 Show Posts
|
|
Pages: [1] 2 »
|
Anyone have issues with hashing boards randomly disappearing and reappearing? Tried replacing the USB hub and cables with no change.
Sometimes, changing pool automatically or pools which don't give enough work for miners. |
|
|
|
can you post 8.15 firmware. Obviously can not download it from their website.
I am guessing you have one bad pump. Just unplug one at a time and boot. If everything looks the same with the pump unplugged then that is your guy. If nothing comes on then you have the good pump unplugged.
Just curious how many out there are still running terraminers or all they all shut off?
I can't post but I could send you, send me a PM I believe it is not a pump, because a lot of troubles in 2 cta's, i don't know what can i do with that |
|
|
|
Here's what I know about the D45 light: Obviously if it is on and red that's bad! I had a red D45 on one board that was fixed by simply re-applying the thermal paste - this can be verified by downloading the diagnostic file and following the logic - i.e. everything boots, then slowly overheats and shuts down - as opposed to not starting at all. So, that was my first instance with the red D45 Furthermore, I know if a pump is not working or not connected it will go straight to the red D45 without even trying to start beyond the first flicker of all the lights D37-D44. What I did (I'm not smart with programming) is download NotePad++ and used it to search and highlight words like "overtemp", "fail", and "error" in the diagnostic file to see where things are going wrong. Although there is a lot I do not understand - I simply compared it to one of my normal machines. By the way, SW1 (push button) on the back of the board is apparently the reset switch - used it to diagnose things while it was running - simply restarts the respective board. My assumption is: D37-D44 are lights representing each of the 8 cores and by sequencing yellow it means everything is normal. If it is skipped in the sequence it must be bad or not responding. D45 is some sort of error indicator whereas OFF is normal and Red is bad but does not necessarily always mean the same thing?  Would be nice if between all of us here we could put together a guide of known issues/fixes and a decoding key for the diagnostic report in a public document that doesn't require reading this entire thread - anyone know how to do this? More to follow as I troubleshoot... I know this is a little old but I wanted to put my 2 cents in for future help. I also had a red D45 and a core not working. I was able to remove the pump and smack it with a screwdriver a few times and get the pump working again. If that pump does not work, the core will be shut off and that light will be red. Not very scientific, or high tech, but a pump is a pump. When they dont move, smack em! Hi Now I have the same problem. I Bought 2 TMIV. Once is good always Another worked for one week then it started with troubles, Cointerra support said me tO upgrade 8.15 firmware, that killed machine for one month then I minned through PC with USB, but Cointerra Support help me and after one month BBB worked again, but boards are with troubles, the CTA0 is working without D40 light 630 gh, another CTA1 is only mining 280 GH and D37 to D41 are working (4 Yellow Lights turned on), now I have 8.15 FIRMWARE WORKING but machine still with the same troubles. I touch Pumps; in CTA 0 are working 2 pumps but I felt only 3 hoses are working when I touched they. CTA1 is working only One hose from the one pump which is working. Of course Like you said D45 show that troubles. But when I turn on machine, I can see all lights are turning on for once time. - I would like to know which is the problem. Pumps, Power sources, boards, cables? |
|
|
|
Hi Dr Ckolivas
Is the New version without ZOMBIEs for cointerra devices?
Yes it is. ThanksĦĦĦĦĦ |
|
|
|
|
Hi Mr Ckolivas
Is the New version without ZOMBI's for cointerra devices?
Thanks
|
|
|
|
Good Night
Mr CKOLIVAS
Are there Changes for TERRAMINER ASICS?
Shoud I change from 4.3.4 to New CGMINER released July 17th?
Please
Thanks
No. THANKS for adviceĦĦĦĦĦĦ |
|
|
|
|
Good Night
Mr CKOLIVAS
Are there Changes for TERRAMINER ASICS?
Shoud I change from 4.3.4 to New CGMINER released July 17th?
Please
Thanks
|
|
|
|
I would like Support for COINTERRA ASICS please.
See cointerra branch for a hack, or help develop cointerra_fresh (it doesn't get full hashrate, and haven't figured out why). Where is info or files do you need to do a great work? I could help you with that? |
|
|
|
Hi
Wit TERRACOIN ASICS Can I regulate power like beaglebone?.
I want to put level 7 because it breakdown the light in house each time
--ps-load Use a number from 1-100 probably 70 for level 7 Where I should put that? if i Put in shortcur, does it work? "C:\Documents and Settings\LARTAS\Escritorio\Minning ASIC\cgminer-4.3.4-windows\cgminer.exe" -o us3.eclipsemc.com:3333 -u LARTAS_luis4 -p xxxx --ps-load 70 CGMINER Opened AND i CAN SEE 0.70V, is that right and showing that is working or not? Value is in % then I would believe is not 70, perhaps 77 Please |
|
|
|
|
I put that in shortcut? After put Pool and user?
|
|
|
|
|
Hi
Wit TERRACOIN ASICS Can I regulate power like beaglebone?.
I want to put level 7 because it breakdown the light in house each time
|
|
|
|
|
I would like Support for COINTERRA ASICS please.
|
|
|
|
|
Yes I did before but
Booth ASICS are conected to Mixer USB.
I want each ASIC to computer
Can I connect 2 Printer cables to each one ASIC to Computer?
|
|
|
|
|
Hi
Why I obtain a lot of ZOMBIES each day? with terraminer
Energy?. How can I fix that?. What should I buy to solve that?
Thanks
|
|
|
|
|
Hi
My terraminer which is good
One CTA is showing high temperatures
CTA0 Metrics High Low Avg
Core Temp 1 (°C) 91.14 63.74 77.77
Core Temp 2 (°C) 64.54 56 59.57
Ambient Temp (°C) 65.5 56 59.93
Fan Speed (RPM) 4782 4248 4,542
Pump Speed (RPM) 2990 2967 2,979
Who can help me? Before it get worst
|
|
|
|
The cointerra changes are for new firmware only which you won't have.
But Firmware is with Beaglebone. Perhaps I need to update USB Driver for windows Goldstrike For CGMINER 4.3.5 works. But There isn't newer Yes but the firmware updates both the mining device and the beaglebone cgminer. There is no new firmware yet. This code is all experimental for the next firmware which is not released yet so regular users should not use it... Yes I think the problem is in that device http://www.sfcable.com/1504-SF-12.html?utm_medium=shoppingengine&utm_source=productadssomething like that which TERRACOIN Put there I want to conect each CTA to Computer but How can I do to CTA'S don't appear like COM Ports and Appear like USB Devices |
|
|
|
Thanks. I hope It works. GreatĦĦĦ
The new release was not specifically for your problem though it might help if you're lucky. You seem to still have hardware instability. Yes . i have try and it not started, says differente "checksum bad". I will use again 4.3.4 The cointerra changes are for new firmware only which you won't have. But Firmware is with Beaglebone. Perhaps I need to update USB Driver for windows Goldstrike For CGMINER 4.3.5 works. But There isn't newer |
|
|
|
Thanks. I hope It works. GreatĦĦĦ
The new release was not specifically for your problem though it might help if you're lucky. You seem to still have hardware instability. Yes . i have try and it not started, says differente "checksum bad". I will use again 4.3.4 |
|
|
|
|
Thanks. I hope It works. GreatĦĦĦ
|
|
|
|
|
