Hello, its working fine for me, Temperatures are:

Temps (Chips 2) 80 76 77

I have other antminer S9 in the same room 82 81 79 and just realized it was auto-Fan, so I changed to Manual and set 70% and its now down 10 C° more.

Let me know how it worked for you.

Try using Firefox, same command, FN+F12, in the console to find the string you can click Ctrl+F to find i allways look the word FAN, and work from there.

The miner must be on and connected to the local network.

Please let me know if it worked.

GR:

Excellent! hope it helped.

What browser are you using?

If you have a 3 phase circuit i suggest you take the advantage of using the 220V configuration, the cable you have to use is a lower AWG thant in 110V bacause you devide the Ampacity of the cables by 2 when you are using 2 phases and 3 on 3 phases circuit.

The cables stay at lower temperatures and the degradation will be 0%.

The electrician must be able to distribute equaly the charges in the circuit and you may configure 1 S9 + 1 L3 in a single outlet, at 2100 amps @ 220V = only 9 amps per phase.

Use dryer outlets so there are no hot spots in all your circuit!.

If any questions please ask.

Regards,

Guillermo.

I'm sorry that is way off my knowlegde, but I will ask a friend programmer who maybe know.

Regards.

GRIVERO1983

Very Interesting, thanks for sharing, could you post the page print of that mod. I wasn't sure to mess with the freq. because all my all my miners are autotune.

When you set the freq to xxx MHZ does the 3 boards set to the same fqcy?

Thanks.

GRIVERO

Please also delete the following line, then the options will appear in the panel.

https://eximmagazine.files.wordpress.com/2018/01/nueva-imagen.jpg

Let me know if it worked.

Regards.

Hello have you followed the proceedures on the images i published ? you have first to modify the html code in the miner configuration window when the % appears yoy put the number and then click save in order to save the changes.

Regards,

GRivero1983

It wont disable the autotune mode. Just enable in the hidden funtions of the fan control and leave the freq just as it is.

Regards.

Grivero1983

As a precaution, always do this porcedures at your own risk.

Hey guys, just find a solution for this issue that was driving me insane like a lot of people with the same problem.
I have two Antminer S9, one is 13.0 TH and one is 13.5 TH, both are Autofreq, the issue at hand is that the miner goes up 100% maximum RPM on both fans every 10-20 seconds, and that its really anoying specially with those with miners at home. I just figured out a solution taking a tread with the Antminers S7 that gave me the same solution when i needed to shut down the beep when the internet was down!, for those who had S7's you could notice that this beep was anoying from hell!. But some guy found the solution to shut down the beep by modifying the HTML code in the browser, No linux, no programming, just FN+F12 and follow some steps and the secret menu options will display. Just like the old miners S5, S7 that had this options.

Let's start!

First open your browser in this example i will use Firefox.










If you need further help, please let me know.

If you find my post interesting and solved your issue consider donating, the amount its not important just to know you are gratefull it's fine for me.
BTC: 1FV1t9cKq3pybtGojprV6K1P8oshA5yDpe

Regards.

Grivero1983

Hello, I have an Antminer D3 with a few issues,

I have installed the Firmware uptade from Blissz, and it works very well for what maybe i need to resolve the issue I have.

1) As you can see in the below image, the Antminer dosen't show the Chain #2  but the hashrate is working ok, so the hash board it's working, buy it seems to have a similar issue of the antminers L3+when the miner dosen't show the boards because they were wrongly flashed with other software.

2) Sometimes I get 55 ASICS in the chains, and thousands of HW errors.

3) When I upgrade the firmware (blissz's or bitmain's) for sometimes the missing hasboard appears but if i need to reboot the HBoard desapears.



Any thougths about this issue?

###################################here is the Kernel Log.################################

