|
In old topic yu said to use 13.12 drivers. But one card - 290x - works well with 14.4. So maybe it's not drivers only?
|
|
|
|
Claymore there is strange thing - i use 14.4 drivers and mine on R9 290X and R9 270X. Instance of miner, running on 290x is ok, but instance on 270x print next: Initializing...
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
YPOOL version... and does not work on new version
|
|
|
|
There is problem with wallet - both winx86 and x64 in debug log i see next strings - socket recv error 10054 I tried to make freshcoin.conf with nodes from first post, but still have same errors and wallet not sync |
|
|
|
My 270x (same as 270 but higher clocks) run well - about 5 CPD on 3.01
But i got another problem - on some rigs i get next errors on miner startup. Win 7 x64 and 14.4 driver. The only difference is CPU - i have AMD ones on rigs with problems and INTEL on working ones
Does it happen all of the times you start it on these rigs? Could you please confirm that it's v3.01 on them, not v3.0 (these error messages are related to pool+solo edition, i.e. ver.3.0) I confirm, version is 3.01, primegpu-ypool   |
|
|
|
Can support 270 now? Also in the future?  We haven't tested on 270, but it should work ok. Oh ah! I do the test with the latest versions, for 270, not very impressive performance, looking forward to the new! Or not set correctly? What values do you get? Also, what is the GPU load? Maybe we should get a 270 for the tests. Primecoin GPU miner ver. 3.01 ----------------------------------------------------------------- Mining time: 10:17:20 Est. Chains Per Day <CPD>:3.57 My 270x (same as 270 but higher clocks) run well - about 5 CPD on 3.01 But i got another problem - on some rigs i get next errors on miner startup. Win 7 x64 and 14.4 driver. The only difference is CPU - i have AMD ones on rigs with problems and INTEL on working ones   |
|
|
|
|
I have Gigabyte R9 280x with elpida memory and it gives me 370-380 h\s
|
|
|
|
Could someone please point me to a link that explains how I'd simply calculate the cpd to blocks to XPM payout for GPU mining?
Try this http://anty.info/primecoin-calculator/Claymore, where is new version??  Week ago you said about week time needed |
|
|
|
|
I'm getting a lot of "[P2P3]ERROR c:\projects\quazarcoin\contrib\epee\include\net\levin_protocol_handler_async.h:638 [112.225.136.242:23080 OUT]Failed to do_send()" errors in daemon console.
|
|
|
|
I am trying to mine monero on my windows 8.1 64bit system with cartalyst 14.4 and a 290x card but i am getting only 30h/s .
Is this because of Cartalyst 14.4 instead of 13?
Would an update to 14.6 beta fix it ?
It is topic about XPM mining! Go to monero topic ask there! Claymore, what about new 14.6 drivers? There is quite qood speedup on X1* algos! Would you adopt XPM miner to new drivers? |
|
|
|
|
Looks like Claymore is now working on XMR miner
|
|
|
|
|
2Claymore: is there chance of good speedup of "slow" cards, like 270x-7870 - they show 1/2 of 290x speed at other algo's and less in XPM
|
|
|
|
|
Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start
|
|
|
|
Have problem with 7870 rig - any time i start miner i have drivers crash. tried to lower threads - same result
1. Install Catalyst v13.12. 2. Disable overclocking. 3. Reboot computer. 1. 13.12 is there from very beginning 2. tried even downclocking - same result 3. many times Maybe problem is that CPU is A4-6300 APU? |
|
|
|
|
Have problem with 7870 rig - any time i start miner i have drivers crash. tried to lower threads - same result
|
|
|
|
there is official price - Each 0.00010000 BTC received will count for 1 vote but maybe dev shous talk to owners and they agree to support FUNK for free or less cost? |
|
|
|
|
maybe we'll just pay mintpal for votes to get listed there?
|
|
|
|
does that means that we have to sell our COIN ?
we have to make price grow, and so market cap will grow. So COIN needs to invite investors! |
|
|
|
|
Show Posts
