 Show Posts
|
|
Pages: [1] 2 »
|
|
Καλησπερα.
Ψαχνω αναλογη υπηρεσία παο Κινα.
Αν ειναι και Ελληνας ακομα καλυτερα.
Εχει καποιος απο εδω να μου συστησει ανθρώπους με τους οποιους εχετε κανει ηδη συναλλαγες;
Ευχαριστώ!
|
|
|
|
|
So im using the latest t-rex version and just downloaded the latest nvidia drivers.
I have a rig with 8 msi suprim 3070' non lhr cards
Worked like a charm so far. The last couple of days suddenly one of the gpus stopped being detected.In windows device manager it appeared with a yellow exclamation mark and would not in neither in atterburner nor in t-rex
I reinstalled drivers using ddu and updated afterburner.
Card is detected in device manager just fine but not in afterburner or the miner.
Any ideas what could be the problem here?
|
|
|
|
|
Also on my rx580's setups i never plugged the sata pow and got up to 10x cards detected and working..
Make sure when you re plugging your risers to do so in and order per one.
For example first plug the black slot. Boot windows and check everything..
Then start with the white slots one at a time..boot windows check..
If that works proceed like that until all your cards are detected.
Also. For the 13x setup you need 5x nvidia mining only cards and i think will only work with linux based OS.
|
|
|
|
Any info on why my rig restarts after i install a 4th card?
Miner starts no problem. And from what i have seen in the log there are no errors.
PC just goes off and powers on again cause i have that bios setting.
If it is a power issue what would that be? I have tried 3 different psu's even dual psu setup.
Any help would be much appreciated!
Are the cards directly in the Mobo or on risers? Tell us more about the setup....maybe we can provide an answer. All the cards are connected via risers. I have tried the same risers with some others cards. (Vega's - 3080's) and they worked fine. I have the risers connected either with sata or molex cables..also 2 cards per sata/molex ribbon. I have started with 6x aorus cards..switched with couple xfxs in case the problem was with some of the aorus..but the same thing happens. I ve added lidag 3 and gser 3 commands.. that didnt help.. |
|
|
|
|
Ποσταρω εδω μηπως βρω καμια βοηθεια απο το ελληνικο community.
Εχω στησει λοιπον ενα rig με 6 καρτες rx580.
H mobo ειναι η Asus z270 prime-a. Εχει 7 pci e slot αλλα υποστηριζει μεχρι και 8 καρτες μεσω των m.2 slots..
Αδιαφορο προς το παρον αφου ετσι και αλλιως εχω μονο εξι καρτες διαθεσιμες.
Το τροφοδοτικο μου ειναι 1200αρι platinum
Ολα κομπλε στημενα. Φαινονται ολες οι καρτες στα windows 10. Φλασαρισμενες με mining bios.
Το προβλημα εμφανιζεται οταν ξεκιναει ο miner (phoenix, tmr, lolminer).
To rig κανει restart οταν οι miner συμπληρωνουν το dag και οι καρτες πιανουν 30αρες..
Εχω δοκιμασει αλλα τροφοδοτικα και αλλη μητρική. Εχω αλλαξει και 2 καρτες..το rig δουλευει μεχρι με 3 καρτες..οταν κουμπωνω την 4η και ξεκιναω τον miner..τρωω restart..
|
|
|
|
|
Καλησπερα..
Γενικα υπαρχει πολυς κοσμος που ασχολειται με τα crypto που ομως δεν γνωριζει το συγκεκριμενο φορουμ.
Οσοι εχετε μπει απ το 2013-2014..
Σας ζηλευω ×D
|
|
|
|
|
Any info on why my rig restarts after i install a 4th card?
Miner starts no problem. And from what i have seen in the log there are no errors.
PC just goes off and powers on again cause i have that bios setting.
If it is a power issue what would that be? I have tried 3 different psu's even dual psu setup.
Any help would be much appreciated!
|
|
|
|
Running a eig with 6× rx580's aorus on the Asus prime 270-a and after managing to detect all 6 cards i get a restart everytime i start the miner.
