 Show Posts
|
|
Pages: [1]
|
(also to all miners experiencing problems with PhoenixMiner 3.5 and below versions when trying to create the DAG): The versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. ETC passed epoch 235 a few weeks ago, and recently ETH also passed DAG epoch 235 and is now on 236. The unfortunate result is that the old version(s) of PhoenixMiner won't be able to create DAG or mine ETH or ETC any more - you must upgrade to PhoenixMiner 4.x. We have printed this warning here during the release of PhoenixMiner 4.0 but admittedly we could have done much better job with making it visible. We will pin this message in the first post too. After trying I also found 4.0b version does work now although it wasn’t working well before additionally it runs my rtx2070s hash a bit slower than versions 3.5 did
We are working on RTX20x0 optimizations but they won't be ready until the next release. i use Adrenalin 2019 Edition 18.12.2 and rx580 8gb but in this new 4.X ver i can't use -tt and -tmax and everything about fan control is not working in ver 3.5 i set this and worked perfectly -tt 47 -tmax 52 -fanmin 10 -fanmax 55 but now i use the same commend but when gpu go to 59 degree fan start on 24% and after it's cooling they be shutdown and again this Repeat 59start ......... |
|
|
|
I have 4 GPU but in 4.0b it's show 8 GPU :| after few sec it be close automatically 2018.12.10:10:45:57.670: main No CUDA driver found
2018.12.10:10:45:59.996: main OpenCL driver version: 18.10/11
2018.12.10:10:45:59.996: main OpenCL driver version: 18.8/9
2018.12.10:10:45:59.996: main Available GPUs for mining:
2018.12.10:10:45:59.996: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU2: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU4: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU6: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU7: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU8: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:46:00.015: main ADL library initialized You have two different versions of the OpenCL driver (the old version wasn't uninstalled properly). The proper way to fix this is to use DDU to remove all AMD drivers then install the preferred driver. The quick and dirty way is to add -gpus 2468 to your command line and ignore the "ghosts" of your cards. nice dirty way , -gpus 2468 worked There may be a problem for using this way ? and , thanks PhoenixMiner is the best :X  |
|
|
|
I have 4 GPU but in 4.0b it's show 8 GPU :| after few sec it be close automatically 2018.12.10:10:45:57.670: main No CUDA driver found
2018.12.10:10:45:59.996: main OpenCL driver version: 18.10/11
2018.12.10:10:45:59.996: main OpenCL driver version: 18.8/9
2018.12.10:10:45:59.996: main Available GPUs for mining:
2018.12.10:10:45:59.996: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU2: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU4: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU6: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU7: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU8: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:46:00.015: main ADL library initialized |
|
|
|
|
i thinks the new Adrenalin driver it's not woriking well with PhoenixMiner 3.5d
|
|
|
|
i'm using atomicwallet , after seeing this topic i'm really scared , and transfer all my coins to another wallet  I see another idiot! Do you use atomicwallet? Do not make me laugh! Your account has been active today after August 19, even though it was registered in January 2018. It does not seem like you really understand what we are talking about here. are you retarded or something ?  |
|
|
|
i'm using atomicwallet , after seeing this topic i'm really scared , and transfer all my coins to another wallet |
|
|
|
(20 hours ago) and all of my Amount mining are precalculation :|
what's going on with dwarfpool !! :| |
|
|
|
|
(20 hours ago) and all of my Amount mining are precalculation :|
|
|
|
|
why monitoring of worker with emails not working on dwarfpool ? https://dwarfpool.com/faq/Monitoring
To enable monitoring of your worker, use email as password. To disable monitoring, restart your miner without email as password.
Email will be send if no shares last 15 minutes.
In combine with WORKER_ID you can monitor your rigs separately. |
|
|
|
Anybody knows why today PM 2.9e does not report hashrate to Nanopool?  PhoenixMiner 2.9e Params: -nvidia -cdm 2 -cdmport 3333 -cdmpass 123 -minRigSpeed 188 -rmode 2 -tstop 65 -tstart 40 -logsmaxsize 0 -nvnew 0 Before 2018-05-07 12:30 -nvnew was absent and -mi 10 was used. After 2018-05-07 12:30 -mi was removed and -nvnew 0 was added. same issue |
|
|
|
PhoenixMiner 2.9e is officially released. Note that there are changes since 2.9d, so if you are running 2.9d, you should upgrade to this version. Here is the list of changes since the last beta version 2.9e (the full list of changes since the last official release can be seen in the first post of this thread): - Added detection of AMD Compute mode in the supported drivers and GPUs. The detection is performed when the miner starts and if the Compute mode is off on some of the GPUs, you will get warning messages.
- Added console command 'y' to turn on the AMD Compute mode if it is not turned on on some of the cards.
- Small improvement in the -logfile option: now you can insert $ chararcter in the name, which will be removed from the name but will force the miner to overwrite the log file on each startup, instead of appending to it.
- Fixed a problem with miner restart on some CUDA errors with Nvidia cards when the miner crashes instead of restarting.
- Some other small fixes and changes
You can download 2.9e from here: https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBwChecksums to verify your download: File: PhoenixMiner_2.9e.zip
SHA-1: e2b9c72e561ac0fdb4e3c9ebddd7d703a35da36c
SHA-256: 9817c89623025cf392a4e800a41cff96a87eee02e241d9f08d62dc43e0975e96
SHA-512: 33c78a73a53791c01bbfff2ad830ffd40d4007f69ca329300815ab1c189f744aafdc6683033cfcb0315db7f322e6dee44181b9dff2922b1fb408b0f04dba163b We are now working on 3.0, which will include auto-tuning capabilities and more. i'm back to 2.8C , i had better hashrate with that ! RX580 8Gb MSI Gameing X |
|
|
|
perfect , good job switch claymore v11.4 to PhoenixMiner 2.7c  |
|
|
|
Hashrate information about some pools:Zclassic: 60.89GH Ethereum: 31GH Pirl: 3.57GH Whale: 1.11GH DubaCoin: 868MH more at https://ucrypto.net/ i just want to use your pool but it have 5GH on ETH ! it's going tooo long to find block ? we have same issue with pool sexy |
|
|
|
|
