Latest posts of: adamjamal

Show Posts
Pages: [1] 2 »

Bitcoin / Mining support / s9se problem

on: July 11, 2021, 10:10:52 PM

Hello,

need help with this problem, it restart every 10 min

\

Code:


Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12632K (cceab000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 78/47, WL threshold: 4096, image sequence number: 1685683084
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 0F09FBE4-7088-4D73-A9E4-6DA82EA1158E, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1493/419, WL threshold: 4096, image sequence number: 452094481
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID D3DD27E6-7996-4F4C-A4B7-6093E99AED45, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb34000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2021-07-11 21:55:10.020] httpListenThread start ret=0
 [2021-07-11 21:55:40.021] start listen on 6060 ...
 [2021-07-11 22:00:18.571] setStartTimePoint total_tv_start_sys=416 total_tv_end_sys=417

2021-07-11 21:55:10 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version
2021-07-11 21:55:10 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled
2021-07-11 21:55:10 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode
2021-07-11 21:55:10 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29
2021-07-11 21:55:10 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX
2021-07-11 21:55:10 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE
2021-07-11 21:55:10 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7
2021-07-11 21:55:10 driver-btm-soc.c:851:check_chain: !! chain[0]is exist
2021-07-11 21:55:10 driver-btm-soc.c:851:check_chain: !! chain[1]is exist
2021-07-11 21:55:10 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fc ff
00000080 ff ff ff ff ff ff ff a0   5c 5c 5c 5c 5c 5c 5c 5c
00000090 5c 5c 5c 5c 5c 5c 5c 5c   5c 5c 5c 5c 5c 5c 5c 5c
000000a0 5c 5c 5c 5c 5c 5c 5c 5c   5c 5c 5c 5c 5c 5c 5c 5c
000000b0 5c 5c 5c 5c 5c 5c 5c 5c   5c 5c 5c 5c 5c 5c 5c 5c
000000c0 5c 5c 5c 5c 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 6a 16 00 00   20 ff ff ff 39 10 b5 9b
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fb 28 fd ff
00000080 ff ff ff ff ff ff ff a0   5b 5b 5b 5b 5b 5b 5b 5b
00000090 5b 5b 5b 5b 5b 5b 5b 5b   5b 5b 5b 5b 5b 5b 5b 5b
000000a0 5b 5b 5b 5b 5b 5b 5b 5b   5b 5b 5b 5b 5b 5b 5b 5b
000000b0 5b 5b 5b 5b 5b 5b 5b 5b   5b 5b 5b 5b 5b 5b 5b 5b
000000c0 5b 5b 5b 5b 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 2c 16 00 00   20 ff ff ff 39 10 53 61
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7e ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000010 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000020 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000030 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000070 ff ff ff ff ff ff ff ff   ff 01 02 1f fc 28 fc ff
00000080 ff ff ff ff ff ff ff a0   5b 58 5b 5b 5b 5b 5b 5b
00000090 5b 5b 58 5b 5b 5b 5b 5b   5b 5b 5b 5b 5b 5b 5b 5b
000000a0 5b 5b 5b 5b 5b 58 58 5b   5b 5b 5b 5b 5b 5b 5b 5b
000000b0 5b 5b 5b 5b 5b 5b 5b 5b   5b 58 58 5b 5b 5b 5b 5b
000000c0 5b 5b 5b 5b 00 ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 19 16 00 00   20 ff ff ff 39 10 82 70

read chain[0] hardware info:
major type: 0
minor type: 4
chip level: 0
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

read chain[1] hardware info:
major type: 0
minor type: 4
chip level: 0
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

read chain[2] hardware info:
major type: 0
minor type: 4
chip level: 0
bom version: 0x10
pcb version: 0x39
fixture 8pattern result: L0

sweep config for eco mode: 
sweep_start_voltage: 8.60
max_aging_voltage:   8.90
sweep_min_freq:      300M
sweep_max_freq:      380M

sweep config for hpf mode: 
sweep_start_voltage: 9.20
max_aging_voltage:   9.50
sweep_min_freq:      415M
sweep_max_freq:      465M
2021-07-11 21:55:21 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7
2021-07-11 21:55:21 driver-btm-soc.c:851:check_chain: !! chain[0]is exist
2021-07-11 21:55:21 driver-btm-soc.c:851:check_chain: !! chain[1]is exist
2021-07-11 21:55:21 driver-btm-soc.c:851:check_chain: !! chain[2]is exist
2021-07-11 21:55:21 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq: 
chain 0 freq:
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 

chain 1 freq:
455 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 455 

chain 2 freq:
455 440 455 455 455 455 455 455 455 455 
440 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 440 
440 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 440 
440 455 455 455 455 455 455 455 455 455 

2021-07-11 21:55:21 driver-btm-soc.c:6647:bitmain_soc_init: reset all...
2021-07-11 21:55:23 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 8000e40618c08854
2021-07-11 21:55:23 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D
2021-07-11 21:55:43 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177
2021-07-11 21:55:43 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177
2021-07-11 21:55:44 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
2021-07-11 21:55:44 power.c:185:power_init: power init ... 
2021-07-11 21:55:44 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[0] eeprom
2021-07-11 21:55:44 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.50
2021-07-11 21:55:44 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[1] eeprom
2021-07-11 21:55:44 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.50
2021-07-11 21:55:44 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[2] eeprom
2021-07-11 21:55:44 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.50
2021-07-11 21:55:44 driver-btm-soc.c:5754:update_highest_voltage: chain 0 hpf working voltage 9.20
2021-07-11 21:55:44 driver-btm-soc.c:5754:update_highest_voltage: chain 1 hpf working voltage 9.20
2021-07-11 21:55:44 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.20
2021-07-11 21:55:44 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 9.94
2021-07-11 21:55:44 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 09.94 ...
2021-07-11 21:55:45 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 
2021-07-11 21:55:45 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 09.94 ...
2021-07-11 21:55:47 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 
2021-07-11 21:55:47 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 09.94 ...
2021-07-11 21:55:48 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 
2021-07-11 21:55:48 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[0] hash rate = 5738
2021-07-11 21:55:48 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[1] hash rate = 5676
2021-07-11 21:55:48 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5657
2021-07-11 21:55:49 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 17071
2021-07-11 21:55:49 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 17000
2021-07-11 21:55:49 eeprom.c:669:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:460 IC[001]:460 IC[002]:460 IC[003]:460 IC[004]:460 IC[005]:460 IC[006]:460 IC[007]:460 IC[008]:460 IC[009]:460 
IC[010]:460 IC[011]:460 IC[012]:460 IC[013]:460 IC[014]:460 IC[015]:460 IC[016]:460 IC[017]:460 IC[018]:460 IC[019]:460 
IC[020]:460 IC[021]:460 IC[022]:460 IC[023]:460 IC[024]:460 IC[025]:460 IC[026]:460 IC[027]:460 IC[028]:460 IC[029]:460 
IC[030]:460 IC[031]:460 IC[032]:460 IC[033]:460 IC[034]:460 IC[035]:460 IC[036]:460 IC[037]:460 IC[038]:460 IC[039]:460 
IC[040]:460 IC[041]:460 IC[042]:460 IC[043]:460 IC[044]:460 IC[045]:460 IC[046]:460 IC[047]:460 IC[048]:460 IC[049]:460 
IC[050]:460 IC[051]:460 IC[052]:460 IC[053]:460 IC[054]:460 IC[055]:460 IC[056]:460 IC[057]:460 IC[058]:460 IC[059]:460 
voltage in mode2: 9.20 V
hash rate in mode2: 05738 GH/s

