Bitcoin Forum
February 17, 2020, 10:45:27 PM *
News: Latest Bitcoin Core release: 0.19.0.1 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »
81  Bitcoin / Hardware / Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi on: August 16, 2015, 06:29:58 AM
Yeah there are different versions of the blades.Tx and Rx are still same pins in connector.I think too that oscillators kill some blades.I had one which had also voltages ok but no hashing.I really don't have S3's anymore,I bought a couple of blades just to play with.I think I'm going to try if I can get S1 controller to work with these blades.Ofcourse they have to be reprogrammed.

I want to try your schematic but to be honest im lasy of finding the rx/tx pins on my connectors since i dont have the pads.
Would you mind telling which are the pins in question.

Appreciated
82  Bitcoin / Hardware / Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi on: August 16, 2015, 06:25:00 AM
You can flash the s3 on the S1, thats how the blade upgrades work. but im not much of a software expert.
83  Bitcoin / Hardware / Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi on: August 16, 2015, 05:50:14 AM
I dont know, i used a selfmade level shifter from a BF rig and it didnt want to see the blades, (which i know works because the BF rig hashes).
A controller saw them.

I saw different versions of pcb, not all of them have those RX/TX pads. Also some of them have the 25mhz oscillator on the side, some in the middle and some dont have it at all.

I think some blades die because of those oscillators, i have two that dont hash at all but the voltage out of each vrm is good.
84  Bitcoin / Hardware / Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi on: August 16, 2015, 05:35:11 AM
Niiiice, i tried with a tx1040 but it didnt wanna go Smiley
85  Bitcoin / Hardware / Re: HashFast BabyJet users thread on: August 14, 2015, 09:48:51 PM
Does anyone have an SD Rpi firmware upgrade image for a BJ?
86  Bitcoin / Hardware / Re: HashFast BabyJet users thread on: August 14, 2015, 07:56:59 PM
Im sorry for the wall of text but does anyone have any ideea how to fix this? Any help appreciated.

[2015-08-14 21:08:59.168] Global quota greatest common denominator set to 1
 [2015-08-14 21:08:59.173] Started cgminer 4.9.2
 [2015-08-14 21:08:59.174] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2015-08-14 21:08:59.175] USB scan devices: checking for HFA devices
 [2015-08-14 21:08:59.176] RES: thread starting
 [2015-08-14 21:08:59.342] HFA looking for and found HFA 297c:0001
 [2015-08-14 21:08:59.342] USB lock Hashfast 1-14
 [2015-08-14 21:08:59.343] RES: Hashfast (1:14) lock=1
 [2015-08-14 21:08:59.343] USB res lock Hashfast 1-14
 [2015-08-14 21:08:59.343] RES: Hashfast (1:14) lock ok=1
 [2015-08-14 21:08:59.393] USB init, kernel attached ... - HFA device 1:14-i1
 [2015-08-14 21:08:59.398] USB init, kernel detached ifinfo 0 interface 1 successfully - HFA device 1:14-i1
 [2015-08-14 21:08:59.419] USB init - HFA device 1:14-i1 usbver=0200 prod='M1 Module' manuf='HashFast LLC' serial='xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
 [2015-08-14 21:08:59.920] HFA : Sending OP_NAME frame
 [2015-08-14 21:08:59.921] USB: HFA0 read1 buffering 32 extra bytes
 [2015-08-14 21:08:59.922] HFA: Returned an OP_NAME
 [2015-08-14 21:08:59.922] HFA: Found device with name hf2
 [2015-08-14 21:08:59.923] HFA looking for HFA 297c:0001 but found 0424:ec00 instead
 [2015-08-14 21:08:59.923] HFA looking for HFA 297c:0001 but found 0424:9514 instead
 [2015-08-14 21:08:59.923] HFA looking for HFA 297c:0001 but found 1d6b:0002 instead
 [2015-08-14 21:08:59.924] Pushing sem post to thread 0
 [2015-08-14 21:08:59.924] Probing for an alive pool
 [2015-08-14 21:08:59.925] Testing pool stratum+tcp://stratum.antpool.com:3333
 [2015-08-14 21:08:59.925] HFA : Sending OP_USB_INIT with GWQ protocol specified
 [2015-08-14 21:09:00.384] Succeeded delayed connect
 [2015-08-14 21:09:00.426] HFA0: HFClearRead (amt=0 err=-7 ern=25)
 [2015-08-14 21:09:00.927] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2015-08-14 21:09:00.928] Selecting pool 0 for work
 [2015-08-14 21:09:00.929] Generated stratum merkle 2c95278519de4751ce18bfa06d8cbc462ca384362ba4ef870a8ad9708477a205
 [2015-08-14 21:09:00.929] Generated stratum header
 [2015-08-14 21:09:00.934] Pushing work from pool 0 to hash queue
 [2015-08-14 21:09:01.428] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2015-08-14 21:09:01.928] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2015-08-14 21:09:02.376] USB: HFA0 read1 buffering 32 extra bytes
 [2015-08-14 21:09:02.376] HFA : Good reply to OP_USB_INIT
 [2015-08-14 21:09:02.376] HFA : OP_USB_INIT: 0 die in chain, 0 cores, device_type 0, refclk 25 Mhz
 [2015-08-14 21:09:02.377] USB: HFA0 read1 buffering 16 extra bytes
 [2015-08-14 21:09:02.377] HFA :      firmware_rev:    0.4
 [2015-08-14 21:09:02.377] HFA :      hardware_rev:    1.1
 [2015-08-14 21:09:02.381] HFA :      serial number:   00000000
 [2015-08-14 21:09:02.381] HFA :      hash clockrate:  0 Mhz
 [2015-08-14 21:09:02.382] HFA :      inflight_target: 0
 [2015-08-14 21:09:02.383] HFA :      sequence_modulus: 0
 [2015-08-14 21:09:02.392] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3261
 [2015-08-14 21:09:02.400] HFA : OP_USB_INIT failed! Operation status 1 (Reset timeout)
 [2015-08-14 21:09:02.402] HFA : Sending OP_WORK_RESTART frame
 [2015-08-14 21:09:02.413] HFA : Sending OP_USB_SHUTDOWN frame
 [2015-08-14 21:09:02.937] Discarded work
 [2015-08-14 21:09:02.937] Selecting pool 0 for work
 [2015-08-14 21:09:02.939] Pushing work from pool 0 to hash queue
 [2015-08-14 21:09:03.414] USB release HFA0
 [2015-08-14 21:09:03.414] USB uninit HFA0
 [2015-08-14 21:09:03.415] USB free HFA
 [2015-08-14 21:09:03.415] USB unlock Hashfast 1-14
 [2015-08-14 21:09:03.415] RES: Hashfast (1:14) lock=0
 [2015-08-14 21:09:03.416] USB res unlock Hashfast 1-14
87  Local / Market / Re: Cumpar doua S3/S3+ ofer 550 lei pe bucata. on: August 12, 2015, 05:20:27 PM
https://bitcointalk.org/index.php?topic=1151079.msg12120823#msg12120823
88  Local / Market / [VANDUT]Antminer S3+ on: August 12, 2015, 10:21:59 AM
Se vinde Antminer S3 capabil de overclock pana in 500Ghs