No error message. It justs restarts after 15 seconds of running the miner..
I have changed risers and psu's. Switched some cards as well.
Any idea?
Ps: Running the 5.5c version on 20.11.2
If you mean the computer is restarting you got a power problem. Try using the slow dag creation command, maybe all your cards are generating the dag at the same time and activating the PSU failsafe. How do i do that exactly? I pasted -lidag command in the start miner file but it still restarted when initiating the dag. Seems like a power issue yes but i cant figure exactly what. I have switched psu's as well.. Also.. i know this might not be relevant..i tried using another miner and the pc restarted the same. So if it is a psu failsafe issue how do i configure it in phoenix? Tried to read the instructions but to no avail... Anyone help? I ll be gratefull as im fighting with this all day now.. did you tried 1 by 1 gpus? is it restarst if you run only 1 gpu? you can add this -gpus 1 it will run 1st gpu Yes I did. It works OK with up to 4 cards. Then restarts when 5th and 6th added. My psu's are 1200 platinum. It restarts as if the power is switched off. |
|
|
|
Running a eig with 6× rx580's aorus on the Asus prime 270-a and after managing to detect all 6 cards i get a restart everytime i start the miner.
No error message. It justs restarts after 15 seconds of running the miner..
I have changed risers and psu's. Switched some cards as well.
Any idea?
Ps: Running the 5.5c version on 20.11.2
If you mean the computer is restarting you got a power problem. Try using the slow dag creation command, maybe all your cards are generating the dag at the same time and activating the PSU failsafe. How do i do that exactly? I pasted -lidag command in the start miner file but it still restarted when initiating the dag. Seems like a power issue yes but i cant figure exactly what. I have switched psu's as well.. Also.. i know this might not be relevant..i tried using another miner and the pc restarted the same. So if it is a psu failsafe issue how do i configure it in phoenix? Tried to read the instructions but to no avail... Anyone help? I ll be gratefull as im fighting with this all day now.. |
|
|
|
Running a eig with 6× rx580's aorus on the Asus prime 270-a and after managing to detect all 6 cards i get a restart everytime i start the miner.
No error message. It justs restarts after 15 seconds of running the miner..
I have changed risers and psu's. Switched some cards as well.
Any idea?
Ps: Running the 5.5c version on 20.11.2
If you mean the computer is restarting you got a power problem. Try using the slow dag creation command, maybe all your cards are generating the dag at the same time and activating the PSU failsafe. How do i do that exactly? I pasted -lidag command in the start miner file but it still restarted when initiating the dag. Seems like a power issue yes but i cant figure exactly what. I have switched psu's as well.. |
|
|
|
|
Running a eig with 6× rx580's aorus on the Asus prime 270-a and after managing to detect all 6 cards i get a restart everytime i start the miner.
No error message. It justs restarts after 15 seconds of running the miner..
I have changed risers and psu's. Switched some cards as well.
Any idea?
Ps: Running the 5.5c version on 20.11.2
|
|
|
|
|
Εγω πηγα και αναψα κερακι στην εκκλησία..δοκιμασε το μπορει να βοηθησει..
|
|
|
|
|
Thats a good question i would like to hear an answer to as well..
Also you say that revolut is not the way to go. Why? Have you tried it?
|
|
|
|
|
Ο μονος λογος που χρησιμοποιησα το cryptopia ηταν για το electroneum αλλα κι αυτο ψοφησε νωρις..
Ειχα μερικα coins που δεν καταφερα να μεταφερω τελικα αλλα η αξια παραμενει ακομα τοσο χαμηλη που δεν αξιζει καν να ασχοληθω..
ελπιζω κοσμος που την πατησε να παρει εστω κατι πισω..
|
|
|
|
Πωλείται η παραπάνω κάρτα γραφικών,
Μεταχειρισμενη σε άψογη κατάσταση
Κουτί και παρελκόμενα υπάρχουν.
Εννοείτε κάθε έλεγχος δεκτός!!!!
