Show Posts
|
Pages: [1] 2 »
|
Hi everyone,
As I ordered a couple Obelisk ASICs and don't intend to buy more I'd like to sell my coupons to anyone willing to buy one.
I have 2 coupons worth $250 each (so $500 total). Anyone interested please send me your offer via PM. Direct sales or escrow accepted as you prefer (but any fees are on you).
Coupons for Obelisk ASICS only.
Cheers,
|
|
|
ok let me know in private : what's your offer, where are you based? thanks
|
|
|
Hi, Sell Obelisk SC1, Obelisk DCR1, Antminer L3+ (2 units) Location : France, Montpellier, Make offer thank you
|
|
|
Thanks, I think shield coin (xsh) is a blake2s coin and so not possible to mine with antminer a3. Anything else? thanks
|
|
|
Hello Has someone come up with an alternative to mining siacoin with an antminer a3 since 31st of october? Can Bcx be mined? Thanks
|
|
|
Hi everybody! The collective order buy, which was originally for giant b but ended up being for giant x10 considered the surge in prices of giant b and the dive of crypto at the time of the collective order buy... It was just a 6 units order. Beginning small. Thanks a lot for all who trusted and supported me.I will keep you in touch for future orders as all went great with this order.
|
|
|
Bonjour, J'ai exactement le même soucis de 2eme board qui fonctionne mal (les XXX veulent dire qu'il y a un soucis mais pas que les puces sont dead, sinon ce serait des ---) J'ai essayé reboot, ca ne change rien, j'ai essayé de reflasher le firmware ca ne change rien, et j'ai essayé de débrancher la nappe de la board en question et ca mine a peu pres pareil... Que pensez vous d'essayer de changer le branchement de la nappe de la board qui ne fonctionne pas bien? Cf le branchement sur cette photo: https://framapic.org/5K9fRbkaDfBo/YTfpAo0DRWAl.jpgJ'ai cherché sur internet mais personne ne parle de cette prise supplémentaire sur les antminer et à quoi elle pourrait servir? Merci A+
|
|
|
Hi, BItmain says no warranty if a asic was overclocked. How can they detect if it was overclocked or not? Thank you
|
|
|
Hi, I have a hashing board that seems not working. I tried to reset the A3 and to check the psu wires but it's the same. I'm wondering about this cable pins (see image): https://framapic.org/5K9fRbkaDfBo/YTfpAo0DRWAl.jpgWhat do you think this is? Can I unplug one of the flat cable of the other pins and plug it there to try to fix the hasboard?
|
|
|
Hi everyone, I am wondering this about the future of bitcoin: As we all know, bitcoin network security can only be achieved through a lot of mining machines all around the world. The incentive for miners is to get a reward in bitcoin while they provide hashing power. As bitcoin network is capped to 21 million bitcoin, what will happen when we reach the cap as only a very small inflation is planned to emit new bitcoins then? I mean, what will happen to all these miners who provide a lot of power to secure the network if only a very tiny fraction of bitcoin can be emitted as a reward for them? If miners who need to provide more and more power to secure the bitcoin network get only tiny fractions of bitcoin as reward when we reach the cap, that would mean the price of bitcoin needs to raise a lot to secure the incentive to mine for miners...In other words, at a certain point, if the price of bitcoin is too low, the miners will go away and the bitcoin network will not last. What do you think about that? Thanks for your feedbacks
|
|
|
I'm finally mining.. UPS made it in record timing for me ...(faster than usual anyways) I still had to go 20k out of town to pick it up... because they tried to deliver it at 130PM !! -have these guys heard of deliveries AFTER working hours -ie when people are home? If I didn't go, they were going to 'attempt' to deliver it on Monday. good ol' capital of canuckia.. I cheated the delivery time, by doing this I got an extra £100, maybe it can help you in the future https://youtu.be/K2_W6KqzzgIWhat do you mean "I cheated the delivery time"? Did you do something to get fast delivery? Thanks The delivery date was Thursday 12 PM. I did not want to wait til then so I picked the parcel up on Wednesday 6:30PM and got an extra 14 hours of mining. OK nice, how do you do that? you use "UPS My Choice"? you call them to ask for a anticipated pick up at their facility? did you pay an extra to get earlier delivery?
