Show Posts
|
Pages: [1] 2 3 4 5 »
|
Has anyone know of a working package for RDP or Teamviewer for the Full node unit ?
|
|
|
I would take remaining 17 S17's and escrow with philipma
|
|
|
Is this still orderable ?
|
|
|
The second generation of Obelisk SC1 miners doesn't provide any complete standard interface for monitoring. It doesn't include hashrate and a number of other important properties that you would expect from an ASIC miner. This is why it show up in Awesome Miner with just some information. This worked fine with the first generation of these miners, but then they decided to no longer support this way of monitoring their miners. According to the guys writing the firmware for them their API will allow all this information and alot more.
|
|
|
My S17 Pro 53TH/s had default Antminer pools. All the boards also report the same frequency and turbo is 595.
Very Interesting...... If I do a factory default on the unit here is what my kernel log shows and all 3 boards in my unit clock differently in both Normal or Low Power modes. Maybee I get lucky and its just a goofed factory flash but I cant even try and reload it because it hasn't been posted. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 190356K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 39020K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 25980K (cc1a1000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 306349061 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 1751317449 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab011 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 [2019-05-01 22:46:11.705] httpListenThread start ret=0 2019-05-01 22:46:11 driver-btm-soc.c:3160:init_freq_mode: This is scan-user version 2019-05-01 22:46:11 driver-btm-soc.c:3896:bitmain_soc_init: opt_multi_version=1 2019-05-01 22:46:11 driver-btm-soc.c:3897:bitmain_soc_init: opt_bitmain_ab=1 2019-05-01 22:46:11 driver-btm-soc.c:3898:bitmain_soc_init: opt_bitmain_work_mode=2 2019-05-01 22:46:11 driver-btm-soc.c:3521:_show_sn: no SN got, please write SN to /nvdata/sn 2019-05-01 22:46:11 driver-btm-soc.c:3191:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX 2019-05-01 22:46:11 driver-btm-soc.c:3904:bitmain_soc_init: Miner compile time: Tue Apr 16 19:03:06 CST 2019 2019-05-01 22:46:11 driver-btm-soc.c:3906:bitmain_soc_init: last commit version: 8b856e7 commit time: 2019-04-16 16:36:14 build: 2019-04-16 19:07:51 2019-05-01 22:46:11 driver-btm-soc.c:3223:check_fan_multi: check fan for 20 times... 2019-05-01 22:46:13 driver-btm-soc.c:3299:init_miner_version: miner ID : 81280c2e57408854 2019-05-01 22:46:13 driver-btm-soc.c:3305:init_miner_version: FPGA Version = 0xB011 2019-05-01 22:46:13 driver-btm-soc.c:404:check_chain: !! chain[0]is exist 2019-05-01 22:46:13 driver-btm-soc.c:404:check_chain: !! chain[1]is exist 2019-05-01 22:46:13 driver-btm-soc.c:404:check_chain: !! chain[2]is exist 2019-05-01 22:46:17 driver-btm-soc.c:3722:get_product_id: product_id[0] = 0 2019-05-01 22:46:17 driver-btm-soc.c:3722:get_product_id: product_id[1] = 0 2019-05-01 22:46:17 driver-btm-soc.c:3722:get_product_id: product_id[2] = 0 2019-05-01 22:46:17 driver-btm-soc.c:3823:bitmain_board_init: g_product_id = 0 2019-05-01 22:46:17 driver-btm-soc.c:3574:_set_project_type: Project type: Antminer S17 2019-05-01 22:46:17 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101 2019-05-01 22:46:17 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103 2019-05-01 22:46:17 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101 2019-05-01 22:46:17 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103 2019-05-01 22:46:17 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101 2019-05-01 22:46:17 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103 2019-05-01 22:46:17 driver-btm-soc.c:3791:check_pool_worker: No valid pools, please configure them first!