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238540k/238540k available, 23604k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015438] pid_max: default: 32768 minimum: 301
[    0.015670] Security Framework initialized
[    0.015765] Mount-cache hash table entries: 512
[    0.024596] Initializing cgroup subsys cpuacct
[    0.024629] Initializing cgroup subsys memory
[    0.024693] Initializing cgroup subsys blkio
[    0.024831] CPU: Testing write buffer coherency: ok
[    0.025404] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025481] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026809] Brought up 1 CPUs
[    0.026834] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028127] devtmpfs: initialized
[    0.092510] pinctrl core: initialized pinctrl subsystem
[    0.092723] rstctl core: initialized rstctl subsystem
[    0.093214] regulator-dummy: no parameters
[    0.093784] NET: Registered protocol family 16
[    0.094490] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104156] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104338] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105436] platform 49000000.edma: alias fck already exists
[    0.105471] platform 49000000.edma: alias fck already exists
[    0.105499] platform 49000000.edma: alias fck already exists
[    0.106651] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106833] OMAP GPIO hardware version 0.1
[    0.108241] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109563] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110873] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111502] of_get_named_gpio_flags exited with status 52
[    0.111534] gpio-rctrl rstctl.3: loaded OK
[    0.116633] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119847] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122037] cpsw.0: No hwaddr in dt. Using 50:33:8b:0a:5b:0d from efuse
[    0.122069] cpsw.1: No hwaddr in dt. Using 50:33:8b:0a:5b:0f from efuse
[    0.137624] bio: create slab <bio-0> at 0
[    0.149757] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149995] of_get_named_gpio_flags: can't parse gpios property
[    0.150288] vmmcsd_fixed: 3300 mV
[    0.153406] SCSI subsystem initialized
[    0.153863] usbcore: registered new interface driver usbfs
[    0.153977] usbcore: registered new interface driver hub
[    0.154316] usbcore: registered new device driver usb
[    0.156427] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156462] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156657] media: Linux media interface: v0.10
[    0.156753] Linux video capture interface: v2.00
[    0.156867] pps_core: LinuxPPS API ver. 1 registered
[    0.156883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157605] Advanced Linux Sound Architecture Driver Initialized.
[    0.158799] Switching to clocksource gp_timer
[    0.176796] NET: Registered protocol family 2
[    0.177788] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177878] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177967] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178059] TCP: reno registered
[    0.178085] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178131] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178623] NET: Registered protocol family 1
[    0.179214] RPC: Registered named UNIX socket transport module.
[    0.179235] RPC: Registered udp transport module.
[    0.179248] RPC: Registered tcp transport module.
[    0.179262] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179651] Trying to unpack rootfs image as initramfs...
[    1.966635] Freeing initrd memory: 12376K
[    1.967321] CPU PMU: probing PMU on CPU 0
[    1.967355] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.967967] omap2_mbox_probe: platform not supported
[    1.971825] VFS: Disk quotas dquot_6.5.2
[    1.972063] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.973462] NFS: Registering the id_resolver key type
[    1.973581] Key type id_resolver registered
[    1.973599] Key type id_legacy registered
[    1.973668] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.974105] msgmni has been set to 490
[    1.976892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.976918] io scheduler noop registered
[    1.976935] io scheduler deadline registered
[    1.976991] io scheduler cfq registered (default)
[    1.980921] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.983536] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.983817] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.644583] console [ttyO0] enabled
[    2.649170] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.657832] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.666480] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.675135] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.684114] [drm] Initialized drm 1.1.0 20060810
[    2.702790] brd: module loaded
[    2.713033] loop: module loaded
[    2.717218] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.727169] nand_get_flash_type: 2c,da against 2c,da
[    2.732704] ONFI param page 0 valid
[    2.736378] ONFI flash detected
[    2.739698] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.751609] omap2-nand: detected x8 NAND flash
[    2.756275] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.761858] omap2-nand: using custom ecc layout
[    2.766700] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.773094] Creating 10 MTD partitions on "omap2-nand.0":
[    2.778771] 0x000000000000-0x000000020000 : "spl"
[    2.785565] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.793009] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.800441] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.807845] 0x000000080000-0x000000240000 : "u-boot"
[    2.816094] 0x000000240000-0x000000260000 : "bootenv"
[    2.823028] 0x000000260000-0x000000280000 : "fdt"
[    2.829670] 0x000000280000-0x000000780000 : "kernel"
[    2.840695] 0x000000800000-0x000001c00000 : "root"
[    2.864211] 0x000001c00000-0x000003000000 : "config"
[    2.888001] OneNAND driver initializing
[    2.893745] usbcore: registered new interface driver asix
[    2.899559] usbcore: registered new interface driver cdc_ether
[    2.905803] usbcore: registered new interface driver smsc95xx
[    2.911921] usbcore: registered new interface driver net1080
[    2.917946] usbcore: registered new interface driver cdc_subset
[    2.924240] usbcore: registered new interface driver zaurus
[    2.930247] usbcore: registered new interface driver cdc_ncm
[    2.937011] usbcore: registered new interface driver cdc_acm
[    2.942971] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.951349] Initializing USB Mass Storage driver...
[    2.956591] usbcore: registered new interface driver usb-storage
[    2.962891] USB Mass Storage support registered.