|
|
|
Thanks a lot for your answers, it's helping. Well now I have another issue, it seems the tab "miner status" doesnt show anything anymore when i click on it... https://framapic.org/YuR729YQcbpc/rheIg0GxNH6m.pngIs it just the pool isnt configured well or something else? I m a bit worried i harmed the miner by putting the frequency to 750. Thanks Go back to your system page and see what it says under hardware version? Probably just your miner configuration settings are wrong? Hi, I have 2 A3 and I have this issue with both : in system/overview/hardware version it says "Socket connect failed: Connection refused" Do you have any idea what i can do? I tried to set nat/pat config in my router to let port 3333 and 20550 go throug but it doesnt change anything. I tried to reset the miner, then it works for some time and get back to " Socket connect failed: Connection refused" Any idea? Thanks a lot! I got this error when i was trying to use MPH. What pool you using? MPH, Luxor, Siamining, eachpool working well now
|
|
|
I'm finally mining.. UPS made it in record timing for me ...(faster than usual anyways) I still had to go 20k out of town to pick it up... because they tried to deliver it at 130PM !! -have these guys heard of deliveries AFTER working hours -ie when people are home? If I didn't go, they were going to 'attempt' to deliver it on Monday. good ol' capital of canuckia.. I cheated the delivery time, by doing this I got an extra £100, maybe it can help you in the future https://youtu.be/K2_W6KqzzgIWhat do you mean "I cheated the delivery time"? Did you do something to get fast delivery? Thanks
|
|
|
Usually the most reliable way is to run a core node daemon, e.g. bitcoind and use bitcoin-cli or the GUI debug console to query the network. bitcoin-cli getnetworkhashps bitcoin-cli getmininginfo
Ok thank you. So that would mean running nodes on each coin network I want to monitor? Someone has any reliable website for quark figures?
|
|
|
Hi, Just a quick question: giant x10 is said to mine at 10GH/s on quark. Yet, on coinwarz ( https://lc.cx/gnuu) it says the global total hashrate is between 20 GH/s and 200 GH/s (confirmed on whattomine here https://lc.cx/gnuL). Which means there would be the equivalent of only 1 to 20 giant x10 plugged in and mining quark?! I am missing something here, wrong with the maths, or is it just that the coinwarz and whattomine figures of total global hashrate on quark are wrong? Any other reliable sources of global hashrate? Thx
|
|
|
Thanks a lot for your answers, it's helping. Well now I have another issue, it seems the tab "miner status" doesnt show anything anymore when i click on it... https://framapic.org/YuR729YQcbpc/rheIg0GxNH6m.pngIs it just the pool isnt configured well or something else? I m a bit worried i harmed the miner by putting the frequency to 750. Thanks Go back to your system page and see what it says under hardware version? Probably just your miner configuration settings are wrong? Hi, I have 2 A3 and I have this issue with both : in system/overview/hardware version it says "Socket connect failed: Connection refused" Do you have any idea what i can do? I tried to set nat/pat config in my router to let port 3333 and 20550 go throug but it doesnt change anything. I tried to reset the miner, then it works for some time and get back to " Socket connect failed: Connection refused" Any idea? Thanks a lot! Post your miner configuration here . Its wrong (most probably) -- Where are you trying to connect to? Fix the configuration, and it will be fine. Right, I think i fixed it, i had forgot to put stratum+tcp:// before the miningpool address.. Cheers
|
|
|
Thanks a lot for your answers, it's helping. Well now I have another issue, it seems the tab "miner status" doesnt show anything anymore when i click on it... https://framapic.org/YuR729YQcbpc/rheIg0GxNH6m.pngIs it just the pool isnt configured well or something else? I m a bit worried i harmed the miner by putting the frequency to 750. Thanks Go back to your system page and see what it says under hardware version? Probably just your miner configuration settings are wrong? Hi, I have 2 A3 and I have this issue with both : in system/overview/hardware version it says "Socket connect failed: Connection refused" Do you have any idea what i can do? I tried to set nat/pat config in my router to let port 3333 and 20550 go throug but it doesnt change anything. I tried to reset the miner, then it works for some time and get back to " Socket connect failed: Connection refused" Any idea? Thanks a lot!
|
|
|
Thanks a lot for your answers, it's helping. Well now I have another issue, it seems the tab "miner status" doesnt show anything anymore when i click on it... https://framapic.org/YuR729YQcbpc/rheIg0GxNH6m.pngIs it just the pool isnt configured well or something else? I m a bit worried i harmed the miner by putting the frequency to 750. Thanks
|
|
|
|