2021-07-11 21:55:49 eeprom.c:669:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:455 IC[001]:455 IC[002]:455 IC[003]:455 IC[004]:455 IC[005]:455 IC[006]:455 IC[007]:455 IC[008]:455 IC[009]:455 
IC[010]:455 IC[011]:455 IC[012]:455 IC[013]:455 IC[014]:455 IC[015]:455 IC[016]:455 IC[017]:455 IC[018]:455 IC[019]:455 
IC[020]:455 IC[021]:455 IC[022]:455 IC[023]:455 IC[024]:455 IC[025]:455 IC[026]:455 IC[027]:455 IC[028]:455 IC[029]:455 
IC[030]:455 IC[031]:455 IC[032]:455 IC[033]:455 IC[034]:455 IC[035]:455 IC[036]:455 IC[037]:455 IC[038]:455 IC[039]:455 
IC[040]:455 IC[041]:455 IC[042]:455 IC[043]:455 IC[044]:455 IC[045]:455 IC[046]:455 IC[047]:455 IC[048]:455 IC[049]:455 
IC[050]:455 IC[051]:455 IC[052]:455 IC[053]:455 IC[054]:455 IC[055]:455 IC[056]:455 IC[057]:455 IC[058]:455 IC[059]:455 
voltage in mode2: 9.20 V
hash rate in mode2: 05676 GH/s

2021-07-11 21:55:49 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7e
freq data per ASIC:
IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 
IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 
IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 
IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 
IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 
IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 
voltage: 11.10 V
hash rate: -0001 GH/s

freq data per ASIC in mode2:
IC[000]:455 IC[001]:440 IC[002]:455 IC[003]:455 IC[004]:455 IC[005]:455 IC[006]:455 IC[007]:455 IC[008]:455 IC[009]:455 
IC[010]:440 IC[011]:455 IC[012]:455 IC[013]:455 IC[014]:455 IC[015]:455 IC[016]:455 IC[017]:455 IC[018]:455 IC[019]:455 
IC[020]:455 IC[021]:455 IC[022]:455 IC[023]:455 IC[024]:455 IC[025]:455 IC[026]:455 IC[027]:455 IC[028]:455 IC[029]:440 
IC[030]:440 IC[031]:455 IC[032]:455 IC[033]:455 IC[034]:455 IC[035]:455 IC[036]:455 IC[037]:455 IC[038]:455 IC[039]:455 
IC[040]:455 IC[041]:455 IC[042]:455 IC[043]:455 IC[044]:455 IC[045]:455 IC[046]:455 IC[047]:455 IC[048]:455 IC[049]:440 
IC[050]:440 IC[051]:455 IC[052]:455 IC[053]:455 IC[054]:455 IC[055]:455 IC[056]:455 IC[057]:455 IC[058]:455 IC[059]:455 
voltage in mode2: 9.20 V
hash rate in mode2: 05657 GH/s

2021-07-11 21:55:49 driver-btm-soc.c:6698:bitmain_soc_init: fan_eft : 0  fan_pwm : 0
2021-07-11 21:55:49 driver-btm-soc.c:6388:bring_up_chain: 

bring up chain 0
2021-07-11 21:55:49 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-07-11 21:56:21 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:56:22 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 0, find asic num = 60
2021-07-11 21:56:26 driver-btm-soc.c:4816:set_freq_by_chain: chain[0] set freq:100.00
2021-07-11 21:56:26 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 0
2021-07-11 21:56:26 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06
2021-07-11 21:56:26 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0
2021-07-11 21:56:26 temperature.c:523:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-07-11 21:56:26 temperature.c:751:calibration_sensor_offset: chain[0] temp info is bad, reload from eeprom..
sensor type = 1,sensor num = 2
sensor pos: 31  40  0  0  0  0 
sensor offset: -4  -4  0  0  0  0 
2021-07-11 21:56:27 temperature.c:801:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55
2021-07-11 21:56:27 temperature.c:801:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55
2021-07-11 21:56:28 driver-btm-soc.c:6388:bring_up_chain: 

bring up chain 1
2021-07-11 21:56:28 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:57:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:02 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 1, find asic num = 50
2021-07-11 21:57:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:57:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:06 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 1, find asic num = 50
2021-07-11 21:57:06 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:57:07 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:08 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core
2021-07-11 21:57:08 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-07-11 21:57:08 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:57:09 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:10 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 1
2021-07-11 21:57:10 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 1
2021-07-11 21:57:12 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 1, find asic num = 50
2021-07-11 21:57:12 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2021-07-11 21:57:12 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-07-11 21:57:13 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:14 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 1
2021-07-11 21:57:14 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 1
2021-07-11 21:57:15 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 1, find asic num = 50
2021-07-11 21:57:16 driver-btm-soc.c:4033:check_asic_num: chian 1 check asic number failed! 
2021-07-11 21:57:16 driver-btm-soc.c:6388:bring_up_chain: 