Τιμη 180€
ΌΧΙ ΠΑΖΑΡΙΑ!!!
Υπαρχει ακομα η καρτα; |
|
|
|
GPU6: Generating DAG for epoch #387
Eth: New job #06735b75 from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
GPU2: DAG 65%
GPU5: DAG 21%
GPU4: DAG 42%
GPU7: Free VRAM: 7.948 GB; used: 0.052 GB
GPU7: Disabling DAG pre-allocation (not enough VRAM)
GPU7: Allocating DAG for epoch #387 (4.02) GB
GPU7: Generating DAG for epoch #387
GPU3: DAG 63%
GPU2: DAG 81%
GPU6: DAG 21%
Eth: New job #7cc46469 from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
GPU5: DAG 41%
GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #387 (4.02) GB
GPU1: Generating DAG for epoch #387
Eth: New job #a67920b6 from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
GPU4: DAG 63%
GPU3: DAG 80%
GPU7: DAG 21%
GPU2: DAG generated in 8.0 s (515.6 MB/s)
GPU2: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU2: clSetKernelArg (-48)
Fatal error detected. Restarting.
Eth: New job #7482ee9b from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
Eth: New job #9bc3aa8e from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
Eth: New job #b84dedd8 from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH
I have that problem, virtual memory in 40.000.
Try to add -gser 2 SAME BRO, same problem you need to find the optimal value for the -gser command for your gpus. Example: PhoenixMiner.exe -pool eth-eu2.nanopool.org:9999 -wal wallet.rig -gser 2 or Perhaps your drivers have been automatically updated. You need to roll back the drivers to the version on which the program works stably. In config.txt add: -rvram -1 And add more virtual memory in windows 16 to 32Go, Me for 6 * RX580 i have 65635Mo virtual memory for no problem Same but i saw this: GPU4: DAG 22% Eth: New job #4b0e9be5 from asia.ethash-hub.miningpoolhub.com:20535; diff: 8589MH GPU3: DAG 65% GPU2: DAG generated in 8.0 s (517.9 MB/s) GPU2: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0) GPU2: clSetKernelArg (-48)
Fatal error detected. Restarting.Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) GPU5: Free VRAM: 7.948 GB; used: 0.052 GB try to add this: PhoenixMiner.exe -pool eth-eu2.nanopool.org:9999 -wal wallet.rx580 -gser 10 -rvram -1 Same problem, delete all and paste what you write and same vram problem, today was working fine, i did not update nothing and stop mining go back and read few post, I had same problem post #7311 ( https://bitcointalk.org/index.php?topic=2647654.msg56049534#msg56049534 ) Also, windows 20.4 with PM 5.4c and AMD 20.11.2 working nice +merit if solved  Got the same problem today. On 3 miners. 2 miners with Rx580's and a 3rd one with Vegas. All of them showing the same not enough vram and gpu1 error. I updated to the latest edition of phoenix but its still the same.. Could this be a drivers or windows update issue? |
|
|
|
|
1000euro + Το ρεύμα ή 1000 καθαρά;
|
|
|
|
|
Πόσο ρεύμα καίνε όλα μαζί;
Έχεις μια εικόνα;
|
|
|
|
|
3k each..
Λογικά θα εννοεί ο φίλος..
|
|
|
|
|
Οτι γράφει ο τίτλος.
Οι κάρτες είναι αγορασμένες Δεκέμβρη, Γενάρη του 17 αρχικά. Στα δικά μου χέρια ήρθαν πριν λίγες μέρες και επειδή δεν χωράνε άλλες στο rig μου και επειδή δεν θέλω να στήσω 2ο πουλάω τρεις κάρτες που μου περισσεύουν.
280 έκαστη.
Έχω κουτιά και αποδείξεις.
Sapphire Rx580 Nitro+ 8gb
Στο rig του προηγούμενου τρέχανε σε ethOS με κομπλέ θερμοκρασίες. Δεν χρειάζεται νομίζω να τα εξηγώ εδώ, δεν είμαστε το ινσομνια))
|
|
|
|
|
