@halminer,

To create a hot and a cold area is a really good idea. But I wont use cardboard. Just pure for the safety. It can get on fire really fast.
I also have a small and a big farm. @ the small farm location I use cast walls.
https://ibb.co/nLvePy
https://ibb.co/bsQePy

I am not sure how much heat the Avelon powersupply generate. I did not create a hole for the powersupply because, the bitmain powersupply does not generate a lot of heat.

Anyway good luck with futher improvements.

Thank you for your interest.

If you could please specify your request, that would be very helpful.

Dear VonRau,

thanks for the fast reply.

Please try to download the firmware again. It could be a download issue.

In addition to that, we will provide a version 2, and you can try that out as well.

Kind Regards,
DolleTeam

Dear VonRau,

Please see the updated first Post. There is a light version available.

We will look into your inquiry and create a new firmware batch,

If you could please post a screenshot of the output you get after flashing, that would improve our ability to hep you.

Kind Regards,

DolleTeam

Thanks for this information.

Is the lite version running?

Download it from the google drive link in the main post. or click on this link https://drive.google.com/file/d/1NZrfQHqfnHrAgtFYASJx7c4HUrrF--oU/view
Open Antminer.
Click Upgrade Firmware and wait.

Congratulations. You can test the software.

Thank you guys for your patience!

We took a long time to make sure it all works the way we wanted and burned additional hashing boards  

The 1st versions are out there and ready for use. We still keep up our work and are dedicated to implementing Asic Boost so
we can all mine just like Bitmain itself!

@darkpoe This software will work with the T9. u can either ramp it up to 13,5 Th in normal settings or use the Wattage/hash sweet spot of 600Feq/850Mv.
We have a ratio above 10gh/s per watt with that setting.

we will keep you updated (more frequently   ) on our current progress.

Happy mining,

The DolleTeam.

We are working on ASICBOOST.

Here is our alternative to adjust your frequency and voltage. More updates will comming soon

https://bitcointalk.org/index.php?topic=2832499.0

The mining software will be released @ 02-07-2018 ll 12:00 +1GMT

@DarkPoe, I do not think it will work on the T9. We don't have a T9.

@HoloShot, Yes we can disable the fan. We are not testing the hardware. We focus first on the firmware. In the later phase, we are able to test if we can run more blades on 1 S9. I think it will work since there is 1 slot available.

@Likai31197, Yes we are working on auto reboot when one of the chips or board will fail. We also build in an auto reboot when the temps goes to high.

Dear community,

Like Dolle said we are verry bussy. I will try to keep you guys updated from time to time.

Right now we are able to undervolt / controll fanspeed and set freqencys on the S9 miner. We are testing multiple machines to see what settings are "safe" in normal opperation so we can adjust the web interface in such way the risks will stay to a minimum to the users. About the BMminer, yes Bitmain did a verry good job at putting some "Bitmain beneficial" software into the BMminer and the OS itselve as well.
I wont go into details about those things for now. All i can tell so far is that Bitmain is getting more and more creative to avoid people making there own software for their miners, atleast for their sha256 miners.

@ fanatic26, thanks for the NTP tip. We will work on that as well after we finish the product!
@Likai31197, we are not sure yet what the results will be when we finish the product, Right now we had the S9 running at 15.5 TH/s. This was just to see how fast we could go, our testing phase isnt done yet. Our first goal is more TH/s with less power and no more shady software inside.

Dear community,

Website: http://www.dollemizer.com

I'm here to tell you that we made the Dollemizer875 Version to adjust your S9, S9i or T9 miner (Tested).
With this Upgrade, you will experience a new interface to adjust your miner settings and get more hash rate or less power usage.
We have tested these versions on various S9, S9i, and T9 miners and can say they work very stable compared to other firmware out there.  


DOWNLOAD FIRMWARE: (improved Firmware boosted up to 875 MHz!)

- Europe version: https://drive.google.com/open?id=1TdsON3q9WQUN-4G_OXRKP91k4dhYYmw0
- USA version: https://drive.google.com/open?id=1jyQ_XjlLJA0YN34KYPF7SFXuFws1x8qX
- China Version: https://drive.google.com/open?id=1DUTrVImPhqV4_tWmAUP9pDkWWKVofpGm
- Canada Version: https://drive.google.com/open?id=14CiW7_NV_zM2Aky5OEBMb5RLBgKz0rRp
- Singapore Version: https://drive.google.com/open?id=1x8WbHVI-oO-c46_Oq7TcnbSgX8y-sq74

Choose the version which is closest to your region for the best experience!

Join our Twitter for the latest updates about our progress. https://twitter.com/dollemizer



How to upgrade your Antminer

•  Download the firmware
•  Go to your Antminer interface (IP-address of your Antminer)
  
•  Navigate to “System” -> “Upgrade” page https://ibb.co/ensOZy]Upgrade Page
•  Click on Choose file at “Flash new firmware image” https://ibb.co/cjBHuy
•  Select the firmware “Lite or Basic” you just downloaded. https://ibb.co/eBZsSJ
•  Click “Flash image”
•  Click “Yes” in the popup
•  Wait 1-5 minutes for the firmware upgrade
•  IMPORTANT DO NOT: Do not power off the miner or unplug the ethernet cable during the firmware upgrade.
  
  
  
  
  Next versions to come will include:
  
  -Asic Boost
  -Higher adjustment settings (1000 Mhz) (Update> Soon 1175 MHz)
  -Fan Speed Optimization
  -Disable Fans
  -Remove Antbleed inside the BMminer
  -Autotune configuration
  -Full control for each chain
  
  Please let us know what extra features we should implement as well in your opinion down below in the comment.
  And join our Slack channel:Join Dollemizer Slack Channel
  
  If you face any issue's don't hesitate to contact us on Bitcointalk or slack. Our team will take a look at it and resolve the incident.
  
  
  Please make sure u know what you're doing. The software will allow you to make huge changes to your machine which if not used correctly might bring damage to it.
  We take no responsibility or liability for any damages including. This software comes with a small build in fee of 1,9%.
  
  We thank you for supporting our quest for better mining capabilities for everyone!
  
  The Dolleteam!
  
  REVIEW:
  
  Guntis V from Mineshop.eu is reviewing our product and explains it in detail: Youtube-Video