Hi All,
this is probably a dumb question but I am looking to control GPU temps in CCminer2.3.  My rig has 11 various Nvidia cards (1060 3gb, 1060 6gb, 1070,...) and we all know that Afterburner only controls 8. 

My thought was to use the "--max-temp=N" command line option but couldn't find a way to control fan speed.

Can you control fan speed via a command line option with CCminer?

Sorry if this is obvious.

Thanks

When will Raven be on a hardware wallet?  Preferably a Legend nano.

is this being worked on by anyone?

Are other coins susceptible to this kind of mining pool attack or was there something unique with Raven that allowed it?

Were actual individual wallets hacked or were mining pool wallets hacked?

What hash range are people seeing with RX580?  I really do not see 7 or 8 for any length of time.   

At stock settings of core and mem, -5 power level, 256 difficulty, no -g option (see below), I'm seeing 6.0 to 7.1. 
I'm going to let it run overnight at difficulty 320 to see where that lands.


Also, with version 1.3, -g 2 does not work for me with my 11 cards when I use the -d option with 6 cards or less.  SGMiner crashes while it's building the bin file.  The -g option did work with 1.2 but I didn't really see an improvement in hash rate.  I'm only running a celeron could that be an issue?

Thanks

Same here.  Also making half of what I made last week.
See the difficulty chart on this site.  

rvnstats.info

It's the little small green chart on the right.  Difficulty went from 16,511 to 19,477.

Just what I needed. 

Thanks Bitebyte!

Unfortunately Hash4life only shows 100 transaction so i will check the other explorers when I get home.

Thanks!

Hi All,
Pardon my ignorance, but is there a block explorer or way for me to see every mining transaction that has occured to my wallet?

Thanks

What functionality and application do you see being needed in a year or two?

Would like to hear your insight.

Thanks

What is your definition of dropping like a rock?  50MH/s to 40MH/s?  Or is it much more extreme like 50MH/s to 5MH/s?

And are you looking at the miner hash rate or the observed hash rate from the pool you're mining?

This is a great idea.  Duh!  I could have thought of that. 

I'll give it a try tonight and get back to you.  Thanks!

Hi All,
Another question.  I seem to get the highest and most consistent hash rate from 1.0.  My hashrate for 1.1 is significantly lower than 1.0.

I've got a 12 card system with 6-580s, 3-570s, 2-480s, and a R9290.

I obviously do not use -g 2 because of the 12 cards but have tried different intensities from 64 to 512 and 1.0 comes out on top.

Any explanation?

Thanks!

Thanks for the tips!

Hi Brian,
Great miner. 

Question, What does the -w 64 command do?  Should we be adjusting this or do you have guidelines on how to adjust it for max hash rate?

Thanks

Hi All,

I have a few questions regarding mining fees for Z-enemy miner 1.08.  The fee is clearly stated as being 1% or 1 minute of mining for every 100 minutes. 

Due to pure random chance I happened to observe the mining fee period and I saw the following:

15:52:29  Mining Some Dev Fee
...
Bunch of hash order commands
...
15:55:05 Done Mining Dev Fee

The 1% fee in this instance appeared to take ~2.5 minutes.  It might actually be a 1% fee but it might have an impact on mining of 2.5%. 

But maybe the mining period is not literally 1 minute every 100 minutes.  If it was 2 minutes every 200 minutes then there wouldn't be as much impact on mining if the mining duration is 2.5 minutes.

• How long does it normally take to mine the 1% fee?
• Is 2.5 minutes for 1% a typical duration?
• Is this how all Ravencoin miners work if they have a fee?
• What do others see when using this miner during the fee mining period?

Don't let my questions indicate I don't like this miner or the fact that it has a fee.  It appears to be quite fast and if the speed difference is significant (which I think it is) the fee is worth it.  I just want to have the appropriate expectations especially when comparing a miner with a fee versus a miner that does not have a fee.   

Your insight is appreciated.


Thanks!

If you're looking for a large pool most people seem to be using Suprnova (https://rvn.suprnova.cc/) or Ravenminer (http://ravenminer.com/).  But it is probably best to try a few different ones to see what works best for you.  Probably can't go wrong giving one of these two pools a try to start out with.

If you want a medium or smaller pool best bet is to just go through this thread identify them and then check them out.  There are a lot of smaller pools out there. 

Good luck

 

Hi WickedPigeon,
This is great and very helpful info.

Thanks!

Hi WickedPigeon,
What GPUs are you mining with?  Are they all 1080s?  If not could you provide a breakdown of what they are?

One of my mining rigs is 1x1070 and 7x1060.  It runs for weeks without a hiccup so I don't want to mess with it if there won't be a significant improvement.

Your insight is greatly appreciated.

Thanks

Hi Beursstarter!  

Appreciate your reply.  Now that you mention it I have a couple 1050s running as well so this is good to know.

Thanks!