|
|
|
After further testing the 3rd hashboard that was reporting 12,000GH finally dropped offline, the first 2 hashboards clock at 575mhz and 600mhz and the 3rd that was showing 615mhz. Now after multiple reboots and factory defaults sometimes it detects 22, 38, or 41 chips. I am hopings its just a goofed up flash but I am doubting it at this point. Did anyone else notice on theirs that there were NO pools configured by default which I find odd since this is the first I have ever seen that had no default pools configured. Below is a copy of the kernel log..... 22:06:18 driver-btm-soc.c:3160:init_freq_mode: This is scan-user version 22:06:18 driver-btm-soc.c:3896:bitmain_soc_init: opt_multi_version=1 22:06:18 driver-btm-soc.c:3897:bitmain_soc_init: opt_bitmain_ab=1 22:06:18 driver-btm-soc.c:3898:bitmain_soc_init: opt_bitmain_work_mode=2 22:06:18 driver-btm-soc.c:3521:_show_sn: no SN got, please write SN to /nvdata/sn 22:06:18 driver-btm-soc.c:3191:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX 22:06:18 driver-btm-soc.c:3904:bitmain_soc_init: Miner compile time: Tue Apr 16 19:03:06 CST 2019 22:06:18 driver-btm-soc.c:3906:bitmain_soc_init: last commit version: 8b856e7 commit time: 2019-04-16 16:36:14 build: 2019-04-16 19:07:51 22:06:18 driver-btm-soc.c:3223:check_fan_multi: check fan for 20 times... 22:06:20 driver-btm-soc.c:3299:init_miner_version: miner ID : 81280c2e57408854 22:06:20 driver-btm-soc.c:3305:init_miner_version: FPGA Version = 0xB011 22:06:20 driver-btm-soc.c:404:check_chain: !! chain[0]is exist 22:06:20 driver-btm-soc.c:404:check_chain: !! chain[1]is exist 22:06:20 driver-btm-soc.c:404:check_chain: !! chain[2]is exist 22:06:24 driver-btm-soc.c:3722:get_product_id: product_id[0] = 0 22:06:24 driver-btm-soc.c:3722:get_product_id: product_id[1] = 0 22:06:24 driver-btm-soc.c:3722:get_product_id: product_id[2] = 0 22:06:24 driver-btm-soc.c:3823:bitmain_board_init: g_product_id = 0 22:06:24 driver-btm-soc.c:3574:_set_project_type: Project type: Antminer S17 22:06:24 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101 22:06:24 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103 22:06:24 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101 22:06:24 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103 22:06:24 driver-btm-soc.c:3321:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101 22:06:24 driver-btm-soc.c:3322:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103 22:06:25 pic.c:619:pic_reset: chain[0] ok 22:06:29 pic.c:898:jump_to_app_from_loader: chain[0] ok 22:06:30 pic.c:619:pic_reset: chain[1] ok 22:06:34 pic.c:898:jump_to_app_from_loader: chain[1] ok 22:06:35 pic.c:619:pic_reset: chain[2] ok 22:06:39 pic.c:898:jump_to_app_from_loader: chain[2] ok 22:06:39 driver-btm-soc.c:3840:bitmain_board_init: Enter 30s sleep to make sure power release finish. 22:06:39 driver-btm-soc.c:1156:heart_beat_func_one_chain: for chain 2 22:06:39 driver-btm-soc.c:1156:heart_beat_func_one_chain: for chain 1 22:06:39 driver-btm-soc.c:1156:heart_beat_func_one_chain: for chain 0 22:07:09 power.c:216:power_init: power init ... 22:07:11 power.c:348:power_get_firmware_version: power firmware version is 00 06 22:07:13 power.c:338:power_get_device_no: power device no is 00 41 22:07:13 power.c:203:power_check_protocol_type: power protocol 00, using package cmd 22:07:13 power.c:204:power_check_protocol_type: power type APW9 3600W 22:07:13 power.c:155:power_on: init gpio907 22:07:14 power.c:624:set_iic_power_to_highest_voltage: setting to voltage: 21.00 ... 22:07:16 power.c:573:set_iic_power_by_voltage: now setting voltage to : 21.000000 22:07:16 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 22:07:20 pic.c:234:hashboard_power_cntl: [1] ok, i2c=0! 