Show Posts
|
Pages: « 1 [2] 3 »
|
Anyone know a coin that is using the old swap algo? Believe it was renamed "Super Fast".
I know about FuryCoin, it uses that algo Thanks Dok! And algo "Super Fast" is not support by srbminer...
|
|
|
why not mbc just for fun lol
well, that needs deeper learning of algorithm, anime was done as a LEGO from already implemented hashfuncs ) which coin use anime algo ?
|
|
|
algo Cryptonight HeavyX and MTP when? HeavyX for X-cash is already available, it's called cnv8_dbl in TRM. We're still debating how to prioritize MTP. The issue is the big investment in time for building the custom stratum protocol, submitting those huge proofs etc, all for a single coin and algo. there will be new coins on mtp np; very good project tecracoin, mtp has a future how do you know MTP is the future? what do I know progpow -maybe it's the future.. why MTP it is
|
|
|
actually im getting 1.3 mh with monitor off , just standard auto and a standard rx480 8gb , with i7 4770 overclocked cpu , nothing special windows 7.
is good, but i'm getting 1.5 Mh/s on rx 580 8gb
|
|
|
on sin im getting 930.1 kh/s on a rx480 not bad.
hi, clocks? core voltage? timings straps?etc...
|
|
|
Hi guys, Sometimes one of my Vega56 gets in trouble with only one of the two threads. I tried to use the --watchdog_script parameter but unfortunately it works only for a dead GPU. Do you know any settings I can use for the "half dead" GPU? @todxx Is it possible to implement an internal watchdog for the threads(just in case only one thread will die the watchdog would restart only that thread)? Tnx to the devs for this awesome miner! @kerney666 An internal watchdog, is it possible? Hi! Must have missed this post earlier. Yeah, I’ve noticed this behavior as well, very annoying! We need to check both threads individually. Will schedule it for an upcoming version. It is possible to make algorithm switching to mine on pools like moneroocean ? thx Unfortunately, implementing native algo switching isn't very high up on the priority list. However, I did spend some time to make sure the MoneroOcean meta-miner is compatible with TRM. Don't know how tech savvy you are, it was a few months ago that I tested it myself, but it was working fine at the time. The Meta Miner is here, my pull request to add support for TRM was accepted in > 1 month ago: https://github.com/MoneroOcean/meta-miner. Check it out and let me know if you need assistance. Thx, i need assistance to config thx
|
|
|
Hi guys, Sometimes one of my Vega56 gets in trouble with only one of the two threads. I tried to use the --watchdog_script parameter but unfortunately it works only for a dead GPU. Do you know any settings I can use for the "half dead" GPU? @todxx Is it possible to implement an internal watchdog for the threads(just in case only one thread will die the watchdog would restart only that thread)? Tnx to the devs for this awesome miner! @kerney666 An internal watchdog, is it possible? Hi! Must have missed this post earlier. Yeah, I’ve noticed this behavior as well, very annoying! We need to check both threads individually. Will schedule it for an upcoming version. It is possible to make algorithm switching to mine on pools like moneroocean ? thx
|
|
|
Hey guys i have a problem with my vega 64 x6 GPU rig. After i started to mine on of my GPUs are crashing and then make whole rig crash. Im using 19.4.1 driver and msi afterburner 1050 mem clock and MSI vega 64 with sumsong memory. helia registery edited any idea ?