bring up chain 2
2021-07-11 21:57:16 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-07-11 21:57:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-07-11 21:57:49 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 60
2021-07-11 21:57:53 driver-btm-soc.c:4816:set_freq_by_chain: chain[2] set freq:100.00
2021-07-11 21:57:54 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2
2021-07-11 21:57:54 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06
2021-07-11 21:57:54 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0
2021-07-11 21:57:54 temperature.c:523:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-07-11 21:57:54 temperature.c:751:calibration_sensor_offset: chain[2] temp info is bad, reload from eeprom..
sensor type = 1,sensor num = 2
sensor pos: 31  40  0  0  0  0 
sensor offset: -4  -4  0  0  0  0 
2021-07-11 21:57:54 temperature.c:801:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55
2021-07-11 21:57:55 temperature.c:801:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-4, typeID=55
2021-07-11 21:57:55 asic.c:1153:set_baud: set baud=1
2021-07-11 21:57:55 asic.c:1269:set_asic_ticket_mask: set ticket mask 63
2021-07-11 21:57:56 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [28]
2021-07-11 21:57:56 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ...
2021-07-11 21:58:06 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [28]
2021-07-11 21:58:06 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ...
2021-07-11 21:58:17 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [28]
2021-07-11 21:58:17 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ...
2021-07-11 21:58:27 driver-btm-soc.c:4160:open_core_bm1393: Start Open Core!!
2021-07-11 21:58:31 driver-btm-soc.c:4227:open_core_bm1393: End Open Core!!
2021-07-11 21:58:32 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125
2021-07-11 21:58:34 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150
2021-07-11 21:58:36 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175
2021-07-11 21:58:37 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200
2021-07-11 21:58:39 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225
2021-07-11 21:58:41 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250
2021-07-11 21:58:43 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275
2021-07-11 21:58:44 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300
2021-07-11 21:58:46 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325
2021-07-11 21:58:48 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350
2021-07-11 21:58:50 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375
2021-07-11 21:58:51 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 400
2021-07-11 21:58:53 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 425
2021-07-11 21:58:55 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 450
2021-07-11 21:58:57 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 460
2021-07-11 21:58:58 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 460 ,min = 460
2021-07-11 21:58:58 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ...
2021-07-11 21:58:58 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting:
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
460 460 460 460 460 460 460 460 460 460 
2021-07-11 21:58:58 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage:
now setting chain[0]-volt[09.89]-data[017] 
now setting chain[0]-volt[09.80]-data[019] 
2021-07-11 21:59:05 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try!
now setting chain[0]-volt[09.72]-data[021] 
now setting chain[0]-volt[09.65]-data[023] 
now setting chain[0]-volt[09.58]-data[025] 
now setting chain[0]-volt[09.54]-data[026] 
now setting chain[0]-volt[09.51]-data[027] 
2021-07-11 21:59:23 power.c:1331:slowly_set_working_power_t11: done!
2021-07-11 21:59:23 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125
2021-07-11 21:59:25 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150
2021-07-11 21:59:27 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175
2021-07-11 21:59:29 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200
2021-07-11 21:59:30 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225
2021-07-11 21:59:32 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250
2021-07-11 21:59:34 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275
2021-07-11 21:59:36 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300
2021-07-11 21:59:37 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325
2021-07-11 21:59:39 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350
2021-07-11 21:59:41 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375
2021-07-11 21:59:43 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 400
2021-07-11 21:59:44 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 425
2021-07-11 21:59:46 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 440
2021-07-11 21:59:48 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 455 ,min = 440
2021-07-11 21:59:48 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ...
2021-07-11 21:59:51 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting:
455 440 455 455 455 455 455 455 455 455 
440 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 440 
440 455 455 455 455 455 455 455 455 455 
455 455 455 455 455 455 455 455 455 440 
440 455 455 455 455 455 455 455 455 455 
2021-07-11 21:59:51 power.c:1309:slowly_set_working_power_t11: set chain 2 to working voltage:
now setting chain[2]-volt[09.89]-data[017] 
now setting chain[2]-volt[09.80]-data[019] 
now setting chain[2]-volt[09.72]-data[021] 
now setting 2021-07-11 22:00:05 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try!
chain[2]-volt[09.65]-data[023] 
now setting chain[2]-volt[09.58]-data[025] 
now setting chain[2]-volt[09.54]-data[026] 
now setting 2021-07-11 22:00:16 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try!
chain[2]-volt[09.51]-data[027] 
2021-07-11 22:00:18 power.c:1331:slowly_set_working_power_t11: done!
2021-07-11 22:00:18 driver-btm-soc.c:5112:set_timeout: freq 460 final timeout=284
2021-07-11 22:00:18 driver-btm-soc.c:2920:low_temp_process_parm_init: chip miner_type = [4]
2021-07-11 22:00:18 driver-btm-soc.c:2920:low_temp_process_parm_init: chip miner_type = [4]
2021-07-11 22:00:18 driver-btm-soc.c:3359:check_system_work: check system thread start...
2021-07-11 22:00:18 driver-btm-soc.c:3376:check_system_work: low_bringup_pcb_temp_threshhold = 28
2021-07-11 22:00:18 driver-btm-soc.c:3377:check_system_work: recovery_working_vol_low_temp = 30, recovery_working_vol_high_temp = 35
2021-07-11 22:00:18 driver-btm-soc.c:3378:check_system_work: delta_voltage = 0.10
2021-07-11 22:00:18 driver-btm-soc.c:6810:bitmain_soc_init: Init done!
2021-07-11 22:00:18 driver-btm-soc.c:7429:bitmain_soc_prepare: bitmain soc init success.
2021-07-11 22:00:18 temperature.c:1525:read_temp_func: bring_up_pcb_temp = 32
2021-07-11 22:00:33 temperature.c:1870:get_target_chip_temp: if startup in low temp environment: NO
2021-07-11 22:00:33 temperature.c:1716:_get_target_chip_temp_t11: chip miner_type = [4]
2021-07-11 22:00:33 temperature.c:1716:_get_target_chip_temp_t11: chip miner_type = [4]
2021-07-11 22:00:37 driver-btm-soc.c:3541:check_system_work: set reopen algorith parameters...
2021-07-11 22:00:59 util.c:2178:process_version_mask: Pool 0 Version num is 2
2021-07-11 22:00:59 util.c:2178:process_version_mask: Pool 0 Version num is 2
2021-07-11 22:00:59 driver-btm-soc.c:7104:send_job: Version num 2
2021-07-11 22:05:21 eeprom.c:917:eeprom_get_inbalance_info: error: chain[0] inbalance num is 255, more than MAX_OFFSET 4
2021-07-11 22:05:21 driver-btm-soc.c:2500:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0
2021-07-11 22:05:21 eeprom.c:917:eeprom_get_inbalance_info: error: chain[2] inbalance num is 255, more than MAX_OFFSET 4
2021-07-11 22:05:21 driver-btm-soc.c:2500:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0
2021-07-11 22:05:21 driver-btm-soc.c:2513:is_domain_imbalance: dumping inbalance domain info...
0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 0

Economy / Exchanges / Paxful is a scam ?

on: October 04, 2020, 12:09:05 PM

Hello everyone , I had a very bad experience with paxful company, the problem began when I entered my phone number in their website, before this happens I was trading on their platform without any trouble, but one time after i deposited BTC and before starting a trade they told me to add my phone number to proceed and when i entered my phone number they immediately frozen my account i didn't know why !, so i contacted with their support which is one of the worst support i had seen in my life they took 2 week to reply and the response was I'm from forbidden country in their system and i can no longer user their service, at this point i don't want to use their service anyway so i told them i want my BTC back, this time they took almost one month to reply saying i can't do that ! and i must verify my account in order to withdraw, I mean what the hell is wrong with them this is my money why can't i just withdraw it ? now my money still stack in there and i don't know how to deal with them i don't want to trade their anymore i just want my money back ! any idea to help with this, i tried to verify my passport and they accept it but still the address verification is a problem because they don't accept my country, anyway to bypass that and verify the address so i can unfreeze my account ?

