Just update to 1.8.9, Win 10, 7 RX 580 cards

getting an error:
Error CL_INVALID_WORK_GROUP_SIZE when calling clEnqueueNDRangeKernel for kernel 00 for DeviceID 4 (Thread 9)

any idea?

this is my config:

{
"cryptonight_type" : "upx2",
"double_threads" : true,
"gpu_conf" :
[
       {"id" : 0, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 1, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 2, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 3, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 4, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 5, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 6, "intensity" : 105, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true}
]
}

nice, will test asap !
thx

Those are for Vega, not RX cards, sorry needed to specify that!

Hi,

any plans to add AMDTweakTool or Claymore type of stripe to increase AMD RX cards hashrate ?

thx

I tried to set the REF and RTC as you mention on my RX580 8Gb Hynex but as soon as I push apply, it gets back to original values, any idea?
thx

ok great!

anyone got some RX580 8Gb hynex card settings different from what the miner selects?

thx

Hello,

when I start the miner I get these settings:

GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 1]
GPU1: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 2]
GPU2: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 3]
GPU3: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 5]
GPU4: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 6]
GPU5: Radeon RX 580 Series [ellesmere] [8192 MB][I: 107.0][W: 8][T: 2][F: 4][BUS: 7]
GPU6: Radeon RX 580 Series [ellesmere] [4096 MB][I: 105.0][W: 8][T: 2][F: 4][BUS: 9]

But in the config I have Intensity 0 and no Fragment set at all !

Are these an optimal config for my cards or are overridden by the config file ?

thx

How do you remove the driver installed by EthDcr...exe ?

I know Hynex is not the best but I got to 31 Mh/s, so wanted to see if the AMD Tweak tool increase that.

It would be good if the tool does what Claymore has, like a DB for common cards, with some "optimal" / "baseline" strap and than one can tweak it some more based on OC and cards differences, for example silicon!

Hopefully we get there with the tool

you need to use a command line, go to start -> cmd -> right click for use as admin and than type the eth install command

after that you can run the bat as normal, no need admin

Hello,
I played with tweaking core and memory for RX580 8Gb and 4Gb with hynex mem, but cannot reach an optimal setup with timing.

Isn't possible to do like claymore is doing?

Recognizing the GPU and Memory and than applying a "optimal" tweak ?
If there are enough data from the community for the various cards, would that be possible?

thx
great tool btw !

Hi,

testing 14.1 on win 10 with 5 RX580 cards but getting an all cards 0 Mh/s

EthDcrMiner64.exe -mport 0 -epool stratum+ssl://eu1-etc.ethermine.org:5555 -ewal xxxxxxxxxxxxxxxxxxxx.AMD -epsw x -tstop 80 -tt 65 -fanmin 70 -fanmax 95 -eres 2 -gser 2 -dcri 8 -etha 0 -ethi 15 -asm 2 -wd 1 -dbg -1 -platform 1 -estale 0 -y 1 -showdiff 1


any idea?
thx

.exe is for windows not for linux, get the linux version

Can you share some of those tRFC settings, it will give me an idea where to start on RX580s.
Thx

So you were able to gain Mh with a RX480 bios modded?
How much gain you got ?

I was wondering since I have RX580s bios modded so I wanted to know if the gain is worth it.

thx

thx for the info !

So without reverting to stock bios the tool does not work or we get better results from stock?

please share your finding as the number of parameter are so many that is difficult to keep track.
Also my RX 580 8Gb is Hynex memory so might be different from others.

cheers

ok solved:

--platform 0 and not -platform 0

if I run the list of devices I get this? I should see 7 RX 580 instead. Any ideas?

Microsoft Windows [Version 10.0.17134.191]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\Users\miner>cd C:\Mining\batch\teamredminer-v0.4.5-win\teamredminer-v0.4.5-win

C:\Mining\batch\teamredminer-v0.4.5-win\teamredminer-v0.4.5-win>teamredminer.exe --list_devices
          Team Red Miner version 0.4.5
[2019-05-03 10:32:21] Auto-detected AMD OpenCL platform 0
[2019-05-03 10:32:21] Auto-detected AMD OpenCL platform 2

C:\Mining\batch\teamredminer-v0.4.5-win\teamredminer-v0.4.5-win>

I saw a lot of Vegas but are there settings for RX 580 8Gb and 4Gb ?

thx

can you help me with the config file?
I am running the following command to miner UPX2 but the miner crash:

teamredminer.exe -a cnv8_upx2 -o stratum+tcp://uplexa.herominers.com:10472 -u address -p win10

Any idea?
thx