Hi! A little difficult to say. How much have you played around with clocks and powerplay tables? Unless there is some hardware issue, working with clocks is pretty much what we can do. It is possible to make algorithm switching to mine on pools like moneroocean ? thx
|
|
|
the cpu is 100% load, intel g4400... so i stick with 0.16.4
Oh, ok, I will try to find a solution here. And what about 0.16.4, what CPU load you can see there? 20-25%
|
|
|
I found where the problem was, i have a rig with 12 gpu 10 rx 580 8gb and 2 rx 570 4gb, when i run only 7 gpu(--opencl-devices 0...6) the speed is good 23 MH/s per gpu, after add more then 7 gpu the speed is slowing down. On 0.16.4 i don't have this issuse
What CPU you have and is there high CPU load? Also can you try to run two instances of miner(use parameter --multiple-instance) where first one will 0..5 gpu, and second one - 6..11? the cpu is 100% load, intel g4400... so i stick with 0.16.4
|
|
|
0.16.5 beta - should be better stability for wildkeccak using --scratchpad-safe-update on some systems - improved x16-like(Shavite at start), honeycomb and skunkhash
Hi, the speed is below on 0.16.5 (16 MH/s) then 0.16.4(22 MH/s) why? i try worksize(256) on start is show me 0/256 and if i put --opencl-launch=17x256 it show me 256/256 and the speed go up 21 MH/s on 0.16.5 but not 22Mh/s like 0.16.4 specify the algo and your gpu's, I'm not a magician sorry ).. honeycomb obvious I have tested on my RX570 all possible variants of clocks, and 0.16.5 is faster around 500kH/s %) I have tried stock 1244/1750, eth-like 1100/2000. And you didn't answer for my question. What kind of GPU do you use? And what clocks? Also what memory type you get and what timings? Maybe some changes to power limit? New version utilize core more, so everything matter. I found where the problem was, i have a rig with 12 gpu 10 rx 580 8gb and 2 rx 570 4gb, when i run only 7 gpu(--opencl-devices 0...6) the speed is good 23 MH/s per gpu, after add more then 7 gpu the speed is slowing down. On 0.16.4 i don't have this issuse
|
|
|
0.16.5 beta - should be better stability for wildkeccak using --scratchpad-safe-update on some systems - improved x16-like(Shavite at start), honeycomb and skunkhash
Hi, the speed is below on 0.16.5 (16 MH/s) then 0.16.4(22 MH/s) why? i try worksize(256) on start is show me 0/256 and if i put --opencl-launch=17x256 it show me 256/256 and the speed go up 21 MH/s on 0.16.5 but not 22Mh/s like 0.16.4 specify the algo and your gpu's, I'm not a magician sorry ).. honeycomb obvious
|
|
|
0.16.5 beta - should be better stability for wildkeccak using --scratchpad-safe-update on some systems - improved x16-like(Shavite at start), honeycomb and skunkhash
Hi, the speed is below on 0.16.5 (16 MH/s) then 0.16.4(22 MH/s) why? i try worksize(256) on start is show me 0/256 and if i put --opencl-launch=17x256 it show me 256/256 and the speed go up 21 MH/s on 0.16.5 but not 22Mh/s like 0.16.4
|
|
|
We need HEAVY algos ! we need it, we need it ! ... we really need it, plzzzzz (At least i've tryied) Yes we need it soo bad ) don't need so much x-cash... need more bittubev2, haven...
|
|
|
I have 1x rx 580 8 GB how much get total hashrate? I want try use GPU, but still use cpu mining now please give me info if you know, thank you miner RX 580 will got about 20 MH/s . Using WildRig Multi Miner, you can find this miners at Mining forum. Hi, and how many coins make with 20 MH/s in 24H ?
|
|
|
I am eagerly awaiting v16.3!
Are you reading my messages? %) I have already uploaded 0.16.3 for you and gave a link to test with parameter --scratchpad-safe-update NO MESSAGE-- If you sent something by forum mail, I did not receive it. I checked yesterday and today. Today I also checked my forum mail options, and you should not be blocked. Please re-send, thanks. --scryptr Here. There you will find hyperlink "this build". Rainforest v2 coming soon?
|
|
|
How can I mine MBC?
Hard u can mine, this guys don't want you to mine....private pools..etc shame
|
|
|
hi, calculator for this coin? with 270 MH/s how much coins will be? thx
|
|
|
Can TRM be used for Conceal coin?
Anyone please help.
NO,they not support bitube,haven(coins with good volume) ... and u want Conceal??
|
|
|
|