Bitcoin / Mining software (miners) / Re: Braiins OS: open-source mining firmware [S9, T1]. New release includes AsicBoost

on: April 14, 2020, 02:43:03 PM

Does this firmware work on S9k or S9E ?

Bitcoin / Mining software (miners) / Re: Antminer S9 Volt Rocket Ship firmware mod! Most Efficient Firmware Just Updated!

on: April 14, 2020, 02:28:02 PM

Does this firmware work on S9k and S9E ?

Bitcoin / Mining speculation / Re: Bitmain Points ( A new feature, What is it) ?

on: February 14, 2020, 08:57:55 AM

I have 18 points, as for the new miners will be 5nm what is the main difference between them and the current miners

Economy / Service Discussion / coronavirus affected bitmain ?

on: February 06, 2020, 06:51:51 PM

Hello I bought couple of miners on 31 of Jan and they still didn't ship out so I contacted bitmain and they said "due to the influence the coronavirus, we will handle the refund after 2.10, please wait patiently, thanks." so did they stopped shipping or what ? does anyone else have their miners shipped this week?

Local / العربية (Arabic) / Re: تحويل الاموال الي بتكوين او العكس

on: January 31, 2020, 12:12:00 PM

Quote from: SyGambler on January 30, 2020, 10:58:21 PM Quote from: adamjamal on January 30, 2020, 06:44:11 PM مثلا عندما تريد ان تبيع البتكوين يطلب منك الموقع اولا ان تقوم بتحويله الي محظفه خاصه بالموقع ويظهر رصيدك في الموقع لنقل 200$ وعندما تقوم باختيار احد الباعه لنفرض انك ترغب بتحويل ال200$ بتكوين الي بايونيير وعند اختيارك لاحد الباعه قمت باختيار بائع من دون اي تقييم ولنفرض انه محتال في هذه الحاله بعد ان تقوم باعطائه ايميلك ليحول لك المال ، يظهر لك في نفس الوقت زر الافراج عن البتكوين حيث يتم وضع البتكوين في محفظه خاصه بالموقع الطرف الثالث ولن يستطيع المحتال ان يستقبل البتكوين الا بعد افراجك انت علي البتكوين اي مثلا يقوم باخبارك انه قام بتحويل الاموال اليك ولكن لم تصلك الاموال فلا يجب عليك ان تقوم باعطائه البتكوين وفي هذه الحاله تدخل فائدة الموقع حيث انه يمكنك ان تقوم بالغاء الطلب وسيتم ارجاع البتكوين اليك من المحفظه الخاصه بالموقع وللحذر قم دائما باختيار بائع ذو تقيمات عاليه . عذراً أخي ولكن أنا بشكل عام لا أملك بايبال وبالتالي ليست عندي معلومات كافية عنه , ولكن حسب العديد من التعليقات في الأقسام الأجنبية الجميع يأكدون أنه من الخطر أن تتعامل مع شخص غير معروف بالبايبال حيث بإمكان المرسل أن يقوم بعمل إلغاء للإرسال ممكن تقلي الإسكرو في هذه الحالة ما دوره ؟ يعني اذا بالفعل تلقيت أنت البايبال وقام الموقع بإعطاء البتكوين للشخص الآخر فما الذي يمنع الشخص من أن يسترد أمواله ؟ هل توجد خاصية معينة في هذه المواقع لهذا الأمر ؟ صحيح كلامك انه التعاملات بالباي بال بصفه عامه خطر ليس في الكربتو فقط بل كل المعاملات الالكترونيه حيث انه البايبال لديه نظام صارم فيما يتعلق بالدفع مقابل المنتجات الالكترونيه فلذلك انصحك باستخدامه في حالة الشراء فقط اي لديك بعض المال في الباي بال وتريد تحويله الي بتكوين حيث انه بعد استقبالك للبتكوين كما هو معروف من المستحيل ان يتم عكس العمليه وارجاع البتكوين مثل مايحدث في الباي بال ، اما ان كنت مظطر لتحويل البتكوين الي البايبال الخاص بك فيجب عليك ان تقوم فورا بسحب الاموال بعد استقبالها سواء الي بنك محلي او بايونير او قم بالشراء بها مباشره المهم ان لاتبقي الاموال في حسابك لهذا الافضل استعماله في الشراء البتكوين فقط وليس العكس لتجنب هذه المشاكل .

Local / العربية (Arabic) / Re: تحويل الاموال الي بتكوين او العكس

on: January 30, 2020, 06:44:11 PM

Quote from: icy3 on January 30, 2020, 06:01:51 PM شكرا على الموضوع. بناء على خبرتك باستخدام المواقع, ما هي أساليب الأحتيال التي قد تمارس على هذه المواقع؟ حيث حضرتك تقول ان المواقع عبارة عن Escrow, لكن على الشخص أن ينتبه لعمليات الاحتيال لذلك أردت أن أعرف أكثر عن الآليات المستخدمة للاحتيال لتجنبها. مثلا عندما تريد ان تبيع البتكوين يطلب منك الموقع اولا ان تقوم بتحويله الي محظفه خاصه بالموقع ويظهر رصيدك في الموقع لنقل 200$ وعندما تقوم باختيار احد الباعه لنفرض انك ترغب بتحويل ال200$ بتكوين الي بايونيير وعند اختيارك لاحد الباعه قمت باختيار بائع من دون اي تقييم ولنفرض انه محتال في هذه الحاله بعد ان تقوم باعطائه ايميلك ليحول لك المال ، يظهر لك في نفس الوقت زر الافراج عن البتكوين حيث يتم وضع البتكوين في محفظه خاصه بالموقع الطرف الثالث ولن يستطيع المحتال ان يستقبل البتكوين الا بعد افراجك انت علي البتكوين اي مثلا يقوم باخبارك انه قام بتحويل الاموال اليك ولكن لم تصلك الاموال فلا يجب عليك ان تقوم باعطائه البتكوين وفي هذه الحاله تدخل فائدة الموقع حيث انه يمكنك ان تقوم بالغاء الطلب وسيتم ارجاع البتكوين اليك من المحفظه الخاصه بالموقع وللحذر قم دائما باختيار بائع ذو تقيمات عاليه .