[    2.967934] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.974645] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.979893] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.988666] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.988688] musb-hdrc: MHDRC RTL version 2.0
[    2.988703] musb-hdrc: setup fifo_mode 4
[    2.988731] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.988880] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.993924] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.999942] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    3.005212] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    3.014191] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.014215] musb-hdrc: MHDRC RTL version 2.0
[    3.014229] musb-hdrc: setup fifo_mode 4
[    3.014252] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.014445] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    3.019490] musb-hdrc musb-hdrc.1.auto: *** power=250
[    3.024799] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.031202] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.039448] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.039552] usb usb1: default language 0x0409
[    3.039611] usb usb1: udev 1, busnum 1, minor = 0
[    3.039635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.046764] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.054336] usb usb1: Product: MUSB HDRC host driver
[    3.059551] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.065218] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.071230] usb usb1: usb_probe_device
[    3.071258] usb usb1: configuration #1 chosen from 1 choice
[    3.071323] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.071524] hub 1-0:1.0: usb_probe_interface
[    3.071546] hub 1-0:1.0: usb_probe_interface - got id
[    3.071574] hub 1-0:1.0: USB hub found
[    3.075570] hub 1-0:1.0: 1 port detected
[    3.079707] hub 1-0:1.0: standalone hub
[    3.079727] hub 1-0:1.0: individual port power switching
[    3.079745] hub 1-0:1.0: no over-current protection
[    3.079763] hub 1-0:1.0: Single TT
[    3.079784] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.079803] hub 1-0:1.0: power on to power good time: 10ms
[    3.079861] hub 1-0:1.0: local power source is good
[    3.079976] hub 1-0:1.0: enabling power on all ports
[    3.081085] mousedev: PS/2 mouse device common for all mice
[    3.089017] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.096502] 44e3e000.rtc: already running
[    3.101002] i2c /dev entries driver
[    3.106002] pps_ldisc: PPS line discipline registered
[    3.111489] Driver for 1-wire Dallas network protocol.
[    3.118769] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.126332] cpuidle: using governor ladder
[    3.130661] cpuidle: using governor menu
[    3.135233] of_get_named_gpio_flags exited with status 6
[    3.135253] of_get_named_gpio_flags: can't parse gpios property
[    3.135269] of_get_named_gpio_flags: can't parse gpios property
[    3.135305] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.142528] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.149379] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.156596] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.163913] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.170906] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.180510] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.204423] of_get_named_gpio_flags exited with status -517
[    3.204489] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.212273] ledtrig-cpu: registered to indicate activity on CPUs
[    3.219053] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.226247] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.234413] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.240711] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.247891] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.260170] usbcore: registered new interface driver usbhid
[    3.266088] usbhid: USB HID core driver
[    3.272979] TCP: cubic registered
[    3.276505] Initializing XFRM netlink socket
[    3.281084] NET: Registered protocol family 17
[    3.285934] NET: Registered protocol family 15
[    3.290784] Key type dns_resolver registered
[    3.295426] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.303537] ThumbEE CPU extension supported.
[    3.308047] Registering SWP/SWPB emulation handler
[    3.314056] registered taskstats version 1
[    3.320687] of_get_named_gpio_flags exited with status -517
[    3.320760] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.377706] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.384120] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.398633] libphy: 4a101000.mdio: probed
[    3.402947] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.413178] Detected MACID = 50:33:8b:0a:5b:0d
[    3.417857] cpsw 4a100000.ethernet: NAPI disabled
[    3.423250] of_get_named_gpio_flags exited with status -517
[    3.423316] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.432037] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.441322] cpu0 supply cpu0 not found, using dummy regulator
[    3.447811] cpufreq_cpu0: failed to scale voltage up: -22
[    3.453630] cpufreq_cpu0: failed to scale voltage up: -22
[    3.466428] ALSA device list:
[    3.469661]   No soundcards found.
[    3.474240] Freeing init memory: 264K
[    3.478299] Failed to execute /init
[    4.444951] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.756297] net eth0: initializing cpsw version 1.12 (0)
[    5.765249] net eth0: phy found : id is : 0x7c0f1
[    5.770730] libphy: PHY 4a101000.mdio:01 not found
[    5.775934] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.841118] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 25 22:31:27 (none) local0.err cgminer: Invalid config option --bitmain-fan-pwm: '' is not a number
Dec 25 22:31:27 (none) local0.err cgminer: Miner compile time: Sat Dec 10 22:11:56 CST 2017 type: Antminer D3 Blissz v1.12
Dec 25 22:31:27 (none) local0.warn cgminer: Started cgminer 4.10.0
Dec 25 22:31:27 (none) local0.warn cgminer: Error in configuration file, partially loaded.
Dec 25 22:31:27 (none) local0.warn cgminer[362]: bitmain_DASH_init
Dec 25 22:31:27 (none) local0.warn cgminer[362]: check_fan_speed OK
Dec 25 22:31:27 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio51/value  chain 0
Dec 25 22:31:27 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio48/value  chain 1
Dec 25 22:31:27 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio47/value  chain 2
Dec 25 22:31:27 (none) local0.notice cgminer[362]: detect total chain num 3
Dec 25 22:31:27 (none) local0.notice cgminer[362]: i2c init ok
Dec 25 22:31:27 (none) local0.notice cgminer[362]: check_whether_need_update_pic_program