Pret 500 lei + transport
Negociabil

Imagini



Pasta a fost schimbata.
89  Economy / Computer hardware / Re: [CLOSE/FOUND] S1/S3 Controller Board on: August 11, 2015, 05:28:40 PM
Dude youre getting off topic, i was going to pay but not 50$.
I got two S1 controllers for 13$... give me a break with the 50$ for a damn controller.

Someone close the thread.
90  Economy / Computer hardware / Re: [CLOSE/FOUND] S1/S3 Controller Board on: August 11, 2015, 05:22:52 PM
Try being human.
I found 2 S1 controllers from Serbia for 0.05 shipped.

The PHY modules on S1 and S3 are the same so if you have some skills you can swap them if you have a dead S3 controller.
91  Economy / Computer hardware / Re: [WTB] S1/S3 Controller Board on: August 11, 2015, 04:32:13 PM
Being from a less developed country than yours doesnt make me stupid.
Selling at the same(or almost) price as bitmain a product used is just wrong.
Being snug and cocky doesnt help either.

Peace.
92  Economy / Computer hardware / Re: [WTB] S1/S3 Controller Board on: August 11, 2015, 04:17:23 PM
50$+shipping, bitmain offered me the same price Smiley
Half it and ill consider it.

Thanks.
93  Local / Market / Re: [VAND]Antminer S2/Kit on: August 11, 2015, 03:56:25 PM
Vandut, se poate inchide. Multumesc.
94  Economy / Computer hardware / Re: [WTB] S1/S3 Controller Board on: August 11, 2015, 03:55:18 PM
bumps, i can offer an S2 controller+backplane as trade.
95  Local / Market / Re: [VAND] BitFury Rig 440ghs on: August 11, 2015, 03:53:27 PM
Vandut. Se poate inchide. Multumesc.
96  Bitcoin / Mining support / Re: Antminer s2 No longer showing fans or blades and no longer hash? on: August 11, 2015, 03:46:34 PM
The thermal paste applied on those s2 blades is crapy at best.
I redid them all and the temps are the a bit lower and you can be sure there are no hotspots.
Try that.

Or i have a spare controll+backplane.
Tested and working with all blades on.

PM if intrested.

Im intrested in an S1 or S3 controller if someone has one.
97  Economy / Computer hardware / Re: WTB - 2GB Stick of DDR2-667 200pin 1.5V SO-DIMM RAM on: August 06, 2015, 09:25:14 AM
I have one, where are you from?
98  Local / Market / Re: [VAND]Antminer S2/Kit on: August 02, 2015, 08:53:27 PM
You want fries with that?  Grin
99  Local / Market / [VAND]Antminer S2/Kit on: August 02, 2015, 04:43:32 AM
Se vinde 1 bucata Antminer S2 cu carcasa facuta de mine sau kit.
Kitul contine Backplane+Controller Board+10 Hashing boards.

In cazul in care se trimite in tara cu tot cu carcasa, Hashing boards vor fi transportate intr-o alta cutie pentru a evita deteriorarea lor datorita transportului.

Pret 0.7 btc - Kit sau 800 Ron
       0.9 btc - Carcasa+sursa+kit sau 1000 Ron

Transportul nu este inclus.

100  Economy / Computer hardware / Re: [WTT] Antminer s3/s3+ & HF Yoli (pics added) on: July 31, 2015, 07:44:17 AM
I have about 600ghs +-50ghs worth of v1.1 and v2 bitfury cards + the corespondet m-boards, id be intrested in the yoli board.
Due to being in Europe i would be willing to send them and take the yoli without the water cooler as it is heavy and not worth the trip.
Tell me what you think.

EDIT: Also 1 full antminer S2 kit for the yoli board but including the cooler this time.
Pages: « 1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 »
Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!