Show Posts
|
Pages: [1] 2
|
I have an 8x MSI 5700XT Gaming X platform. I have done Memory Toimming in all of them modifying the BIOS, and I get 54Mhs in each of them with memory at 1750.
The problem is when I try to increase the OC speed of the memory, to obtain a greater number of MHS, my Rig crash in random times, sometimes a few hours, sometimes many hours, sometimes a matter of minutes ... there are times that one of the graphics cards is placed at 0Mhs and within a few seconds the PC crashes, Other times PhoenixMiner gives an error with a lot of hexadecimal figures and freezes, and every few hours I have to restart the PC and restart everything.
I have even tried leaving it at 1750, and it has lasted 55 hours without stopping giving 54Mhs per GPU, but in the end it has frozen.
I have the power set to -46% and the consumption of the GPU is 113W each.
Could you tell me how to leave the rig stable?
Thank you very much
|
|
|
Could you help me with this? I watch a lot of videos in information about the 5700XT, with Hashrate of 56/57 MHS ...
I have managed to reach that speed by modifying the timings of the BIOS, but the RIG crashes, I can only keep it stable around 54.5Mhs, if I upload OC from memory to get more speed, it hangs in a few minutes or in several hours.
Is there a way to make the 5700XT stable with 56MHS and the Rig not crash?
If you want to be stable after overclock you should raise the voltage and/or lower the target temperature. As the voltage of memory could not be change for 5700XT your only chance is to lower the target temperature -tt which will indirectly reduce the memory temperature. You can aslo lower -cclock and -cvddc in order to reduce the temperature of the memory indirectly too. Thank you very much for answering but I don't think that's the problem, because the temperature of my GPUs is between 45 and 55 degrees all day. What temperature should the memory have to avoid having blocking problems with a higher OC? I didn't know that reducing the core clock would lower the memory temperature, is this true?
|
|
|
Could you help me with this? I watch a lot of videos in information about the 5700XT, with Hashrate of 56/57 MHS ...
I have managed to reach that speed by modifying the timings of the BIOS, but the RIG crashes, I can only keep it stable around 54.5Mhs, if I upload OC from memory to get more speed, it hangs in a few minutes or in several hours.
Is there a way to make the 5700XT stable with 56MHS and the Rig not crash?
|
|
|
Good morning to everybody
I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.
I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?
I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?
Thank you very much and sorry for the inconvenience.
You are already mining with excelent hashrate, do you know the temperature of your vram? (memory temperature) while mining? I have the same card as you, but I didn't touch in the bios and mine are doing 53mhs with 110w With this tool: More power tool : https://www.igorslab.de/morepowertool-amd-radeon-rx-5700-und-rx-5700-xt-tweaking-and-overclocking-software/You can decrease the core clock voltage to 725mv and you'll reduce the power, usage it's easy to use and you will only change the parameters that your windows reads of your card, leaving the bios untouched And about that videos with 61mhs it's only a command you put on the .bat of your miner, but it's not stable, your card will submit almost all invalid shares Thank you very much for answering. I was going crazy trying to find a way to get 61 Mhs, and in the end it turns out I'm having a good hashrate ... Temp of my card is 46º with 60% FAN speed I have tried to lower the core voltage with MSI Aferburner to 750mV, but when doing this the card always returns 0Mhs, and I must restart the computer to return it to normal. Are you saying that with MorePowerTool I can lower the power without having to flash the BIOS again? Could you tell me where is the value that I should modify? Many thanks.
|
|
|
Good morning to everybody
I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.
I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?
I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?
Thank you very much and sorry for the inconvenience.
may i know what Mh/s with default bios 5700XT, please tell us b4 and after mh/s because i'm planning to buy this card but i will never flash bios With Stock values around 50Mhs and with OC about 53 Mhs
|
|
|
Good morning to everybody
I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.
I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?
I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?
Thank you very much and sorry for the inconvenience.
|
|
|
Good morning to everybody
I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.
I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?
I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?
Thank you very much and sorry for the inconvenience.
|
|
|
1070ti Dont work on W10 GRIN C31. Out of Memory...
|
|
|
How do you do to calculate the hashrate of X16R?
Are you constantly changing the algorithm, how do you mean XXX Mhs? What do you mean exactly?
|
|
|
I have Windows wallet 4.0.1, I am mining in an address of that wallet.
Will I lose the mine XVG if I do not update to 4.0.2? How do I download 4.0.2 on Windows?
How do I transfer the balance to the new Wallet?
Thank you
|
|
|
What is the best algorithm to mine shield with 1070?
I have seen that it can be mined with 5 different ones, and I can not find any simulation
|
|
|
I have downloaded the Wallet for Windows, but it does not work, only windows appear but the Wallet Gui does not appear.
How should i do?
Any help?
|
|
|
I have downloaded the Wallet for Windows, but it does not work, only windows appear but the Wallet Gui does not appear.
How should i do?
|
|
|
Thanks, I got it. In the Readme file, it appears that NiceHash is normalized with 0.96, what value do you use for Blazepool, Zpool, Zergpool, etc? Thank you
|
|
|
Can I use a differrent address for NiceHash? I do not know do it. Can you help me to configure a new address ONLY when Nemos Miner choice NiceHash? Thanks
|
|
|
I have version 3.0 yesterday. How do I update it?
|
|
|
Hello:
I have a question, can you help me?
I would like to switch between Blazepool and NiceHash with the NemosMiner, but I would like to mine in my NiceHash address of the Internal Wallet.
This means that when NemosMiner selects NiceHash, I would like the BTC address to be different, is it possible to specify a different BTC address for NiceHash and for the rest of the Pools?
Thank you very much
Please?
|
|
|
Hello:
I have a question, can you help me?
I would like to switch between Blazepool and NiceHash with the NemosMiner, but I would like to mine in my NiceHash address of the Internal Wallet.
This means that when NemosMiner selects NiceHash, I would like the BTC address to be different, is it possible to specify a different BTC address for NiceHash and for the rest of the Pools?
Thank you very much
|
|
|
This software mine Yescrypt?
|
|
|
And I can do something to solve it?
I have disabled the PPLS until I see how it can be fixed.
|
|
|
|