Local / العربية (Arabic) / تحويل الاموال الي بتكوين او العكس

on: January 30, 2020, 05:47:51 PM

السلام عليكم ورحمة الله من فترة واجهتني بعض المشاكل في تحويل الاموال الي بتكوين او العكس لهذا اردت ان اشارككم تجربتي لعل احد يستفيد منها أولا ان كان لديك بعض المال في احد البنوك الالكترونيه مثل الباي بال , بايونير , بيرفكت موني وغيرها وتريد تحويل المال منها الي البتكوين فانصحك بموقعين قمت بتجربتهم العديد من المرات بدون اي مشاكل مع الحفاظ علي حقك وحق البائع لانه هذه المواقع تستخدم نظام Escrow وهو بكل بساطه يدخل الموقع كاطرف ثالث بينك انت(المشتري) والبائع حيث يقوم الموقع بحماية جميع الاطراف من اي عملية نصب بالنسبة للمواقع التي تعاملت معاها https://localbitcoins.com/ https://paxful.com/ حيث تقوم بالتسجيل في الموقع بكل بساطه بعدها تقوم بالاختيار هل ترغب ببيع او شراء البتكوين ان كنت ترغب بالشراء قم بالظغط علي شراء سريع ثم اختار طريقة الدفع التي ترغب بها فيظهر لك العديد من البائعين قم باختيار بائع ذو تقيمات عاليه لتجنب المحتالين مثلا تريد الشراء عن طريق الباي بال يقوم البائع باعطائك الايميل الخاص به لتقوم بتحويل الاموال اليه ثم تنتظر حتي يقوم البائع بالافراج عن البتكوين عموما هذا باختصار شديد تجربتي في الشراء او البيع علي هذه المواقع مضمونه ، لو يوجد احد يرغب في مزيد من التفاصيل او لم يفهم طريقة الشراء او البيع ساقوم بتعديل الموضوع وتوضيح بالصور مستقبلا .

Local / التعدين / Re: مشكلة التحديث الاخير T17 nicehash

on: January 30, 2020, 05:27:40 PM

Quote from: mikeywith on January 25, 2020, 11:23:15 PM اعتقد انه تم الاجابة عن سؤالك في الموضوع الذي وضعته في القسم الانجليزي للتعدين https://bitcointalk.org/index.php?topic=5217486.0. اعتقد ايضا انك تجاهلت النصائح بخصوص الابتعاد عن النايس هاش لاجهزة ASIC بالمجمل, لا ادري ربما لانك لاتتق في كلامي وكلام الاعضاء الاخرين , ام انك لم تفهم مانعنيه ؟ على العموم وبغض النظر عن السبب ساستغل الفرصة لاعطيك هده النصيحة مرة اخرى والاهم هوا ابقاء المعلومة متاحة للاعضاء العرب. استعمال اجهزة التعدين على Nicehash يظر بجهاز التعدين خاصتك, لا تنخدع بالدخل التي يظهر لك في مواقع حساب ارباح اجهزة التعدين, وبالاخص موقع نايس هاش, لان الدخل بالمجمل متقارب جدا ولايستحق المخاطرة بجهاز تكلفته 1000$ تقريبا في امل ان تكسب بضع سنتات. https://whattomine.com/asic الصورة بالاسفل هي "تقدير" لدخل جهاز تعدين T17 th40 الفرق في الدخل بين التعدين المباشر و التعدين على نايس هاش = 0.4$ يوميا, وهدا مبني على متسوط 3 ايام, وطبعا لايشمل العمولات, بالملخص الفرق لايستحق العناء وعند استخدام متوسط لفترة اكبر مثل شهر, ستجد ان الفرق تقريبا صفر. شكرا لك نعم تم حل المشكله وهي بتبديل stratum بالنسبة للتعدين علي النايس فـاقدر نصيحتك ولكني قمت بتجربة مزرعتين في نفس الوقت ولاحظت اختلاف يمكن القول انه معقول الي حد ما وهو يحدث فقط عندما يكون السعر متقلب جدا في السوق يصبح الربح افضل ، اما بالنسبه للضرر فيوجد طرفين هناك من سئلته يقول يضر والاخر لا عموما من راي الشخصي انه يوجد خطر ولكن بسيط علي الاجهزة مقارنه بالدخل فهو يستحق المخاطره في بعض الاحيان .

Local / العربية (Arabic) / Re: رسالة إلى الأعضاء الجدد في المنتدى

on: January 30, 2020, 05:07:47 PM

صراحة مع احترامي لك وللجميع انا ارى انه منتدي فقط للاستفاده لهذا لايهمني ابدا عدد التعليقات , وكل المعلومات التي استفدت منها في هدا الموقع كانت من الاخوه الاجانب حيث ان العرب لايقومون باعطاء المعلومات للاسف الشديد اتمني ان يتغير هذا الواقع ، بالتوفيق .

Bitcoin / Mining support / Re: nicehash not working with T17 antminer

on: January 21, 2020, 09:06:31 PM

Quote from: supersonic on January 19, 2020, 09:13:12 PM just use stratum+tcp://sha256asicboost.EU.nicehash.com:3368 had same issue on my S17's problem solved for me Thank you only if you told me this earlier , nicehash also give me this solution and it worked, after almost a week from talking about this problem .

Bitcoin / Mining support / Re: nicehash not working with T17 antminer

on: January 16, 2020, 10:46:02 PM

Quote from: rocky2020 on January 16, 2020, 08:05:43 PM i have latest T17 firmware and it work fine nicehash. i tried overclock firmware, and in that case nicehash didn't reconized it you have to do it by SD, bec it overide the downgrade protection. you tried this version (Antminer-T17-user-OM-201912241613-sig_5047.tar.gz) with nicehash and it works ? if that's the case can you please send me your kernel log file and how did you put the pools in the miner configurations same port for all the 3 or how, i will try exactly like you maybe it will work

Bitcoin / Mining support / Re: nicehash not working with T17 antminer

on: January 16, 2020, 07:14:09 PM

Quote from: rocky2020 on January 16, 2020, 01:52:20 AM if you use a non signed firmware ( like AsicTuner overclock ), it wont work on NiceHash ( maybe not compatible with their "Asicboost" ? ). But if you use original firmware, even the latest, it works perfectly. To downgare, just recover 1st firmware ( not on their website, they removed it ), put on SD and flash it through the Sd reader. do you have T17 miner with the latest update and nicehash do work for you ? Quote from: BitMaxz on January 15, 2020, 11:58:39 PM Are you sure about the firmware if it's a signed firmware? if it's unsigned firmware it won't work but if you flash it with sig firmware it should be work. Anyway, if your miner has an SD card slot you can try to contact bitmain and ask for an SD card image. I'm sure their image is a lower version. You can follow this guide from here SD card flashing with customized PW yeah i downloaded it from there website before the last one (i keep all the upgrade files on my pc), strange why i can't downgrade ! i will try the SD thing hope it will work, thank you .

Bitcoin / Mining speculation / Re: A tip on buying cheaper mining ASICs from Bitmain (January 2020)

on: January 16, 2020, 11:31:01 AM

i see , thanks for the clarification so there is no way i can get more than 10% off ,anyway i also have a balance in my account but when i checkout i can't see it unlike the coupons how can i use it .

