
|
|
|
Guys is it working on Vega 64 to set compute mode ?
i registery edited my GPUs (to 1050 memclock & using 18.6.1 adrenalin driver) and i want to know if compute mode will help me to perform better on mining or not.
and one more problem i have on this miner is that pools and batfile are seperated and i dont know how to set my miner to mine with only one batfile without using other .txt files.
if you just make an example for vega 64 batfile ( that is not related to pool.txt) that will be really helpful.
|
|
|
|
|
Why there isnt any update from zenemy team after 1.28?
Updates came out very fast before, are they still working on the software ? Because competitors are taking the miners away to be honest.
|
|
|
|
|
