 Show Posts
|
|
Pages: [1]
|
|
I just made it to the post office today to get my awaiting packages. When I opened the one from graymatter, I was shocked! The 3 monarchs I received looked they had never been used, Spotless, no dust, no wear and tear. Not even a scratch. Packaging was great, no box damage. I might end up getting some more once I get settled into my new place and the internet people get their s*** together and drop a pole so I can actually use these.
A+
|
|
|
|
|
Can you please post a link/pic with your username and date with the machine. After this I might consider making the 4hr trip.
|
|
|
|
|
Good morning /afternoon!
My last wireless router was a Dlink gaming router, I think 10 years old?! I'm feeling quite lazy today, and would prefer to hear some suggestions on what routers I should be looking at. Things have changed quite a bit since I bought my last router, I actually prefer no WIFI, but since I move to pretty much a dead cell zone, wifi is required. Any suggestions would be greatly appreciated!
Thanks for taking the time to look.
|
|
|
|
|
I took advantage of this deal! B was extremely helpful with an address hiccup on my end. Where I live, the electricity is cheap enough for these to still turn a small profit.
|
|
|
|
|
Thank you both for the reply! I have contacted mindtrip to see if we can work something out.
|
|
|
|
Which is favourable to mine with GekkoScience 2Pac BM1384 Stickminer? Bitcoin or Peercoin ?
I started to mine from yesterday and I have now a credit of 0.00706137 (Peer coins) kinda like 2 cents for 24 hours.....
Should I switch to bitcoin? Or stay with peercoin?
i have mine, compacs not 2pacs, on zpool indirectly mining verge (xvg) i have a feeling this coin is going to take off in the next few months.. altho currently zpools diff seems to be broken and is stuck at the max so they dont produce many shares. I have been trying to figure out how to get my 2pacs to work on zpool, all I ever get is stratum requested restart. Then it disconnects. Are you willing to share your secret? the diff is too high so they disconnect all the time, but they still submit shares.. ? I will throw them back on and give it some more time, guess I got worried something would break. maybe I can see it accept some shares. |
|
|
|
Which is favourable to mine with GekkoScience 2Pac BM1384 Stickminer? Bitcoin or Peercoin ?
I started to mine from yesterday and I have now a credit of 0.00706137 (Peer coins) kinda like 2 cents for 24 hours.....
Should I switch to bitcoin? Or stay with peercoin?
i have mine, compacs not 2pacs, on zpool indirectly mining verge (xvg) i have a feeling this coin is going to take off in the next few months.. altho currently zpools diff seems to be broken and is stuck at the max so they dont produce many shares. I have been trying to figure out how to get my 2pacs to work on zpool, all I ever get is stratum requested restart. Then it disconnects. Are you willing to share your secret? |
|
|
|
|
I would like to pay cash and do a local pick up. I would like to get one at a FAIR price. I'm really not looking to pay a stupidly inflated price. I'm located in Kerrville TX, about an hour away from San Antonio. Please let me know if you might be wanting to get rid of one. I'm on the forums quite often as I'm still learning.
Thanks for taking the time to look at this.
|
|
|
|
Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.
./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200
I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.
If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.
Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn. I do get that, I guess I will have to wait till I get some better hardware. Thanks for the prompt reply. |
|
|
|
|
Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.
./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200
I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.
If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.
|
|
|
|
|
Thank you, I will move it promptly.
|
|
|
|
|
I'm new, been a stalker of the boards for a while now. Learned alot, Thank you everyone for the information!
Can you run the Futurebit Moonlander 2 and the Gekkoscience 2pac on the same hub? I know all about the hubs, power requirements, etc. Spent hours reading all the associated threads. Attempting this would also require running the associated programs, Bfgminer and cgminer, is it possible/advisable to run both on the same machine? I'm asking this because I would prefer not to have multiple hubs and a wiring nightmare from Hades.
If this doesn't belong in the beginner/newbie playground, then please say so and I will rewrite it in the correct section.
Thank you for your time.
*edited title for clarification*
|
|
|
|
|