Bitcoin / Mining speculation / Re: A tip on buying cheaper mining ASICs from Bitmain (January 2020)

on: January 16, 2020, 10:26:37 AM

okay, say i would like to buy 5 s9 miners with power supply, does this mean i can use 5 (order coupon) ? in other words can i get more than 10% off from the total order

Bitcoin / Mining support / Re: nicehash not working with T17 antminer

on: January 15, 2020, 10:02:22 PM

Quote from: BitMaxz on January 14, 2020, 11:14:35 PM You can downgrade it with signed firmware but it looks like Bitmain always remove older version from their download page. Maybe some user here who use the same miner has a backup or older firmware version but I don't recommend to download them from unknown source unless if they have a bitmain direct link of older version. if you mean using the upgrade process and choose the old firmware i already tried that and got this error (RUNME:cannot downgrade!!!) system upgrade failed , is there a way to bypass that

Bitcoin / Mining speculation / Re: A tip on buying cheaper mining ASICs from Bitmain (January 2020)

on: January 15, 2020, 07:34:30 PM

is it possible to use more than one coupon for the same order ? also there is another type of coupon that has no expiring date can i use it with the temporary one(ends on 31 Jan)

Bitcoin / Mining support / Re: nicehash not working with T17 antminer

on: January 14, 2020, 09:22:04 PM

Quote from: Philipma1957cellphone on January 14, 2020, 08:26:02 PM Yeah the new firmware prevents nicehash due to.the constant switching nicehash causes. I would not use nicehash with t17 t17e t17+ gear. Or any type of.s17 gear. so there is no way to use nice hash now ? is there a way to go back to my old firmware Quote from: BitMaxz on January 14, 2020, 08:08:26 PM I don't recommend to use nicehash pool because it will give you little reward compared to other pools. If you are having issue on Nicehash better use other mining pool for BTC. Check other SHA256 pools from this link https://miningpoolstats.stream/bitcoin or Try viaBTC pool it is better than Nicehash. well it's the best from my perspective and i did try to compare it and found it gives me the highest reward i don't know how and why, thanks for the advice .