22:07:22 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 22:07:25 driver-btm-soc.c:3657:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0 22:07:25 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 22:07:29 pic.c:234:hashboard_power_cntl: [1] ok, i2c=1! 22:07:31 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 22:07:34 driver-btm-soc.c:3657:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0 22:07:34 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 22:07:38 pic.c:234:hashboard_power_cntl: [1] ok, i2c=2! 22:07:40 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 22:07:44 driver-btm-soc.c:3657:check_asic_number_with_power_on: Chain[2]: find 22 asic, times 0 22:07:44 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 22:07:48 pic.c:234:hashboard_power_cntl: [1] ok, i2c=2! 22:07:50 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 22:07:54 driver-btm-soc.c:3657:check_asic_number_with_power_on: Chain[2]: find 22 asic, times 1 22:07:54 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 22:07:58 pic.c:234:hashboard_power_cntl: [1] ok, i2c=2! 22:08:00 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 22:08:04 driver-btm-soc.c:3657:check_asic_number_with_power_on: Chain[2]: find 22 asic, times 2 22:08:04 driver-btm-soc.c:3682:check_asic_number: Chain 2 only find 22 asic, will power off hash board 2 22:08:05 pic.c:234:hashboard_power_cntl: [0] ok, i2c=2! 22:08:05 chip139x.c:736:set_order_clock: chain[0]: set order clock, stragegy 3 22:08:05 chip139x.c:736:set_order_clock: chain[1]: set order clock, stragegy 3 22:08:11 chip139x.c:318:set_baud_one_chain: chain[0]: chip baud = 6000000, chip_divider = 7 22:08:11 chip139x.c:318:set_baud_one_chain: chain[1]: chip baud = 6000000, chip_divider = 7 22:08:11 chip139x.c:275:set_baud_fpga: set fpga_baud = 6000000, fpga_divider = 3 22:08:11 chip139x.c:837:set_core_clock_delay_control: pwth_sel = 3, ccdly_sel = 0 22:08:11 chip139x.c:852:set_core_clock_delay_control: set CLOCK_DELAY_CTRL to 0x34 voltage[0] = 1840 voltage[1] = 1840 22:08:11 power.c:233:set_working_voltage: working_voltage = 18.400000 sensor type = 1,sensor num = 4 sensor pos: 12 9 37 40 0 0 0 0
|
|
|
i wonder if you got a miss labeled S17 pro, it runs at 50 TH for normal mode - does it have turbo mode option? If not, I would be in contact with Bitmain - 6 TH is a bit of a variance, too big to overlook in my opinion.
and if you did get a S17pro - I would be asking for some money back as its about 75 USD cheaper.
Nope standard S17 56th unit, it appears bitmains auto-tune function is broken because my my first 2 hashboards are avg 18000gh each and board #3 is averaging 12000gh and I only have Normal and Low Power, no turbo.
|
|
|
I received a S17 56TH unit today and seems it will only run at about 50TH in Normal or Low Power mode, anyone else seem similar behaviour?
|
|
|
Got email earlier today, they have not been issued yet.
|
|
|
I would be interested, when would we expect delivery after payment?
as soon as we reach moq (10 units) and we pay. shipping will be right away Put me down for 1 if you can wrangle 9 more buyers in enough time (funds set aside awaiting info)
|
|
|
I would be interested, when would we expect delivery after payment?
|
|
|
No troll intended purely a FYI but these are selling for half or less of your asking price.
|
|
|
Sale of 1 Z9 Mini completed yesterday to Stinkfist666, thanks for such a smooth transaction Stink!
|
|
|
Market value is about substantially less than than your asking I purchased 2 of them this week for $1800 each, if your are interested in selling in that range drop me a PM
|
|
|
Phil is legit and his pricing is spot on, You can buy L21's with PSU for $90 shipped in QTY 25 lots.
|
|
|
Maybe it was a typo and he meant $200
|
|
|
|