dose this site really sell the products listed?

This is the prototype it is built and is fully working. The one shown is a bit smaller then the final one will be.
The changes that will be made in the final model are seen below

    1.) The white top will be black to mach the paint on the wood.
    2.) The box will be 10 1/2 x 14 x 4 1/2 inches in size vs 10 x 14 x 3 /8 as shown above
    3.) It will have 2 80mm exhaust instead of the 3 50mm on the prototype
    5.) The case will be painted black
    6.) The fanholes will have a fan grill over them

I'm looking to see if their is any interest in this product. before i  submit a listing to sell them.
The price will be $275 USD depending on cost of buying materials.
I may take BTC as while as USD's.

current spec's projected for final product.
   1.) Size (10 1/2 x 14 x 4 1/2) (with x length x height)
   2.) About a 6ft black power cord
   3.) 45 usable usb ports
   4.) 100 mbit/s Ethernet hookup
   5.) Painted black with a black plastic top
   6.) 4 hubs will be hooked up thou a squid hub and 1 hub directly to the Raspberry PI
   7.) Up to 200 watts peek 5v dc output at
   8.) Raspberry PI with minepeon installed will need to be configured for your accounts.

checkout what i have made.
https://bitcointalk.org/index.php?topic=308456.0

bump

It has one now here is a image of it. also Wood burns at 300 C or 575 F

Why is wood a big no?
ref:http://www.tomshardware.com/forum/301607-31-wooden-case
The temp are fine as while. As less then 1% of the heat exchange happens thou the  case. the 99% happen thou the moving of the air thou the case.
As while the wood dampens the noise made by the fans.

I'm planing on building a self contained  mining box that can hold up to 45 of the new bitfury USB miner cards.







This is the prototype it is built and is fully working. The one shown is a bit smaller then the final one will be.
The changes that will be made in the final model are seen below

    1.) The white top will be black to mach the paint on the wood.
    2.) The box will be 10 1/2 x 14 x 4 1/2 inches in size vs 10 x 14 x 3 /8 as shown above
    3.) It will have 2 80mm exhaust instead of the 3 50mm on the prototype
    5.) The case will be painted black
    6.) The fanholes will have a fan grill over them

I'm looking to see if their is any interest in this product. before i  submit a listing to sell them.
If interested in this product please post here.

The price will be $250 to $300 USD depending on cost of buying materials. But at this time its is not set in stone.
I may take BTC as while as USD's.

for the people thinking this is flammable here is some info on that.http://www.engineeringtoolbox.com/wood-combustion-heat-d_372.html.
but in short Wood solids starts to burn (near 575 oF, 300 oC)

current spec's projected for final product.
   1.) Size (10 1/2 x 14 x 4 1/2) (with x length x height)
   2.) About a 6ft black power cord
   3.) 45 usable usb ports
   4.) 100 mbit/s Ethernet hookup
   5.) Painted black with a black plastic top
   6.) 4 hubs will be hooked up thou a squid hub and 1 hub directly to the Raspberry PI
   7.) Up to 200 watts peek 5v dc output at
   8.) Raspberry PI with minepeon installed will need to be configured for your accounts.

I have updated my post to include the current projected costs as follows.

The price will be $250 to $300 USD depending on cost of buying materials. But at this time is not set in stone.

I'm planing on building a self contained  mining box that can hold up to 45 of the new bitfury USB miner cards.





this is the prototype it is built and is fully working. The one shown is a bit smaller then the final one will be.
The changes that will be made in the final model are seen below

• 1.) the white top will be made of smoked translucent plexiglass
• 2.) The box will be 1/2inch wider and up to 2inches  longer and up to 1 and 1/2inches taller
• 3.) it will have 2 80mm exhaust instead of the 3 50mm on the prototype
• 4.) I may have one additional hub giving 54 useable ports
• 5.) the case will be painted black
• 6.) the fanholes will have a fan grill over them

I'm looking to see if their is any interest in this product. before i  submit a listing to sell them.
if interested in this product please post here.

the price will be $250 to $300 USD depending on cost of buying materials. but at this time is not set in stone.

I'm starting a small side business making a wooden box with everything need in it to be a independent mining system. I'm based in the USA. It will be able to  use  USB bitfury miners and hold 45 of them.