Local / التعدين / مشكلة التحديث الاخير T17 nicehash

on: January 14, 2020, 12:19:41 PM

السلام عليكم لدي مشكلة في جهاز T17 بعد اخر تحديث لم يعد يعمل علي نايس هاش ولم استطع العوده للتحديث السابق ايضا قمت بتجربة حوض تعدين اخر واشتغل معي اي ان المشكلة مع النايس هاش فقط حيث يظهر لي ان الهاش صفر في الجهاز هذه النسخة القديمه والتي تعمل مع النايس هاش: Antminer-T17-user-OM-201912051119-sig_4803.tar النسخة الجديده لاتعمل مع النايس هاش : Antminer-T17-user-OM-201912241613-sig_5047.tar ملف اللوج علي التحديث الاخير والذي فيه مشكله : Quote Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=124096 pcpu-alloc: 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203756K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25620K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12580K (cceb8000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 12/6, WL threshold: 4096, image sequence number: 72543235 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D94047F6-1175-4366-977B-837CC879EE19, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 39/20, WL threshold: 4096, image sequence number: 3389548455 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 721E72E7-F382-4130-AD9F-6C10D9102537, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 2020-01-14 08:30:36 driver-btm-api.c:631:init_freq_mode: This is scan-user version 2020-01-14 08:30:36 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1 2020-01-14 08:30:36 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1 2020-01-14 08:30:36 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-01-14 08:30:36 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17 2020-01-14 08:30:36 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49 2020-01-14 08:30:36 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn 2020-01-14 08:30:36 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX 2020-01-14 08:30:36 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-01-14 08:30:36 thread.c:789:create_read_nonce_reg_thread: create thread 2020-01-14 08:30:42 driver-btm-api.c:1067:init_miner_version: miner ID : 804824025c20885c 2020-01-14 08:30:42 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013 2020-01-14 08:30:43 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-14 08:30:45 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-14 08:30:47 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-14 08:30:47 driver-btm-api.c:705:get_product_id: product_id[0] = 1 2020-01-14 08:30:47 driver-btm-api.c:705:get_product_id: product_id[1] = 1 2020-01-14 08:30:47 driver-btm-api.c:705:get_product_id: product_id[2] = 1 2020-01-14 08:30:47 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1 2020-01-14 08:30:47 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1 2020-01-14 08:30:47 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1 2020-01-14 08:30:47 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1 2020-01-14 08:30:47 driver-btm-api.c:644:_set_project_type: project:2 2020-01-14 08:30:47 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17 2020-01-14 08:30:47 driver-btm-api.c:685:dump_pcb_bom_version: Chain PCB Version: 0x0100 2020-01-14 08:30:47 driver-btm-api.c:686:dump_pcb_bom_version: Chain BOM Version: 0x0100 2020-01-14 08:30:47 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-01-14 08:30:47 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-01-14 08:30:47 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-01-14 08:30:47 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-01-14 08:30:48 driver-btm-api.c:1897:bitmain_board_init: Fan check passed. 2020-01-14 08:30:50 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-14 08:30:53 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 2020-01-14 08:30:55 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-14 08:30:58 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2020-01-14 08:31:00 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-14 08:31:04 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2020-01-14 08:31:04 thread.c:784:create_pic_heart_beat_thread: create thread 2020-01-14 08:31:04 power_api.c:55:power_init: power init ... 2020-01-14 08:31:04 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-01-14 08:31:36 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ... 2020-01-14 08:31:41 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-14 08:31:43 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.273115 2020-01-14 08:31:45 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.346592 2020-01-14 08:31:47 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.297607 2020-01-14 08:31:47 power_api.c:97:get_average_voltage: aveage voltage is: 17.305771 2020-01-14 08:31:47 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 2020-01-14 08:31:47 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-01-14 08:31:47 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-01-14 08:31:47 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-01-14 08:31:47 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2020-01-14 08:31:58 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0 2020-01-14 08:32:08 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2020-01-14 08:32:18 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2020-01-14 08:32:22 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2020-01-14 08:32:22 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2020-01-14 08:32:22 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2020-01-14 08:32:22 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4 2020-01-14 08:32:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0 2020-01-14 08:32:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0 2020-01-14 08:32:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0 2020-01-14 08:32:22 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2020-01-14 08:32:22 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6 2020-01-14 08:32:23 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-01-14 08:32:23 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-01-14 08:32:23 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-01-14 08:32:23 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2020-01-14 08:32:23 voltage[0] = 1690 2020-01-14 08:32:23 voltage[1] = 1690 2020-01-14 08:32:23 voltage[2] = 1690 2020-01-14 08:32:23 power_api.c:140:set_working_voltage: working_voltage = 16.900000 2020-01-14 08:32:24 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. 2020-01-14 08:32:26 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. 2020-01-14 08:32:27 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. 2020-01-14 08:32:27 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 6000000, chip_divider = 7 2020-01-14 08:32:27 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7 2020-01-14 08:32:27 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7 2020-01-14 08:32:27 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2020-01-14 08:32:29 driver-btm-api.c:248:check_bringup_temp: Bring up temperature is 17 2020-01-14 08:32:29 thread.c:804:create_check_miner_status_thread: create thread 2020-01-14 08:32:29 thread.c:794:create_set_miner_status_thread: create thread 2020-01-14 08:32:29 driver-btm-api.c:581:calculate_timeout: dev->timeout = 392 2020-01-14 08:32:29 thread.c:779:create_temperature_monitor_thread: create thread 2020-01-14 08:32:29 freq_tuning.c:154:freq_tuning_get_max_freq: Max freq of tuning is 760 2020-01-14 08:32:29 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ... 2020-01-14 08:33:04 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-14 08:33:06 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.050742 2020-01-14 08:33:07 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.167080 2020-01-14 08:33:09 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.093603 2020-01-14 08:33:09 power_api.c:97:get_average_voltage: aveage voltage is: 18.103808 2020-01-14 08:33:09 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-14 08:33:09 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-14 08:33:09 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-14 08:33:10 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-14 08:33:11 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-14 08:33:12 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-14 08:33:13 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-14 08:33:13 driver-btm-api.c:612:set_timeout: freq 720 final timeout=163 2020-01-14 08:33:13 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000 2020-01-14 08:33:13 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ... 2020-01-14 08:33:40 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-14 08:33:43 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.209941 2020-01-14 08:33:46 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.320156 2020-01-14 08:33:49 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.234433 2020-01-14 08:33:49 power_api.c:97:get_average_voltage: aveage voltage is: 18.254844 2020-01-14 08:33:49 frequency.c:540:get_current_min_freq: current min freq 720 2020-01-14 08:33:49 driver-btm-api.c:1660:check_clock_counter: freq 720 clock_counter_limit 92 2020-01-14 08:33:51 thread.c:799:create_check_system_status_thread: create thread 2020-01-14 08:33:52 driver-btm-api.c:2113:bitmain_soc_init: Init done! 2020-01-14 08:33:52 driver-btm-api.c:201:set_miner_status: STATUS_INIT 2020-01-14 08:33:56 driver-btm-api.c:201:set_miner_status: STATUS_OKAY 2020-01-14 08:34:01 driver-btm-api.c:1293:dhash_chip_send_job: Version num 1 اللوج الذي يعمل علي حوض اخر غير النايس هاش(التحديث الاخير( Quote Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=124096 pcpu-alloc: 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203756K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25620K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12580K (cceb8000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 12/6, WL threshold: 4096, image sequence number: 72543235 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D94047F6-1175-4366-977B-837CC879EE19, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 39/20, WL threshold: 4096, image sequence number: 3389548455 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 721E72E7-F382-4130-AD9F-6C10D9102537, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 2020-01-13 19:51:26 driver-btm-api.c:631:init_freq_mode: This is scan-user version 2020-01-13 19:51:26 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1 2020-01-13 19:51:26 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1 2020-01-13 19:51:26 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-01-13 19:51:26 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17 2020-01-13 19:51:26 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49 2020-01-13 19:51:26 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn 2020-01-13 19:51:26 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX 2020-01-13 19:51:26 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-01-13 19:51:26 thread.c:789:create_read_nonce_reg_thread: create thread 2020-01-13 19:51:32 driver-btm-api.c:1067:init_miner_version: miner ID : 804824025c20885c 2020-01-13 19:51:32 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013 2020-01-13 19:51:34 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-13 19:51:36 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-13 19:51:37 eeprom.c:431:check_pattern_test_level: L1 board 2020-01-13 19:51:37 driver-btm-api.c:705:get_product_id: product_id[0] = 1 2020-01-13 19:51:37 driver-btm-api.c:705:get_product_id: product_id[1] = 1 2020-01-13 19:51:37 driver-btm-api.c:705:get_product_id: product_id[2] = 1 2020-01-13 19:51:37 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1 2020-01-13 19:51:37 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1 2020-01-13 19:51:37 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1 2020-01-13 19:51:37 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1 2020-01-13 19:51:37 driver-btm-api.c:644:_set_project_type: project:2 2020-01-13 19:51:37 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17 2020-01-13 19:51:37 driver-btm-api.c:685:dump_pcb_bom_version: Chain PCB Version: 0x0100 2020-01-13 19:51:37 driver-btm-api.c:686:dump_pcb_bom_version: Chain BOM Version: 0x0100 2020-01-13 19:51:37 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-01-13 19:51:37 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-01-13 19:51:37 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-01-13 19:51:37 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-01-13 19:51:39 driver-btm-api.c:1897:bitmain_board_init: Fan check passed. 