Dec 25 22:31:29 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:29 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:30 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 25 22:31:32 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:32 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:33 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 25 22:31:35 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:35 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:36 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 25 22:31:36 (none) local0.notice cgminer[362]: every_chain_reset_PIC16F1704_pic_new
Dec 25 22:31:38 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:40 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:41 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 25 22:31:41 (none) local0.notice cgminer[362]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 25 22:31:42 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:43 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:43 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 25 22:31:43 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 25 22:31:43 (none) local0.notice cgminer[362]: pic_heart_beat_func_new
Dec 25 22:31:43 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 25 22:31:44 (none) local0.notice cgminer[362]: tty_init
Dec 25 22:31:44 (none) local0.notice cgminer[362]: tty_init chainid = 0
Dec 25 22:31:44 (none) local0.err cgminer[362]: create rx read thread for /dev/ttyO1 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[0]
Dec 25 22:31:44 (none) local0.err cgminer[362]: create tx read thread for /dev/ttyO1 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: tty_init chainid = 1
Dec 25 22:31:44 (none) local0.err cgminer[362]: create rx read thread for /dev/ttyO2 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[1]
Dec 25 22:31:44 (none) local0.err cgminer[362]: create tx read thread for /dev/ttyO2 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: tty_init chainid = 2
Dec 25 22:31:44 (none) local0.err cgminer[362]: create rx read thread for /dev/ttyO4 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[2]
Dec 25 22:31:44 (none) local0.err cgminer[362]: create tx read thread for /dev/ttyO4 ok
Dec 25 22:31:44 (none) local0.notice cgminer[362]: open device over
Dec 25 22:31:44 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 25 22:31:45 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 25 22:31:45 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 0 ASICs
Dec 25 22:31:45 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 55 ASICs
Dec 25 22:31:45 (none) local0.notice cgminer[362]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 25 22:31:47 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 25 22:31:47 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:47 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:47 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:47 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 25 22:31:47 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 25 22:31:47 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 541
Dec 25 22:31:47 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 542
Dec 25 22:31:48 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 25 22:31:48 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 0 ASICs
Dec 25 22:31:48 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 496
Dec 25 22:31:48 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 497
Dec 25 22:31:48 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 55 ASICs
Dec 25 22:31:48 (none) local0.notice cgminer[362]: recheck_asic_num DONE!
Dec 25 22:31:48 (none) local0.notice cgminer[362]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 25 22:31:49 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 25 22:31:50 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:50 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:50 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:50 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 25 22:31:50 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 25 22:31:50 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1083
Dec 25 22:31:50 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1084
Dec 25 22:31:50 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1085
Dec 25 22:31:50 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 25 22:31:50 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 0 ASICs
Dec 25 22:31:51 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 993
Dec 25 22:31:51 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 994
Dec 25 22:31:51 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 55 ASICs
Dec 25 22:31:51 (none) local0.notice cgminer[362]: recheck_asic_num DONE!
Dec 25 22:31:51 (none) local0.notice cgminer[362]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 25 22:31:52 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 25 22:31:52 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:52 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:52 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 25 22:31:53 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 25 22:31:53 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 25 22:31:53 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1626
Dec 25 22:31:53 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1627
Dec 25 22:31:53 (none) local0.err cgminer[362]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1628
Dec 25 22:31:53 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 25 22:31:53 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 0 ASICs
Dec 25 22:31:53 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1490
Dec 25 22:31:53 (none) local0.err cgminer[362]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1491
Dec 25 22:31:53 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 55 ASICs
Dec 25 22:31:53 (none) local0.notice cgminer[362]: recheck_asic_num DONE!
Dec 25 22:31:53 (none) local0.notice cgminer[362]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 25 22:31:53 (none) local0.notice cgminer[362]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 25 22:31:53 (none) local0.notice cgminer[362]: set_ticket_mask ticket_mask = 0x0000001b
Dec 25 22:31:54 (none) local0.notice cgminer[362]: set_frequency: frequency = 525
Dec 25 22:31:54 (none) local0.notice cgminer[362]: set_frequency: frequency = 525
Dec 25 22:31:54 (none) local0.notice cgminer[362]: set_frequency: frequency = 525
Dec 25 22:31:54 (none) local0.notice cgminer[362]: set_frequency: frequency = 525
Dec 25 22:31:54 (none) local0.notice cgminer[362]: software_set_address: chain 0 has 60 ASIC, and addrInterval is 1
Dec 25 22:31:54 (none) local0.notice cgminer[362]: Now Set

