hi, i repaire the PSUs , and i assure to you, the 3 fan is not on monitoring, so, if fan is dead, the psu still working !

for sure if PSU is good or not, needed full kernel log, send this after 5min running

Yes of corse  

i extracted this if anyone is interested for APW9 Hex PIC (flash this on APW9+ for convert it on APW9)

https://easyupload.io/412gv8

me ? ?

Find 2020/06 firmware here, i uploaded this :

https://easyupload.io/u1edfa

I repair them, so I saw ... electronically yes they are the same !!!

there is only the assembly which difere ... the outputs are identical! (for busbars), but if you mount an APW9 + on a T17 or S17, this one will give you an error (POWER LOST) ...

Where is the problem in the PIC of the PSU, which will have to be reprogrammed;), without reprogramming the PIC, you cannot mount an APW9 instead of an APW9 + (or vice versa)

https://imgur.com/Qe0cOHb

I Say again, i want take them , how you want make transaction ?

UP

Hi all, i search L3+ hashboard for parts in EU.

If you have this, please make me your offer

thanks !

I learned to put on my eye and eye patches when I'm facing a wall,

Always the same, it's heavy ... good luck;)

I think exactly on what wndsnb says, he is certainly right !!!

On the other hand, you ask for help, have offered tests, and you do not do them ... so why come and ask us !!! ?

Do you even know that the original bitmain firmware makes the machine heat up much more? it is not for nothing that I asked you to test with my firmware, AT VERY LOW SPEED! and with the fans 100% !!! if that scares you, have you confirm that I am of confidence ...


So, try to see ...

Hi, obviously I'm not visible enough ... I offer my mod for T9+ for free available here:

https://drive.google.com/drive/folders/1yl0fym6ezHnKptGaHrWB6W2Rl2p9nwNp

WARNING, this is a mod, it unlocks the firmware, for this, you must first install a firmware before 2019 (if this is not already the case), then subsequently, update via the interface of the miner with my mod (929kb archive only).


You can start tuning at 650mhz and 840mv, the miner will run cooler, less power, and around 12TH

this mod is completely free;)

Hi, I see that you are using another firmware, I suggest one thing, I see that it starts in silent mode, it is not very good for the diag ...

please find my firmware, for T17 +, it is totally based on the original firmware, try to install it, force the fan to 100%, and try with a very low speed to see how it behaves, 400mhz and 1600mv to start , and send here your results with photo of the status of the miner if it works well



https://drive.google.com/drive/folders/1yl0fym6ezHnKptGaHrWB6W2Rl2p9nwNp

i purpose this for free to

is not possible remove it by flashing ... this firmware is by Bitmain, is LOCKED !

You need flash by SDcard for unlock, and after you need flash any firmware you want, if you need, download the files on my link, and if you want, try mine , is full unlocked, and allow you run your S17 with lower power

https://drive.google.com/drive/folders/1yl0fym6ezHnKptGaHrWB6W2Rl2p9nwNp

Your screen is with awesomeminer firmware ?

Hi everyone ! now releasing S17+ firmware with only 1% fee !

hi, the APW9 and APW9 + PSUs, so for ALL bitmain 17 series, start like this:

directly to the connection of the 2 cables C13, PCIE out directly + 12V

and only after, the firmware power up the 2nd power (14v - 21v)

yes I hear well, but I believe that the community is sometimes blind, and does not want to open its eyes ...

I don't name anyone, because I don't want to go to war with anyone, and I don't want to be called a detractor to put my firmware ahead of others and say that I'm the best because it's not the case...

people are sometimes stupid ... I'll tell you, recently I had a person interested in my firmware, he installed my firmware on an S17E, it contains 1.8% fee, I advise it on discord for about 2 hours, on how to install, and configure, I also advise him to optimize the settings, he shares screens with me so I can help him! he is happy but the minor is still heating up ... and suddenly, he tells me that he has totally cleaned his minor, that he was particularly dirty, now he does not heat any more, and he sends me a proof. screen, ..... he just installed another custom firmware just after cleaning !!! he tells me that the consumption has slightly increased but that now he no longer overheats, and as his (these in fact, he has 10), works well, he does not touch anything!

I find this a lack of respect for the time I gave him, and in addition he puts his face in my face! totally stupid and annoying!


and this hystory is not the only one, all that to say, people are sometimes totally stupid and blind ... just because we don't talk much about me I pence, yet I am legitimate as some know it here

no problem ! don't worry if i can help i do it

hi, i thinks your pool config is bad ... what pool you use ?

Hi,

you just need to monitoring "rejected", only Accepted and Rejected is important