2020-01-13 19:51:39 register.c:283:get_register: !!! reg crc error 2020-01-13 19:51:41 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-13 19:51:45 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 2020-01-13 19:51:46 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-13 19:51:50 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2020-01-13 19:51:52 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-13 19:51:55 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2020-01-13 19:51:55 thread.c:784:create_pic_heart_beat_thread: create thread 2020-01-13 19:51:55 power_api.c:55:power_init: power init ... 2020-01-13 19:51:55 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-01-13 19:52:27 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ... 2020-01-13 19:52:33 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-13 19:52:34 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.965019 2020-01-13 19:52:36 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.475176 2020-01-13 19:52:38 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.260869 2020-01-13 19:52:38 power_api.c:97:get_average_voltage: aveage voltage is: 17.567021 2020-01-13 19:52:38 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 2020-01-13 19:52:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-01-13 19:52:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-01-13 19:52:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-01-13 19:52:38 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2020-01-13 19:52:50 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0 2020-01-13 19:52:59 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2020-01-13 19:53:10 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2020-01-13 19:53:13 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2020-01-13 19:53:13 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2020-01-13 19:53:14 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2020-01-13 19:53:14 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0 2020-01-13 19:53:14 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2020-01-13 19:53:14 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-01-13 19:53:14 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-01-13 19:53:14 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2020-01-13 19:53:14 voltage[0] = 1690 2020-01-13 19:53:14 voltage[1] = 1690 2020-01-13 19:53:14 voltage[2] = 1690 2020-01-13 19:53:14 power_api.c:140:set_working_voltage: working_voltage = 16.900000 2020-01-13 19:53:16 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. 2020-01-13 19:53:17 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. 2020-01-13 19:53:19 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. 2020-01-13 19:53:19 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 6000000, chip_divider = 7 2020-01-13 19:53:19 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7 2020-01-13 19:53:19 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7 2020-01-13 19:53:19 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2020-01-13 19:53:20 driver-btm-api.c:248:check_bringup_temp: Bring up temperature is 17 2020-01-13 19:53:20 thread.c:804:create_check_miner_status_thread: create thread 2020-01-13 19:53:20 thread.c:794:create_set_miner_status_thread: create thread 2020-01-13 19:53:20 driver-btm-api.c:581:calculate_timeout: dev->timeout = 392 2020-01-13 19:53:20 thread.c:779:create_temperature_monitor_thread: create thread 2020-01-13 19:53:20 freq_tuning.c:154:freq_tuning_get_max_freq: Max freq of tuning is 760 2020-01-13 19:53:20 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ... 2020-01-13 19:53:55 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-13 19:53:57 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.081357 2020-01-13 19:53:59 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.167080 2020-01-13 19:54:01 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.093603 2020-01-13 19:54:01 power_api.c:97:get_average_voltage: aveage voltage is: 18.114013 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-13 19:54:01 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-13 19:54:02 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1 2020-01-13 19:54:03 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1 2020-01-13 19:54:04 driver-btm-api.c:612:set_timeout: freq 720 final timeout=163 2020-01-13 19:54:04 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000 2020-01-13 19:54:04 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ... 2020-01-13 19:54:31 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-13 19:54:34 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.240556 2020-01-13 19:54:37 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.326279 2020-01-13 19:54:41 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.246679 2020-01-13 19:54:41 power_api.c:97:get_average_voltage: aveage voltage is: 18.271172 2020-01-13 19:54:41 frequency.c:540:get_current_min_freq: current min freq 720 2020-01-13 19:54:41 driver-btm-api.c:1660:check_clock_counter: freq 720 clock_counter_limit 92 2020-01-13 19:54:43 thread.c:799:create_check_system_status_thread: create thread 2020-01-13 19:54:43 driver-btm-api.c:2113:bitmain_soc_init: Init done! 2020-01-13 19:54:43 driver-btm-api.c:201:set_miner_status: STATUS_INIT 2020-01-13 19:54:48 driver-btm-api.c:201:set_miner_status: STATUS_OKAY 2020-01-13 19:55:02 driver-btm-api.c:1293:dhash_chip_send_job: Version num 1 2020-01-13 19:55:12 driver-btm-api.c:1293:dhash_chip_send_job: Version num 4 2020-01-13 19:55:16 thread.c:382:check_working_voltage: current PCB min temperature is 41 2020-01-13 19:55:16 thread.c:383:check_working_voltage: current voltage is 17.90V, recovery to 16.90V 2020-01-13 19:55:16 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ... 2020-01-13 19:55:48 power_api.c:124:check_voltage_multi: retry time: 0 2020-01-13 19:55:50 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.187392 2020-01-13 19:55:52 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.285361 2020-01-13 19:55:55 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.248623 2020-01-13 19:55:55 power_api.c:97:get_average_voltage: aveage voltage is: 17.240459 2020-01-13 20:00:54 thread.c:422:is_zero_nonce_happened: chain_nonce[0] = 18101 2020-01-13 20:00:54 thread.c:422:is_zero_nonce_happened: chain_nonce[1] = 17812 2020-01-13 20:00:54 thread.c:422:is_zero_nonce_happened: chain_nonce[2] = 18076 2020-01-13 20:25:55 thread.c:204:calc_hashrate_avg: avg rate is 43449.37 in 30 mins 2020-01-13 20:25:55 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-13 20:55:56 thread.c:204:calc_hashrate_avg: avg rate is 43336.34 in 30 mins 2020-01-13 20:55:56 temperature.c:450:temp_statistics_show: pcb temp 41~54 chip temp 66~80 2020-01-13 21:25:58 thread.c:204:calc_hashrate_avg: avg rate is 43503.58 in 30 mins 2020-01-13 21:25:58 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-13 21:55:59 thread.c:204:calc_hashrate_avg: avg rate is 43653.85 in 30 mins 2020-01-13 21:55:59 temperature.c:450:temp_statistics_show: pcb temp 41~55 chip temp 66~80 2020-01-13 22:26:00 thread.c:204:calc_hashrate_avg: avg rate is 43404.55 in 30 mins 2020-01-13 22:26:00 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-13 22:56:01 thread.c:204:calc_hashrate_avg: avg rate is 43437.54 in 30 mins 2020-01-13 22:56:01 temperature.c:450:temp_statistics_show: pcb temp 41~54 chip temp 66~80 2020-01-13 23:26:03 thread.c:204:calc_hashrate_avg: avg rate is 43445.93 in 30 mins 2020-01-13 23:26:03 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 65~80 2020-01-13 23:56:04 thread.c:204:calc_hashrate_avg: avg rate is 43184.22 in 30 mins 2020-01-13 23:56:04 temperature.c:450:temp_statistics_show: pcb temp 41~54 chip temp 66~80 2020-01-14 00:26:05 thread.c:204:calc_hashrate_avg: avg rate is 43414.31 in 30 mins 2020-01-14 00:26:05 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-14 00:56:07 thread.c:204:calc_hashrate_avg: avg rate is 43207.67 in 30 mins 2020-01-14 00:56:07 temperature.c:450:temp_statistics_show: pcb temp 41~55 chip temp 66~80 2020-01-14 01:26:08 thread.c:204:calc_hashrate_avg: avg rate is 43043.22 in 30 mins 2020-01-14 01:26:08 temperature.c:450:temp_statistics_show: pcb temp 41~55 chip temp 67~80 2020-01-14 01:56:09 thread.c:204:calc_hashrate_avg: avg rate is 43511.56 in 30 mins 2020-01-14 01:56:09 temperature.c:450:temp_statistics_show: pcb temp 40~55 chip temp 66~80 2020-01-14 02:26:11 thread.c:204:calc_hashrate_avg: avg rate is 43656.22 in 30 mins 2020-01-14 02:26:11 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-14 02:56:12 thread.c:204:calc_hashrate_avg: avg rate is 43388.33 in 30 mins 2020-01-14 02:56:12 temperature.c:450:temp_statistics_show: pcb temp 40~55 chip temp 66~81 2020-01-14 03:26:13 thread.c:204:calc_hashrate_avg: avg rate is 43617.73 in 30 mins 2020-01-14 03:26:13 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-14 03:56:14 thread.c:204:calc_hashrate_avg: avg rate is 43377.63 in 30 mins 2020-01-14 03:56:14 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 65~80 2020-01-14 04:26:16 thread.c:204:calc_hashrate_avg: avg rate is 43459.97 in 30 mins 2020-01-14 04:26:16 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-14 04:56:17 thread.c:204:calc_hashrate_avg: avg rate is 43361.97 in 30 mins 2020-01-14 04:56:17 temperature.c:450:temp_statistics_show: pcb temp 40~55 chip temp 66~80 2020-01-14 05:26:18 thread.c:204:calc_hashrate_avg: avg rate is 43537.85 in 30 mins 2020-01-14 05:26:18 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80 2020-01-14 05:56:20 thread.c:204:calc_hashrate_avg: avg rate is 43637.74 in 30 mins 2020-01-14 05:56:20 temperature.c:450:temp_statistics_show: pcb temp 40~55 chip temp 66~81 2020-01-14 06:26:21 thread.c:204:calc_hashrate_avg: avg rate is 43388.46 in 30 mins 2020-01-14 06:26:21 temperature.c:450:temp_statistics_show: pcb temp 40~54 chip temp 66~80<

Pages: [1] 2 »