• Chain Address

Dec 25 22:31:54 (none) local0.notice cgminer[362]: software_set_address: chain 1 has 0 ASIC, and addrInterval is 1
Dec 25 22:31:54 (none) local0.notice cgminer[362]: Now Set [1] Chain Address
Dec 25 22:31:55 (none) local0.notice cgminer[362]: software_set_address: chain 2 has 55 ASIC, and addrInterval is 1
Dec 25 22:31:55 (none) local0.notice cgminer[362]: Now Set [2] Chain Address
Dec 25 22:31:56 (none) local0.notice cgminer[362]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Dec 25 22:31:56 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Dec 25 22:31:56 (none) local0.notice cgminer[362]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 25 22:31:58 (none) local0.warn cgminer[362]: set_temperature_offset_value
Dec 25 22:31:59 (none) local0.notice cgminer[362]: set_temperature_offset_value: Chain0 Sensor0 temp offset : -4,
Dec 25 22:32:00 (none) local0.notice cgminer[362]: set_temperature_offset_value: Chain1 Sensor0 temp offset : 00,
Dec 25 22:32:00 (none) local0.notice cgminer[362]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -3,
Dec 25 22:32:00 (none) local0.notice cgminer[362]: frequency = '525'
Dec 25 22:32:00 (none) local0.notice cgminer[362]: dev.timeout = 575208 us
Dec 25 22:32:00 (none) local0.notice cgminer[362]: open_core
Dec 25 22:32:01 (none) local0.err cgminer[362]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1
Dec 25 22:32:01 (none) local0.err cgminer[362]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 2
Dec 25 22:32:01 (none) local0.err cgminer[362]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 3
Dec 25 22:32:04 (none) local0.err cgminer[362]: low hashrate detection trigger: 16518.600000 Gh/s
Dec 25 22:32:04 (none) local0.notice cgminer[362]: set voltage = 1381.503211  real:125 mv
Dec 25 22:32:04 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0x91
Dec 25 22:32:05 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0x91
Dec 25 22:32:05 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0x91
Dec 25 22:32:05 (none) local0.err cgminer[362]: cgminer time error total_secs = 1514241125.683034 last_total_secs = 1.000000
Dec 25 22:32:05 (none) local0.warn cgminer[362]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Dec 25 22:32:06 (none) local0.err cgminer[362]: WTF No pool 3 found!
Dec 25 22:32:06 (none) local0.err cgminer[362]: WTF No pool 3 found!
Dec 25 22:32:06 (none) local0.err cgminer[362]: D1 0: work 7f not find error
Dec 25 22:32:06 (none) local0.err cgminer[362]: D1 0: work 7f not find error
Dec 25 22:32:07 (none) local0.warn cgminer[362]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Dec 25 22:32:07 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Dec 25 22:32:11 (none) local0.warn cgminer[362]: API running in IP access mode on port 4028 (15)
Dec 25 22:33:30 (none) local0.warn cgminer[362]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9991
Dec 25 22:34:05 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12239.538086]
Dec 25 22:35:20 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Dec 25 22:52:21 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12215.642578]
Dec 25 23:02:33 (none) local0.warn cgminer[362]: reg fifo is full !!
Dec 25 23:04:32 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12340.186523]
Dec 25 23:06:34 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12180.740234]
Dec 25 23:12:39 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12331.483398]
Dec 25 23:20:46 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12948.558594]
Dec 25 23:28:53 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [6448.900391]
Dec 25 23:29:28 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:29:33 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:29:38 (none) local0.warn cgminer[362]: Lost 2 shares due to no stratum share response from pool 0
Dec 25 23:29:48 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:30:03 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:30:08 (none) local0.warn cgminer[362]: Lost 2 shares due to no stratum share response from pool 0
Dec 25 23:30:14 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:30:29 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:33:49 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:33:54 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:34:14 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:34:54 (none) local0.warn cgminer[362]: Lost 1 shares due to no stratum share response from pool 0
Dec 25 23:34:58 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12276.583984]
Dec 25 23:43:06 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12199.512695]
Dec 25 23:45:08 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12264.665039]
Dec 25 23:53:15 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12232.121094]
Dec 26 00:09:31 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [16518.600000], real: [12218.908203]